• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.95-104
• /
• 2015

Recently, collecting and analyzing method of users location has been studied due to the development of mobile devices. There is analyzing method using Semantic Location History in order to identify of characteristics and extract pattern and predict trajectory of users. We should extraction of Stay Point in order to use Semantic Location History. The Conventional extraction method of Stay Point is not accuracy of location of Stay Points because it does not specify the GPS log of users. Also, Conventional extraction method of Stay Point cannot distinguish indoors and outdoors. In this paper, we implement extraction method of Stay Point in which specify the GPS log of users and extraction of Stay Point at indoors only. Stay Point(nearSP) specifies the nearest GPS log of users from generated Stay Point by conventional extraction method. And, Stay Point(indoorSP) specifies the GPS log of users that user get into the building. Our experimental results, accuracy of Stay Point is improved, and capacity of output data decrease than Conventional extraction method. Also, we were able to distinguish Stay Point of indoors and outdoors.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.11
• /
• pp.15-21
• /
• 2021

Losses of both life and property increased from damage to underground pipe such as heat transmission pipe buried underground in downtown because pipes are gradually aging. Considering the characteristics of the heat transmission pipe, which is not exposed to the outside and difficult to immediately identify problems such as damage, it is realistic to indirectly check the condition of the facility based on the historical information that is periodically collected through facility maintenance. In this study, a methodology for estimating the damage probability was developed by examining the history information of the heat transmission pipe, deriving an evaluation factor that is related to the damage probability. The contribution factor of the damage probability were reviewed by analyzing not only the guidelines for maintenance of heat transmission pipe of advanced European countries and domestic district heating companies, but also the cases of waterworks with similar characteristics. Evaluation factors were selected by considering not only the correlation with the damage probability but also the possibility of securing data. Based on 1999, when the construction technology and standards of heat transmission pipe changed, the damage probability estimation function according to the period of use was divided into the case of being buried before 1998 and the case of being buried after 1999, and presented. In addition, the damage probability was corrected by assigning weights according to the measured data for each evaluation factor such as the diameter, use, and management authority.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.6
• /
• pp.381-389
• /
• 2023

One of the crucial components in building information modeling (BIM) is data. To systematically manage these data, various research studies have focused on the creation of object breakdown structures and property sets. Specifically, crucial data for managing programs and payments involves work breakdown structures (WBSs) and cost breakdown structures (CBSs), which are indispensable for mapping BIM objects. Achieving this requires disassembling CBS quantities based on 3D objects and WBS. However, this task is highly tedious owing to the large volume of CBS and divergent coding practices employed by different organizations. Manual processes, such as those based on Excel, become nearly impossible for such extensive tasks. In response to the challenge of computing quantities that are difficult to derive from BIM objects, this study presents methods for disassembling length-based quantities, incorporating significant portions of the bill of quantities (BOQs). The proposed approach recommends suitable CBS by leveraging the accumulated history of WBS-CBS mapping databases. Additionally, it establishes a unified CBS code, facilitating the effective operation of CBS databases.

• Journal of the Korean Society for information Management
• /
• v.26 no.3
• /
• pp.213-237
• /
• 2009

Local culture is a cultural heritage that has come down from generation to generation in the natural environment of a region. It includes history, tradition, natural features, art, and historic relics. The Academy of Korean Studies has complied "The Encyclopedia of Korean Local Culture" using those local culture contents. Local culture content shave the features of documentary, such as authenticating the source, and managing hierarchy structure. Thus, to deal with local culture contents, a "circular knowledge information management system" is sought for that helps basic, fragmentary, and high-level information to circulate to create new knowledge information within the system. A user of this circular knowledge information management system is able not only to collect data directly in it, but also to fetch data from other database. Besides, processing the collected data helps to create new knowledge information. But, it's very difficult to sustain the features of the original hierarchy bearing meaning contained in the various kinds of local culture contents when building a new database. Moreover, this kind of work needs many times of correction over a long period of time. Therefore, a system in which compilation, correction, and service can be done simultaneously is needed. Therefore, in this study, focusing on the case of "The Encyclopedia of Korean Local Culture", I propose a XML-based digital compilation management system that can express hierarchy information and sustain the semantic features of the local culture contents containing lots of ancient documents, and introduce the expanded functions developed to manage contents in the system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.75-91
• /
• 2015

This study aims to analyse the U-City characteristics through the U-City historical mapping. The U-City characteristics were analysed by building the U-City historical map in terms of STIM model which consists of service, technology, infrastructure and management. The data for analysis is the National Informatization White Paper published by the NIA (National Information Society Agency) from 2002 to 2013. As a result, first, the U-City service were evolved from administration informatization, enterprise informatization, administration/living informatization and administration/space/private informatization through the intelligence facilities and space. Second, the U-City technology were changed through wire network, sensor/network, processing/super-highway network, convergence of network/security. Third, the U-City infrastructure have had evolutionary process such as wire computer network, wire/wireless network, intellectualization facility and intelligent facility space. Forth, the U-City management were carried out with making the unit network/infrastructure management, information connection/operating management and information integration/participation management. Therefore, the history of U-City has been making rapid development in government computerization, computer oriented society, information city and ubiquitous city.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.271-277
• /
• 2020

