• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.23-27
• /
• 2002

Two $^{192}$ Ir HDR brachytherapy sources were calibrated with a Farmer ionization chamber in air method and in a PMMA cylindrical phantom. The calibration air method used ionization chamber with buildup cap, and 8 variation distances for center-to-center of the source to chamber. In the optimum distance the measured activity, especially for the high activity source, deviation was 0.3% from the activity provided by manufacturer. Calibration with a PMMA cylindrical phantom was less sensitive, and suitable for quick check method with accuracy less than 10%.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.5
• /
• pp.265-272
• /
• 2017

This paper presents the dynamic modeling, analysis, and control of an AC/DC/AC-assisted, self-excited induction generator connected to the grid. The dynamic model includes wind turbine models with pitch control, gear boxes, self-excited induction generators, excitation capacitance, inductive load models, controlled six-pulse rectifiers, and novel state-space models of a grid-connected inverter. The system has been simulated to verify its capabilities of buildup voltage, stator flux response, stator phase current, electromagnetic torque, and magnetizing inductance variation during both the dynamic and steady states with a variable-speed prime mover. The complete setup of the above dynamic models was simulated using MATLAB/SIMULINK.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.157-158
• /
• 2015

본 논문은 직렬 보상 커패시터 사용으로 인해 발생될 수 있는 SSR(Subsynchronous Resonance) 현상을 해석하기 위한 도구로서 EMTDC의 활용에 관해 다루고 있다. EMTDC를 이용한 순시치 기반의 계통 해석은 주파수 스캔이나 Eigenvalue 계산법의 한계를 보완할 수 있다. EMTDC 기반 해석의 효용성을 검증하기 위해 IEEE 2nd Benchmark 모델을 PSCAD/EMTDC로 구현하였고, 시뮬레이션을 통해 유도 발전기 효과와 비틀림 상호작용 및 축 토크 증폭 현상을 검증했다. 또한, SSR의 억제 수단으로 SVC와 보조제어기를 발전기단에 투입하였고, 그 억제 효과를 시뮬레이션으로 검증하였다.

• 한국벤처창업학회:학술대회논문집
• /
• 2006.11a
• /
• pp.221-249
• /
• 2006

최근 세계는 경제블록화가 급속한 진행되는 한편 EU가입국의 확대, 중국의 WTO 가입을 비롯하여 정보통신기술의 발달에 따른 무역 패러다임의 변화 등으로 급격한 전환기를 맞이하고 있다. 이러한 무역환경의 변화에 신속히 대처하기 위해 우리나라는 폭넓은 무역지원정책을 추진하고 무역관리체계를 정비하고 있음에도 불구하고 기대만큼의 실효를 거두지 못하고 있으며, 중소기업들은 국내외 경기의 지속적인 침체로 점차 해외경쟁력을 잃어가고 있다. 수출진흥을 위한 정책지원 전략은 무역환경의 변화에 대한 정확한 인식을 바탕으로 하여 무역중소기업의 무역마케팅구조를 근본적으로 개선하는데 궁극적인 목표를 두고 현장실무지원 중심으로 체계적이고 종합적인 수출지원사업 실행방안을 마련하는 일이 우선시 되어야 할 것이다. 따라서 본고에서는 국내 수출중소기업들을 대상으로 설문조사를 실시하여 이를 바탕으로 정부 수출지원사업 활용현황과 무역진흥정책 추진에 따른 향후과제를 검토 분석해보고, 나아가 기업들과 정부 유관기관과의 협력방안을 도출하는데 있다.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.344-349
• /
• 2009

Optimum dyeing conditions of green tea extracts were investigated toward nylon, cotton, rayon, and tencel fabrics. Affinity of green tea extracts was exhibited much higher onto nylon fabric than the other cellulosics. As for nylon, the adsorption was increased with the increase of dyeing temperature and optimum dyeing pH was around 4~6. Buildup property of green tea extract was good showing a linear relationship between concentration of the extracts and color strength of dyed fabrics within experimental range. Color fastnesses were good to excellent in general except to light.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.376-376
• /
• 2000

