• Land and Housing Review
• /
• v.14 no.3
• /
• pp.93-106
• /
• 2023

This study attempted to simulate changes in the thermal environment according to the type of apartment complex in Korea using CFD techniques and evaluate the thermal environment by type of apartment. First, apartment complex types in the 2000s and 2010s were referred from previous studies and four types of apartment complex were extracted from. Second, the layout of the apartment complex and temperature changes were analyzed by the direction of wind inflow. Third, a standardized model was created from each type using tower type, plate type, and mixed driving. Last, CFD simulations were performed by setting up the inflow of wind from a total of eight directions. The temperature was relatively low in the type consisting of only the tower type and the type of placing the tower type in the center of the complex, regardless of the direction of the wind. It was due to the good inflow of wind from these types to the inside of the complex. It can be interpreted because wind flows easily into the complex in these types. The findings showed that wind flow and resulting temperature distribution patterns differed depending on the building type and complex layout type, confirming the need for careful consideration of the complex layout in the early design stage. The results are expected to be used as basic data for creating a sustainable residential environment in the early design stage of apartment complexes in the future.

• Land and Housing Review
• /
• v.14 no.3
• /
• pp.145-155
• /
• 2023

Recently, with the widespread adoption of Building Information Modeling (BIM) technology in the construction industry, various object detection algorithms have been used to verify errors between 3D models and actual construction elements. Since the characteristics of objects vary depending on the type of construction facility, such as buildings, bridges, and tunnels, appropriate methods for object detection technology need to be employed. Additionally, for object detection, initial object images are required, and to obtain these, various methods, such as drones and smartphones, can be used for image acquisition. The study uses a 360° camera optimized for internal tunnel imaging to capture initial images of the tunnel structures of railway and road facilities. Various object detection methodologies including the YOLO, SSD, and R-CNN algorithms are applied to detect actual objects from the captured images. And the Faster R-CNN algorithm had a higher recognition rate and mAP value than the SSD and YOLO v5 algorithms, and the difference between the minimum and maximum values of the recognition rates was small, showing equal detection ability. Considering the increasing adoption of BIM in current railway and road construction projects, this research highlights the potential utilization of 360° cameras and object detection methodologies for tunnel facility sections, aiming to expand their application in maintenance.

• Journal of Korean Elementary Science Education
• /
• v.42 no.3
• /
• pp.399-408
• /
• 2023

This study developed and applied a maker education program for an elementary school's science unit on 'Animal Life'. It examined the program's impact on students' academic achievement and creative problem-solving ability. The theme of the maker education program was 'creating a robot virtual reality (VR) exhibition hall mimicking animal characteristics'. It explored scientific concepts and creatively created a robot VR exhibition hall in accordance with the TMI maker education model. Findings revealed that the program significantly improved students' academic achievement and creative problem-solving ability (p<.05). This study provides evidence for the effectiveness of maker education in elementary school science classes and suggests that using maker education can increase students' interest in and engagement with science learning. To implement maker education more actively in elementary school science classes, stakeholders should develop various topics and programs. Additional research investigating the effectiveness of maker education in different age groups and various other areas of elementary science education is required to generalize the results of this study. Moreover, educational and teacher capacity building is required for educators to utilize maker education effectively.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.101-110
• /
• 2019

The actor's art work is to build and create a role on stage based on the writer's drama. The actor's role creation is possible by analyzing the role of the writer in the drama logically and acting it actively. This is how an actor who practices practical acts goes beyond a stereotypical role-building and performs live acting skills. A case study in the field work for the application of Etude is absolutely necessary at present, where Etude of Stanislavsky is operated in Korean university education and field. This study will be a case in which Etude, which is a scientific and systematic acting methodology of Stanislavsky, is recognized and applied in the field as a methodology for more extended actor training methodology rather than making a judgment about the value of Etude as applied to theater education and the field as an acting training method. The researcher will introduce the methodology of using Etude as an acting method of Stanislavsky through the use of Etude in the creative play , and would like to give an example of an acting creation process model about 'how to apply Etude'. Through these studies and applications, actors can avoid falling into stereotypes and mannerism, and prepare the foundations for a living actor's art, the acting guide for creating a practical role.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.6
• /
• pp.84-95
• /
• 2022

