• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.291-294
• /
• 1996

We present the experimental results of high quality factor (Q) inductors fabricated on high-resistivity silicon wafer using standard CMOS process without any modificatons such as thick gold layer or multilayer interconnection. This demonstrates the possibility of building high Q inductors using lower cost technologies, compared with previous results using complicated process. The comparative analysis is carried out to find the optimized inductor shape for the maximum performance by varying the thickness of metal and number of turns with rectangular shape.

• 대한가정학회지
• /
• 제43권10호
• /
• pp.1-23
• /
• 2005

This study proposes design factors for Korean style ecological apartment for application in Cheongju. Library and internal surveys were performed to summarize the concept of locality in housing and to determine the present condition of apartment estates which were introduced with design factors according to locality, traditionalism, or ecology, fold surveys were carried out at 10 apartment estates to investigate the present condition of management and residents's un. The interviewees were concierges and representative residents. The following design factors for Korean style ecological apartment to be applied in Cheongju were proposed; layout and building shape according to climate as natural environment, landscape factors according to cultural assets as human environment, adolescent spaces according to population as social environment, road plan according to 'Cheongju Garosu-Gil' civil environment.

• 설비공학논문집
• /
• 제27권12호
• /
• pp.620-625
• /
• 2015

The summer climate is very hot and humid in Korea. Humidity is an important factor in determining thermal comfort. Recently, research on dehumidification device development has been attempted to save the energy required for operating the dehumidifier. Existing dehumidification systems have disadvantages such as wasting energy to drive the compressor. Meanwhile, dehumidification systems with membranes can dehumidify humid air without increasing the dry bulb temperature. Therefore. they don't have to consume cooling energy. In this paper, the installation conditions for a membrane system were analyzed to improve the shape and optimum performance of the system. The results showed that the distance between elements was the critical system design factor, and that a distance of 20 mm was the optimal condition for the pressure drop and flow characteristics of the internal air flow.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.461-470
• /
• 2020

본 연구는 건설 전주기 (기획, 설계, 시공, 관리) 과정에서 생성되는 건설 CALS(Continuous Acquisition & Life-Cycle Support) 시스템 내의 데이터 셋 (443개)을 활용하여 토지보상비에 영향을 주는 주요 결정 요인을 분석한다. 해당 분석을 위해 기존 토지 비용 관련 연구에서 활용된 주요 변수를 활용하였다. 이를 기반으로 8개 (토지면적, 개별 공시지가, 감정평가액, 지목, 용도지역 1, 지형 고저, 지형 형상, 도로 접면)의 주요 변수를 활용하였다. 더불어, 해당 변수는 기계학습 알고리즘 기반의 Xgboost 알고리즘을 통해 변수별 중요도 평가를 진행하였고, 해당 변수 중, 개별공시지가가 가장 중요도가 높은 변수로 확인하였다. 토지보상비 결정 요인에 대한 분석 및 검증을 위해 선형다중회귀분석을 사용하였다. 검증을 위해 구성되는 변수로 종속변수는 개별공시지가 변수를 활용하였고, 독립변수는 연속형 변수 1개 (면적), 범주형 변수는 5개 (지목, 용도지역1, 지형고저, 지형형상, 도로접면)를 활용하였다. 본 연구의 모델에 대한 검증결과, 지목, 용도지역 1, 도로접면에 대한 독립 변수가 유의미한 것으로 확인하였다.

• 한국전산구조공학회논문집
• /
• 제28권5호
• /
• pp.563-570
• /
• 2015

기존 구조물의 손상평가에 관한 연구는 지진 등과 같은 과도한 하중에 의한 손상을 고려하였다. 그러나 구조물은 과도한 하중없이도 장기간의 시간에 따라 염화물, 탄성화 등과 같은 이유로 노후화가 진행되어 구조성능이 저하될 수 있다. 그래서 구조물의 건전도를 효과적으로 관리하기 위해서는 노후화에 의한 구조성능 저하도 검토되어야 한다. 본 연구에서는 염화물에 의한 철근의 부식을 노후화 요인으로 고려한다. 철근부식에 의한 재료의 구조성능 저하를 고려하기 위해 부식정도에 따른 철근의 단면적, 항복강도, 파단변형률, 피복 콘크리트 강도 등을 예측한다. 이를 구조모델링에 적용하여 구조부재 및 구조물의 구조성능 저하를 분석한다. 구조부재의 구조성능을 분석하기 위해 모멘트-곡률 해석을 수행한다. 구조물 레벨의 구조성능을 고려하기 위해, 고유치해석을 통한 고유주기와 모드형상을 분석한다. 또한 비선형 정적해석을 통해 구조물의 강도와 변형성능을 분석한다.

• 한국환경과학회지
• /
• 제31권10호
• /
• pp.869-881
• /
• 2022

In this study, a field study was conducted to investigate the relationship between high-resolution remote images and the volumetric moisture, and the number of compaction. Changes in the shape of the surface and soil moisture content were observed and correlated with the number of compactions using roller equipment. As the compaction is repeated, the surface is flattened and the terrain curvature decreases and converges to zero. In particular, the tangential curvature changes as the number of compactions increase. Due to soil compaction, the vegetation index changed from a positive to a negative value, and most of the test site area was homogenized with a negative index. This suggests a decrease in porosity and an increase in volumetric water content associated with increasing soil compaction. Soil moisture, measured using a frequency domain reflectometry(FDR) sensor, tends to increase proportionately with the number of vibration compactions, but the correlation between the number of compactions and soil moisture is unclear. This study suggests that while it is necessary to consider the reproducibility of the experiments performed, the compaction quality of the soil can be evaluated using high-resolution terrain factors and soil moisture.