There are increasing cases of monitoring the structural response of structures using multiple sensors. However, owing to cost and management problems, limited sensors are installed in the structure. Thus, few structural responses are collected, which hinders analyzing the behavior of the structure. Therefore, a technique to predict responses at a location where sensors are not installed to a reliable level using limited sensors is necessary. In this study, a numerical study is conducted to predict the seismic response of low-rise buildings using limited information. It is assumed that the available response information is only the acceleration responses of the first and top floors. Using both information, the first natural frequency of the structure can be obtained. The acceleration information on the first floor is used as the ground motion information. To minimize the error on the acceleration history response of the top floor and the first natural frequency error of the target structure, the method for predicting the mass and stiffness information of a structure using the genetic algorithm is presented. However, the constraints are not considered. To determine the range of design variables that mean the search space, the parameter prediction method based on artificial neural networks is proposed. To verify the proposed method, a five-story structure is used as an example.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.299-302
• /
• 2014

Due to the convergence between digital devices and the development of wireless communication technology, bit-signal sensor miniaturization, building an Electronic Medical Record (EMR) which is a digital version of a paper chart that contains all of a patient's medical history and the information of Electronic Health Record (EHR), Ubiquitous healthcare (u-Healthcare) that can monitor their health status and provide personal healthcare service anytime and anywhere. Also, the appearance of cloud computing technology is one of the factors that accelerate the development of u-healthcare service. However, if the individual information to be used maliciously during the u-healthcare service utilization, leads to serious problems directly related to the individual's life because if it goes beyond the level of simple health screening and treatment, it may not provide accurate and reliable healthcare services. For this reason, we analyzed a variety of security issues related to u-healthcare service in cloud computing environment and described about directions of secure health information sharing system construction. In addition, we suggest the future developmental direction for th activation of u-healthcare industry.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.7-18
• /
• 2002

To activate public transportation service, Bucheon City built Bus Information System based on Beacon type, and operates it for no.22 line. This research analyzes an effect of BIS operations, and mainly it analyzes far reliability evaluation of bus arrival time information and passenger satisfaction about BIS. As results of reliability evaluation of arrival time information service, it is proven to be practically inappropriate to use as arrival time data because it is not only travel time between each bus stop but also previous travel time history data. In order to improve this matter, neural network model was evaluated as the most outstanding one as result of experiment in applying current arrival time Prediction model. This research cannot help limiting for evaluation of operation effect in Bucheon City because there is no Bus Information System based on GPS type in Korea. For the future ITS model city, in the case of building ITS model city based on GPS type, it is possible to compare two systems relatively. In addition to that, fur the consideration of reliability of bus arrival time information, it is required to develop Predictable model and research factors that affect to bus operation.

• Journal of architectural history
• /
• v.15 no.1 s.45
• /
• pp.29-40
• /
• 2006

This paper is focused on Damheonseo(湛軒書), an anthology written by Hong Daeyong, and I deal with Chinese Architectural views which he had experienced in his itinerary to Beijing, and the vivid pictures of Joseonkwan (called the Koryo or Joseon Embassy) located in Beijing at that time. He was a scholar of great erudition over astronomy, mathematics, military science, politics, and so on. He was interested in practical sciences at early time, and criticized secular scholars full of vanity who had presented purposeless articles. In his age of 35, Qianlong(乾隆) 30 (1764, Youngjo 41), he, a military escort, accompanied by Hong Uk, Joseon envoy and his uncle. Before his itinerary, he self-studied Chinese. Also, during a long journey he got new experiences and information around each area, deviating his group whenever he had some times. He could get more variant experiences than others because of his character full of curiosity, and his observations from the vivid lives of the time helped us get various views between Chinese and Korean architecture. Likewise, although he denounced Qing(淸) scathingly as a barbarian, he mentioned several points about the characteristics of Chinese architecture at that time. First of all, totally Chinese architecture had strong rational and practical points. Secondly, based on bountiful products, buildings along streets shown in Chinese city had sophisticated compositions, and luxurious and magnificent appearances. Thirdly, using the brick from walls to houses was so universal. Fourthly, the layouts of building with three- or four-closed courtyard had very orderly shapes, and the structure of street was also so arranged. Finally, because of stand-up lives, the scales and appearances of interior space were even more extended, and storages were less developed than those of Joseon. As another points, I found that Joseonkwan was moved next to Shushangguan(庶常館)from Huidongnanguan(會同南館) around Hanlimyuan(翰林院), and had been remodeled into a house with Korean custom in using the inner spaces, although it was followed by a closed courtyard style. Likewise, I recognized that Ondols were sure to be established in all temporary houses during the journey to Qing, and felt their strong traditional residential custom in such mentions. Now that the past pictures have disappeared and ways of life and our values have been largely changed, this study has very important meaning in comparing the ancient Chinese and Korean architecture.

• The Korean Journal of Archival Studies
• /
• no.71
• /
• pp.49-89
• /
• 2022

This study suggests the necessity and domestic application plan a national authority database that promotes an integrated access, richer search, and understanding of historical information sources and archival resources distributed among cultural heritage institutions through the "Social Networks and Archive Context" project case. As the SNAC project was transformed into an international cooperative organization led by NARA, it was possible to secure a sustainable operating system and realize cooperative authority control. In addition, SNAC authority records have the characteristics of providing richer contextual information about life and history and social and intellectual network information compared to libraries. Through case analysis, First, like SNAC, a cooperative body led by the National Archives and having joint ownership of the National Library of Korea should lead the development and expand the scope of participating institutions. Second, in the cooperative method, take a structure in which divisions are made for each field with special strengths, but the main decision-making is made through the administrative team in which the two organizations participate. Third, development of scalable open source software that can collect technical information in various formats when constructing authority data, designing with the structure and elements of archival authority records, designing functions to control the quality of authority records, and building user-friendly interfaces and the need for a platform design reflecting content elements.