The landscaping of Amore-Pacific's new building has received various awards since its construction. This study attempted to identify the mechanisms of planning, design, and construction of this project through the ground theory. The results of the study are summarized as follows. The client's place attachment of the sites, which was the company's parent, was the driving force for an international design competiton in which architecture and landscaping were integrated. After that, in the detailed design stage for the actual implementation of the contest-winning plan, competent local designers and contractors were selected, and a consultative body was operated to engage in various opinions and promote rational decision-making. As for consultative body's operation method, simulation, physical model production, and detailed drawings were created after sharing opinions, and landscape design supervision played a major role. Establishing consistency in design and construction through integrated planning and landscape design supervision is required to cultivate craftsmanship and foster landscape coordinators in today's industrialized practice. The accumulation of related follow-up studies and supplementation of the system is anticipated.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.9
• /
• pp.61-68
• /
• 2006

Recently the large scale civil engineering projects are being implemented by reclaiming the sea or utilizing seashore and river embankment areas. The reclaimed land and utilized seashore are mostly soft ground that doesn't have sufficient bearing capacity. This soft ground consists of fine-grained soil such as clayey and silty soils or large void soil like peat or loose sand. It has high ground water table and it may cause the failure and crock of building foundation by uplift pressure and ground water leakage. In this study, the permittivity and the transmissivity were evaluated with the applied normal pressure in the laboratory. The laboratory model tests were conducted by utilizing geocomposite drainage system for draining the water out to release the uplift pressure. The soil used in the laboratory drainage test was dredged soil from the reclaimed land where uplift pressure problems can arise in soil condition. Geocomposite drainage system was installed at the bottom of apparatus and dredged soil was layered with compaction. Subsequently the water pressure was supplied from the top of specimen and the quantities of drainage and the pore water pressure were measured at each step water pressure. The results of laboratory measurements were compared with theoretical values. For the evaluation of propriety of laboratory drainage test, 2-D finite elements analysis that can analyze the distribution and the transferring of pore water pressure was conducted and compared with laboratory test results.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.35-42
• /
• 2022

The N-value from the Standard Penetration Test (SPT), which is one of the representative in-situ test, is an important index that provides basic geological information and the depth of the bearing layer for the design of geotechnical structures. In the aspect of time and cost-effectiveness, there is a need to carry out a representative sampling test. However, the various variability and uncertainty are existing in the soil layer, so it is difficult to grasp the characteristics of the entire field from the limited test results. Thus the spatial interpolation techniques such as Kriging and IDW (inverse distance weighted) have been used for predicting unknown point from existing data. Recently, in order to increase the accuracy of interpolation results, studies that combine the geotechnics and deep learning method have been conducted. In this study, based on the SPT results of about 22,000 holes of ground survey, a comparative study was conducted to predict the depth of the bearing layer using deep learning methods and IDW. The average error among the prediction results of the bearing layer of each analysis model was 3.01 m for IDW, 3.22 m and 2.46 m for fully connected network and PointNet, respectively. The standard deviation was 3.99 for IDW, 3.95 and 3.54 for fully connected network and PointNet. As a result, the point net deep learing algorithm showed improved results compared to IDW and other deep learning method.

