• 한국컴퓨터정보학회논문지
• /
• 제18권3호
• /
• pp.97-105
• /
• 2013

재난으로 인해 초토화 상황이 발생하면 전기 단절로 기지국을 이용하는 통신 수단이 두절된다. 공공 안전 및 재난 구조 전파 통신 표준 관련 시스템을 사용하기 위해서 사용자는 전용 장비를 사용해야 하고, 운영을 위한 전문 지식이 필요하다. 또한, 인프라를 구축하기 위한 막대한 투자비용이 드는 단점을 가지고 있다. 이는 재난 상황에서 신속하고 효율적인 재난 통신으로는 부족하며, 국가 자원이 투입되긴 전 국민들에게 큰 혼란이 발생할 수 있다. 이 문제를 해결하기 위해 본 논문에서는 일반인도 바로 사용할 수 있는 모바일 응용의 설계를 제안하고, 개념 증명을 위해 이를 안드로이드 폰 응용으로 구현한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.925-930
• /
• 2008

As office automation appliances and communication equipments are adopted in office buildings, internal heat gains increase gradually. When making simulation model, internal heat gains are usually set up with standard values or ignored. Therefore, the impact of the internal heat gains has been ignored or not been focused although it is recognised as significant contributor to heating/cooling load of buildings. This study focused on the impact of internal heat gains on curtain wall buildings. the amount and schedules of heat internal gains profiles not only affect the profiles of heating/cooling loads, but also make impact on reducing the effectiveness of high performance glazing systems. It is important to identify internal heat gains profiles before considering the installation of high performance glazing systems.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.11-18
• /
• 1999

Recently advanced countries are now beginning to use ACM (Advanced Composites Material), which is mostly used in the industry of airplane, ship building and sports equipments, in the construction industry. Compared with existing construction materials, ACM possesses many advantages such as light-weight, high-strength, corrosion resistant property. Among other manufacturing process of ACM, pultrusion is one of the promising one of civil engineering application. In this paper, the structural characteristics of pultruded GFRP strip were studied. Major parameters to influence structural behavior of pultruded GFRP are considered to be fiber volume fraction, die temperature, pulling speed and fiber orientations. The effect of these parameters are studied by experimently and analytically. From this study, it is concluded that fiber volume fraction and fiber orientations influence more on the mechanical property of pultruded GFRP. In addition to above parametric study, off-axis tests were carried out and the results are compared with failure theories. It showed that they agree well each other. Since this study is carried out in limited scope, further research on the reinforcement in the transverse direction, experiment on the compressive strength and research on the durability should be conducted for wide application of pultruded GFRP sections.

• 제어로봇시스템학회논문지
• /
• 제6권9호
• /
• pp.831-835
• /
• 2000

The uniformity of themperature on a wafer is a wafer is one the most important parameters to conterol the RTF(Rapid Thermal Process) with proper input signals. It is impossible to achieve the uniformity of temperature without the exact estimation of temperature ar all points on the wafer. There fore, it is difficult to understand the internal dynamics as well as the structural complexities of the RTP, which is aprimary obstacle to measure the distributed temperatures on the wafer accurately. Furthermore, it is also hard to accomplish desirable estimation because only a few pyrometers are available in the general equipments. In the paper, a thermal model based on the chamber grometry of the AST SHS200 RTP system is developed to effectively control the thermal uniformity on the wafer. First of all, the estimation method of one-point measurement is developed, which is properly extended to the case of multi-point measurements. This thermal model is validated through simulation and experiments. The proposed work can be utilized to building a run-by -run or a real-time control of the RTP.

• 한국실내디자인학회논문집
• /
• 제26권6호
• /
• pp.172-179
• /
• 2017

The regional trauma center should be a trauma treatment center equipped with facilities, equipments, and manpower capable of providing optimal treatment from emergency surgery to a severely traumatized patient upon arrival at the hospital. In order to establish a medical system for effective severe diseases, it is necessary to prepare architectural planning guidelines for the regional trauma centers. This study analyzes the connectivity, control, integration, and mean depth of current trauma centers using the convex map of space syntax, And to provide basic data for building for more efficient regional trauma center. The major areas that must be included in the regional trauma center are trauma resuscitation room, trauma operating room, trauma intensive care unit, and trauma general ward. It is necessary to carry out the architectural planning to increase the interconnection of the four areas. Also, the elevator plan for trauma patients should be emphasized. In addition, a regional trauma center should be separated from the existing facility for independent operation. According to the case analysis of the space configuration of the regional trauma center, the location of the operating room is most important considering the connection with each department of the hospital and the treatment flow of the severe trauma patients.

