• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.487-500
• /
• 2021

To evaluate the geochemical characteristics and assess the pollution in surface sediments of the Nakdong River estuary, two sites adjacent to the estuary bank (Hh1 and Hh2) and one site at the upper part of the estuary bank (Hh3) were investigated. The surface sediments were analyzed for their contents of metals (Cu, Pb, Ni, Cr, Zn, and Al), organic matter (IL, COD, TOC, and TN), and grain size from 2018 to 2020. As a result of the pollution assessment, there was little anthropogenic contamination by most of the metals. The surface sediments in Hh2 had comparatively abundant silt and clay, whereas the other sites were mainly composed of sand. The organic index and contents of organic matter were highest at Hh2. Multivariate statistical analyses (cluster analysis and Pearson correlation analysis) showed that the contents of organic matter and pollution were associated with fine sediment. These results suggest that the geochemical characteristics were changed by the estuary bank built in the research area and that the increase in fine sediment attributable to the low-energy environment resulted in an increase in organic matter pollution.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.13.1-13.5
• /
• 2013

Objectives: Potential environmental risks caused by chemicals that could be released from a recycled plastic product were assessed using a screening risk assessment procedure for chemicals in recycled products. Methods: Plastic slope protection blocks manufactured from recycled plastics were chosen as model recycled products. Ecological risks caused by four model chemicals - di-(2-ethylhexyl) phthalate (DEHP), diisononyl phthalate (DINP), cadmium (Cd), and lead (Pb)-were assessed. Two exposure models were built for soil below the block and a hypothetic stream receiving runoff water. Based on the predicted no-effect concentrations for the selected chemicals and exposure scenarios, the allowable leaching rates from and the allowable contents in the recycled plastic blocks were also derived. Results: Environmental risks posed by slope protection blocks were much higher in the soil compartment than in the hypothetic stream. The allowable concentrations in leachate were $1.0{\times}10^{-4}$, $1.2{\times}10^{-5}$, $9.5{\times}10^{-3}$, and $5.3{\times}10^{-3}mg/L$ for DEHP, DINP, Cd, and Pb, respectively. The allowable contents in the recycled products were $5.2{\times}10^{-3}$, $6.0{\times}10^{-4}$, $5.0{\times}10^{-1}$, and $2.7{\times}10^{-1}mg/kg$ for DEHP, DINP, Cd, and Pb, respectively. Conclusions: A systematic ecological risk assessment approach for slope protection blocks would be useful for regulatory decisions for setting the allowable emission rates of chemical contaminants, although the method needs refinement.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.116-122
• /
• 2023

In addition to analyzing the hydrogen economy trends of the international community (Korea, the United States, Europe, Japan, etc.), which is being promoted to realize a carbon-neutral society, this study compared and analyzed the differences between the gaseous hydrogen refueling station, which is a key hydrogen-using facility close to the people, and a liquefied hydrogen refueling station that is scheduled to be built in the future. In addition, SAFETI, a quantitative risk assessment program, was used to analyze the safety of liquefied hydrogen refueling stations and In consideration of the individual and societal risks and the ranking of risks by facility, which are conditional allowable areas, a plan to improve safety such as facility layout was proposed

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.267-276
• /
• 2016

Objectives: This study, aims to examine the distribution characteristics of asbestos-containing building materials; risk assessment and area of distribution of asbestos-containing building materials depending on year of construction; building materials; types of building materials; and usage in public buildings in order to create fundamental data for safe management of public buildings. Methods: The asbestos investigation was conducted by an asbestos research institution from March to May 2014, targeting 41 public buildings which were subject to asbestos investigation in South Chungcheong-do Province. With respect to 381 presumed asbestos-containing materials, an investigation was conducted into whether they contained asbestos, asbestos type, content, year of construction, and use in the building were examined, and a risk assessment was performed. Results: Asbestos-containing building materials were used in 35 buildings(85.4%). Among them, 31(88.6%) were public buildings. Asbestos was detected in 73% of 381 suspected asbestos-containing materials, which were mostly ceiling materials (85.2%). The older the buildings, the more they showed a tendency to have a significantly higher risk assessment score. The ratio of average area with asbestos-containing building materials to total floor area was 57.6%, 44.1%, and 17.8% for buildings built in the 1980s, 1990s, and 2000s, respectively. This showed a tendency to be significantly higher with the age of the building. Conclusions: From the results above, it can be concluded that with the age of the buildings, the risk assessment score and the ratio of average area with asbestos-containing building materials to total floor area became significantly higher. Given the concern about the exposure to asbestos of residents and civil petitioners, safety management of older public buildings and measures for dismantling and removal of asbestos-containing building materials should therefore be urgently established.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.559-575
• /
• 2021