• Journal of Intelligence and Information Systems
• /
• v.29 no.2
• /
• pp.219-240
• /
• 2023

Conversational AI which allows users to interact with satisfaction is a long-standing research topic. To develop conversational AI, it is necessary to build training data that reflects real conversations between people, but current Korean datasets are not in question-answer format or use honorifics, making it difficult for users to feel closeness. In this paper, we propose a conversation dataset (KOMUChat) consisting of 30,767 question-answer sentence pairs collected from online communities. The question-answer pairs were collected from post titles and first comments of love and relationship counsel boards used by men and women. In addition, we removed abuse records through automatic and manual cleansing to build high quality dataset. To verify the validity of KOMUChat, we compared and analyzed the result of generative language model learning KOMUChat and benchmark dataset. The results showed that our dataset outperformed the benchmark dataset in terms of answer appropriateness, user satisfaction, and fulfillment of conversational AI goals. The dataset is the largest open-source single turn text data presented so far and it has the significance of building a more friendly Korean dataset by reflecting the text styles of the online community.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.185-192
• /
• 2023

In this study, fluctuating wind velocity for time history analysis is simulated by a single variate, single-dimensional random process using the KBC2022 spectrum about across-wind direction. This study analyzed and obtained the inelastic dynamic response for structures modeled as a single-degree-of-freedom system. It is assumed that the wind response is excellent in the primary mode, the change in vibration owing to plasticization is minor, along-wind vibration and across-wind vibration are independent, and the effect of torsional vibration is small. The numerical results, obtained by the Newmark-𝛽 method, shows the time-history responses and trends of maximum displacements. As a result of analyzing the inelastic dynamic response of the structure with the second stiffness ratio(𝛼) and yield displacement ratio (𝛽) as variables, it is identified that as the yield displacement ratio (𝛽) increases when the second stiffness ratio is constant, the maximum displacement ratio decreases, then reaches a minimum value, and then increases. When the stiffness ratio is greater than 0.5, there is a yield point ratio at which the maximum displacement ratio is less than 1, indicating that the maximum deformation is reduced compared to the elastically designed building even if the inelastic behavior is permitted in the inelastic wind design.

• The Korean Journal of Franchise Management
• /
• v.8 no.3
• /
• pp.17-27
• /
• 2017

Purpose - In align with the increasing competition in both online and offline franchise markets caused by the increasing impact of social networking service, entrepreneurial passion(EP) of the franchise owners has crucial impact on the stakeholders. This study proposed the customer among stakeholders has the critical influence firm's success and examined the structural relationship between entrepreneurial passion(EP) and trust, identification, and loyalty from the customer's perspective. Research design, data, and methodology - This study examines the structural relationship between entrepreneurial passion(EP), trust, identification, and loyalty from the customer's perspective. More specifically, the EP were measured using three sub-dimensions such as EP-inventing(Perceived passion for inventing), EP-founding(Perceived passion for foundting), and EP-developing(Perceived passion for developing). In order to verify the research purposes, research model and hypotheses were developed. All constructs were measured with multiple items developed and tested in the previous studies. Each item was measured on a 7 point Likert-scale anchored by '1 = strongly disagree, 7 = strongly agree'. The data were collected from 449 franchise consumers through online survey and were analyzed using SPSS 21.0 and Smart PLS 3.0. statistical program. Result - The results of this study are as follows. First, EP-inventing and EP-developing have significant impacts on corporate trust. Second, EP-founding does not have significant impact on corporate trust. Third, EP-inventing and EP-founding have significant impacts on consumer identification. Fourth, EP-developing does not have impact on identification directly, but does indirectly through corporate trust as a mediator. Fifth, corporate trust and identification have significant impacts on loyalty. Conclusions - This indicates that the foodservice franchise CEOs should continuously develop new menus and service to fulfill customer needs. EP-inventing of the food franchise CEOs may enhance customer trust for higher quality of product or service, and EP-developing can also be a driving force for customer trust as it embeds belief in customers that the franchise is sustainably developing. Also, food franchise CEOs should first clarify the support process for the existing brands before developing new ones. Customers tend to lead the trend by using brands that satisfy new trends in the foodservice franchise market, and it could have identification with the trend-setting franchise. Customers do not accept if a company is different from their personal image or norms. So the franchise CEOs must create identification with customers by building corporate trust. Corporate trust influences consumer behavior and emotion, thus the franchises need to secure trust by improving product or service continuously.