• 보존과학연구
• /
• 통권31호
• /
• pp.103-120
• /
• 2010

Most of the important stone cultural heritage (National treasures and Treasures) in Korea are mainly located outdoor and considerably affected by the changes of the temperature, humidity and rainfalls. 541 of the stone cultural heritage are preserved as National treasure and Treasure. The pagodas occupy 187 remains and next 127 Buddha statues, 68 monuments, 60 stupas, and the others 74 stone cultural heritages. The shelter has been installed for one pagoda, 60 Buddha statues, 36 monuments and two stupas. The shelters are categorized in three shapes as traditional shape, modern shape, and others (tradition+modern). Approximately 100 of shelters that have constructed in traditional ways, and about nine of shelters have modern ways, and the only one has the combination shape of tradition and modern, which has been constructed since mid 1900s and repaired from the 1980s~2000s. Many researchers are studying for improvement of manners such as repairing, remodeling or removing of the shelter because problems have occured on shelters. Architectural form of traditional style of Korean timber building is respected, but it has problems on importing natural sunlight to the inside as well as ventilation and spacial problems. However, it needs to supplement policies to improve the positive roles of shelters such as prevention of artificial damage, blocking acid rain, and so on. For instance, the rock-carved Buddha Triad in Seosan, it had problems with viewing, contamination, and dew condensation on the surface. These problems decreased after dismantling the shelter, the space was made for improvement of viewing and dew condensation, and moisture problems were in better conditions. The velocity wind is an important factor in drying conditions on the surface of the rock, therefore the condition has improved after dismantling the shelter.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.35-40
• /
• 2013

In this paper, we propose the Tangible Virtual Reality Representation Method to using haptic device and feature to morphology of created bead from Flux Cored Arc Welding. The virtual reality was started to rising for reduce to consumable materials and welding training risk. And, we will expected maximize virtual reality from virtual welding training. In this paper proposed method is get the database to changing the input factor such as work angle, travelling angle, speed, CTWD. And, it is visualization to bead from extract to optimal morphological feature information to using the Neural Network algorithm. The database was building without error to extract data from automatic robot welder. Also, the Neural Network algorithm was set a dataset of the highest accuracy from verification process in many times. The bead was created in virtual reality from extract to morphological feature information. We were implementation to final shape of bead and overlapped in process by time to using bead generation algorithm and calibration algorithm for generate to same bead shape to real database in process of generating bead. The best advantage of virtual welding training, it can be get the many data to training evaluation. In this paper, we were representation bead to similar shape from generated bead to Flux Cored Arc Welding. Therefore, we were reduce the gap to virtual welding training and real welding training. In addition, we were confirmed be able to maximize the performance of education from more effective evaluation system.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.113-121
• /
• 2018

U-flanged truss beam is composed of u-shaped upper steel flange, lower steel plate of 8mm or more thickness, and connecting lattice bars. Upper flange and lower plate are connected by the diagonal lattice bars welded on the upper and lower sides. In this study the structural experiments on the U-flanged truss beams with various shapes of upper flange were performed, and the flexural and shear capacities of U-flanged truss beam in the construction stage were evaluated. The principal test parameters were the shape of upper flange and the alignment space of diagonal lattice bars. In all the test specimens, the peak loads were determined by the buckling of lattice bar regardless of the upper flange shape. The test results have shown that the buckling of lattice bar is very important design factor and there is no need to reinforce the basic u-shaped upper flange. However, the early lattice buckling occurred in the truss beam with upper steel bars because of the insufficient strength and stiffness of upper chord, and the reinforcement in the upper chord is necessary. The formulae of Eurocode 3 (2005) have presented more exact evaluations of lattice buckling load than those of KBC 2016.

• 한국건축시공학회지
• /
• 제19권3호
• /
• pp.201-207
• /
• 2019

본 연구에서는 변형속도에 따른 비정질 강섬유보강 시멘트복합체의 직접인장특성에 대하여 평가하였다. 길이 15, 30mm의 박판형 비정질 강섬유를 각각 1.0, 1.5, 2.0% 혼입한 섬유보강 시멘트복합체를 제작하였으며, 변형속도 $10^{-6}/s$(정적), $10^1/s$(동적)의 조건에서 직접인장시험을 수행하였다. 그 결과, 길이 15mm의 비정질 강섬유는 섬유의 섬유의 길이가 짧고 혼입개체수가 많기 때문에 섬유가 매트릭스로부터 인발되었다. 반면, 길이 30mm의 비정질 강섬유는 섬유의 표면이 거칠고 비표면적이 크기 때문에 매트릭스와의 부착성능이 우수하지만, 박판형의 섬유 형상이 전단력에 약하기 때문에 섬유가 인발되지 않고 파단 되었다. 섬유의 길이가 길수록 인장강도, 변형능력 및 인성이 큰 것으로 나타났다. 반면, 길이 30mm의 비정질 강섬유는 매트릭스로부터 인발되지 않고 파단 되지만 길이 15mm의 비정질 강섬유는 매트릭스로부터 인발되기 때문에 변형속도의 영향을 받는 섬유-매트릭스 계면의 부착효율이 크게 되어, 인장강도, 변형능력 및 인성에 대한 동적증가계수가 큰 것으로 나타났다.