• 한국공간구조학회논문집
• /
• 제13권2호
• /
• pp.37-45
• /
• 2013

Reduction of microvibration is regarded as important in high-technology facilities with high precision equipments. In this paper, smart control technology is used to improve the microvibration control performance. Mr damper is used to make a smart base isolation system amd fuzzy logic control algorithm is employed to appropriately control the MR damper. In order to develop optimal fuzzy control algorithm, a multi-objective genetic algorithm is used in this study. As an excitation, a train-induced ground acceleration is used for time history analysis and three-story example building structure is employed. Microvibration control performance of passive and smart base isolation systems have been investigated in this study. Numerical simulation results show that the multi-objective genetic algorithm can provide optimal fuzzy logic controllers for smart base isolation system and the smart control system can effectively reduce microvibration of a high-technology facility subjected to train-induced excitation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.786-790
• /
• 2006

Urban rail transit offers target performance and function because various lower part system such as rolling-stock, signal, power and trackis consisted as complex. In order to function properly an urban rail transit which is complicated system to work as safety and reliability, System must secure safety with structure, design, manufacture, install and verification and it is important to establish a safety standard follows it procedures, establish what step all it is important to operate. Safety standard of urban transit infrastructure is minimum standard necessary to secure safety of signal, power and track. Urban rail transit standard business leads to make many requirements. Recently, many types of equipment have applied to manage requirements and standards for system efficiently in part of universal, airline and car accordingly applied equipments use to manage a pursuit(Trace) between standard of system. Especially importance of management is emphasized more become more. Importance of standard management which usesa computing support tool recently in transit filed is embossed and is predicted to be more such forward. Therefore we propose the effective method of management with infrastructure system by constructed data-base system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.791-795
• /
• 2006

Urban transit is one of the most effective ways for efficient operation and construction of an urban transit by composition system which is liked originally such as rolling-stock, power, signal and infrastructure. Urban rail transit system is running in domestic, imports major equipments from advanced countries and setup for maintenance. But it takes long time because it does each organizations and lines. Also, signal, power and track system apply different standard by each construction organizations it causes an increasing construction of cost accordingly it desperately needs a systematic countermeasure. Therefore standard specification of urban transit have been establishing and operatingfor efficient operation of urban transit and base technology security that is populace ride to become a base of state economy. After track, power and signal system will be announced. Standard specification become more, the importance of administrationof standards is emphasized more. Specification administrator’s the importance which use a computing support tool recently in railroad part in embossed and is predicted to be more such forward. Therefore we propose the effective method of management with track, power signal system by constructed data-base system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권2호
• /
• pp.62-67
• /
• 2000

The uniformity of temperature on a wafer is one of the most important parameters to control the RTP (Rapid Thermal Process) with proper input signals. Since it is impossible to achieve the uniformity of temperature without exact estimation of temperature at all points on the wafer, the difficulty of understanding internal dynamics and structural complexities of the RTP is a primary obstacle to accurately measure the distributed temperatures on the wafer. Furthermore, it is also hard to accomplish desirable estimation because only few pyrometers have been commonly available in the general equipments. In the paper, a thermal model based on the chamber geometry of the AST SHS200 RTP system is developed to effectively control the thermal uniformity on the wafer. First of all, the estimation method of one-point measurement is developed, which is properly extended to the case of multi-point measurements. This thermal model is validated through certain simulation and experiments. The work can be usefully contributed to building a run-by-run or a real-time controls of the RTP.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.31-44
• /
• 2003

Domestic industry calamity rate did decrease in large numbers by many efforts of the safety and health organizations. But that is low yet among the OECD countries. Calamities are started In most work inexperience and safety consciousness absence. So, we can know that education is how important. Domestic small and medium enterprises are in trend that industrial accident is increased by deterioration of hardware, not enough preparedness of safety equipments. But, the safety and health education had not been utilized so far effectively and applied systematically. Therefore, the most important among many means to reduce calamity is the safety and health education. An efficient education will supply suitable knowledge and technology to work people. And that will lead to prevent accident by building right habit and attitude. This research did the survey about problems of education that is enforced in small and medium enterprises. That survey is done to three groups of workers, administrators and managers. We compared domestic safety and health education system and advanced foreign system. And, analyzed problems and presented a solution. Finally, this research presented efficient operation model of the safety and health education suitable to domestic medium and small enterprises.