Several algorithmic models have been proposed to estimate software cost and other management parameters. In particular, early prediction of completion time is absolutely essential for proper advance planning and a version of the possible ruin of a project. However, estimation is difficult because of its similarity to export judgment approaches and for its potential as an expert assistant in support of human judgment. Especially, the nature of the Norden/Rayleigh curve used by Putnam, renders it unreliable during the initial phases of the project, in projects involving a fast manpower buildup, as is the case with most software projects. Estimating software development effort is more complexity, because of infrastructure software related to target-machines hardware and process characteristics should be considered in software development for DCS (Distributed Control System). In this paper, we propose software development effort estimation technique using adaptive neural fuzzy inference system. The methods is applied to case-based projects and discussed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.1-6
• /
• 2001

Today's paper industry tries to use greater amount of high yield pulp and recycled fiber and to close mill water system, which results in higher fines content and buildup of organic and inorganic contaminants in white water system. Researches are being focused to develop chemical additives that provide good retention and drainage in a closed papermaking system. A microparticle retention system consisted of cationic guar gum and anionic colloidal silica so has been developed to meet the requirements for improving machine speed and product quality. The objective of this investigation was to determine the effects of the degree of cationic guar gums, charge density and structure of anionic colloidal silica sols, and the degree of system closure on the performances of this microparticle retention system. Cationic guar gums and anionic colloidal silica sols with higher charge densities showed better retention performance. Particularly, wider maximum in retention was obtained when structure colloidal silica was used suggesting as mechanism of microparticle bridging is functioning in this system.

• Laser Solutions
• /
• v.15 no.4
• /
• pp.16-19
• /
• 2012

Due to the fact that the dimensions of circuit lines of IC substrates have been forecast to reduce rapidly, engraving the circuit line patterns with laser has emerged as a promising alternative. To engrave circuit line patterns in an IC substrate, we used a projection ablation technique in which a metal (INVAR) mask and a DPSS UV laser instead of an excimer laser are used. Results showed that the circuit line patterns engraved in the IC substrate have a width of about 15um and a depth of $13{\mu}m$. This indicates that the projection ablation with a metal mask and a DPSS UV laser could feasibly replace the semi-additive process (SAP).

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.482-489
• /
• 2006

This paper presents the generalized dynamic modeling of self-excited induction generator (SEIG) using state-space approach. The proposed dynamic model consists of induction generator; self-excitation capacitance and load model are expressed in stationary d-q reference frame with the actual saturation curve of the machine. An artificial neural network model is implemented to estimate the machine magnetizing inductance based on the knowledge of magnetizing current. The dynamic performance of SEIG is investigated under no load, with the load, perturbation of load, short circuit at stator terminals, and variation of prime mover speed, variation of capacitance value by considering the effect of main and cross-flux saturation. During voltage buildup the variation in magnetizing inductance is taken into consideration. The performance of SEIG system under various conditions as mentioned above is simulated using MATLAB/SIMULINK and the simulation results demonstrates the feasibility of the proposed system.

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.41-46
• /
• 1999

Spatial and temporal dynamics arising in a photorefractive crystal(BaTiO3) during the process of double phase conjugation was studied experimentally. We studied the dynamical effects caused by the buildup of the diffraction grating and turn on of phase conjugated beams, as well as the spatial effects caused by the finite transverse coupling of beams and the propagation direction of beams. We observed conical emission in DPCM. We believe that various temporal and spatial instabilities are due to movement of the nonlinear grating. For a real beam coupling and constructive interaction of interference fringes in the crystal, we observed steady, periodic, irregular temporal behavior. And, by the calculation of the correlation index, we found that the spatial correlation decreased as the transverse interaction region was increased.