Due to the increase in ground excavation work, the possibility of ground subsidence accidents is increasing. And it is very difficult to prevent these risk fundamentally through institutional reinforcement such as the special law for underground safety management. As for the various cases of urban ground excavation practice, the ground subsidence behavior characteristics which is predicted using various information before excavation showed a considerable difference that could not be ignored compared to the results real construction data. Changes in site conditions such as seasonal differences in design and construction period, changes in construction methods depending on the site conditions and long-term construction suspension due to various reasons could be considered as the main causes. As the countermeasures, the safety management system through various construction information is introduced, but there is still no suitable system which can predict the effect of excavation and risk assessment. In this study, a web-based system was developed in order to predict the degree of impact on the ground subsidence and surrounding structures in advance before ground excavation and evaluate the risk in the design and construction of urban ground excavation projects. A system was built using time series analysis technique that can predict the current and future behavior characteristics such as ground water level and settlement based on past field construction records with field monitoring data. It was presented as a geotechnical data visualization (GDV) technology for risk reduction and disaster management based on web-based system, Using this newly developed web-based assessment system, it is possible to predict ground excavation impact prediction and risk assessment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.51-59
• /
• 2004

The geological research as a part of HLW disposal program in Korea is carried out to provide necessary data for the establishment of the reference repository system in term of design and safety assessment in the crystalline rock terrains. Six deep boreholes were drilled to obtain hydrogeological and hydrochemical data from Jurassic granites in the Yuseong area, Korea. The core observation, televiewer logging and hydraulic testing were carried out during and after drilling and multi-packer system were installed in the boreholes of 500m depth for hydraulic and hydrochemical monitoring including environmental isotopes. The integration of hydrogeochemical and hydrodynamic data would be built greater confidence for the understanding of groundwater system in fractured rock mass. This geoscientific program could be possible to suggest a general guideline to develop the reference disposal concept of high-level radioactive waste in Korea.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.1
• /
• pp.34-44
• /
• 1997

The Belgian Nuclear Research Centre(SCK${\cdot}$CEN) has been a pioneer of the peaceful uses of nuclear energy after over forty years of existence. Recently, SCK${\cdot}$CEN's financial support of doctoral and postdoctoral research in close collaboration with universities has been a vital ingredient for securing a quality profile committed to the pursuit of execllence. FLINS, Fuzzy Logic and Intelligent technologies in Nuclear Science, was initially built within one of the postdoctoral research project at SCK${\cdot}$CEN. Among SCK${\cdot}$CEN's activities which will have an important impact on its scientific future, the application of fuzzy logic and intelligent technologies in nuclear science and engineering opens new domains in radiation protection, safety assessment, human reliability, nuclear reactor control, waste and disposal, etc. In this paper, we review the available literature on fuzzy logic in nuclear applications. We then present the initiative of R&D on fuzzy logic applications at SCK${\cdot}$CEN, namely, (1) safety control for a nuclear reactor, and (2) a safety evaluation model for nuclear transmission lines. By these two examples of nuclear applications, we illustrate the potential use of fuzzy logic in nuclear safety issues.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.2
• /
• pp.363-374
• /
• 2015

Instrumentation and control(I&C) system has been mainly designed and operated based on analog technologies in existing Nuclear Power Plants(NPPs). However, As the development of Information Technology(IT), digital technologies are gradually being adopted in newly built NPPs. I&C System based on digital technologies has many advantages but it is vulnerable to cyber threat. For this reason, cyber threat adversely affects on safety and reliability of I&C system as well as the entire NPPs. Therefore, the software equipped to NPPs should be developed with cyber security attributes from the initiation phase of software development life cycle. Moreover through cyber security assessment, the degree of confidence concerning cyber security should be measured and if managerial, technical and operational work measures are implemented as intended should be reviewed in order to protect the I&C systems and information. Currently the overall cyber security program, including cyber security assessment, is not established on I&C systems. In this paper, we propose cyber security assessment methods in the Software Development Life Cycle by drawing cyber security activities and assessment items based on regulatory guides and standard technologies concerned with NPPs.

• Communications for Statistical Applications and Methods
• /
• v.27 no.3
• /
• pp.269-284
• /
• 2020

This study compares two teaching methods in an introductory statistics course at a large state university. The first method is the traditional lecture-based approach. The second method implements a flipped classroom that incorporates the recommendations of the American Statistical Association's Guidelines for Assessment and Instruction in Statistics Education (GAISE) College Report. We compare these two methods, based on student performance, illustrate the procedures of the flipped pedagogy, and discuss the impact of aligning our course to current guidelines for teaching statistics at the college level. Results show that students in the flipped class performed better than students in traditional delivery. Student questionnaire responses also indicate that students in flipped delivery aligned with the GAISE recommendations have built a productive mindset in statistics.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.3
• /
• pp.29-41
• /
• 1996

The purposes of this study were to develope some techniques which can be used in the landscape simulation process using PC based computer grahics. As a result, a couple of utilities were programmed in AutoLISP language. The one(DSLINE.LSP) is to digitize 2-dimensional structuer forms in the interactive mode considering error handling, and the other one (IMPOST.LSP) is for superimposing and visualizing the digitized plan data to 3-dimension solids & surfaces referring to topographic elevations of meshes in digital terrain model. By applying utilities to present site, the followings may be described. 1) The utility DSLINE.LSP for digitizing simplified building structure form were proved to be easy to input data of polygons including orthogonal edges by handling user coordinates system and checking invalid intersection and default colsing. 2) IMPOST.LSP utility for superimposing and visualizing tool were proved to be more complicated and speedy in calculating process compared with a practical application of modeling tool before rendering process in landscape simulation of built environment on topographic relief, on specially mesospace level of assessment.