• Archives of design research
• /
• v.20 no.1 s.69
• /
• pp.253-262
• /
• 2007

The postpartum care center is a facility which made its debut only about 10 years ago but has now changed the nation's postpartum care culture. Women delivered of a child use the postpartum care center at this time since the low rate of childbirth has become a social phenomenon. However, while the postpartum care center is not supported legally and systematically, anybody can run it after they only file a report on businessman status with the tax office. So there are disordered wave of postpartum care startups which do not have basic facilities. Thus, this study is intended to suggest an interior environment plan considering an efficient space and users' benefits of a postpartum care center which has a characteristic difference from that of ordinary facilities in terms of targeted persons or operations but for which standards are not clear in terms of the Health and Welfare Law and the Medical Service Law. This study was conducted by investigating the actual condition of the entrance space, living space, common-use space, nursing space, administration and attached space in the six postpartum care centers selected from Seoul and Kyeonggi-do region and suggesting the direction of improvements, thus establishing the direction of interior designs and an interior environment plan. Hopefully, this study would be used as basic data on interior building plans, thus being helpful in enhancing the satisfaction of the postpartum care center user and operating the facility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.611-618
• /
• 2020

The reliability of the results of LCC analysis is determined by accurate analytical procedures and energy data from which the uncertainty is removed. Until now, systems that can automatically measure these energy data and produce databases have not been commercialized. Therefore this paper proposes a concept model of an S-LCC platform that can automatically collect and analyze electric energy consumption data of equipment systems using the IOT, which is the core tool in the Fourth Industrial Revolution and operates the equipment system efficiently using the analyzed results. The proposed concept model was developed by the convergence of existing BLCS and IOT and was comprised of five modules: Facility Control Module, LCC Analysis Module, Energy Consumption Control Module, Efficiency Analysis Module, and Maintenance Standard Reestablishment Module. Using the results of LCC analysis deduced from this system, the deterioration condition of an equipment system can be identified in real-time. The results can be used as the baseline data to re-establish standards for the maintenance factor, replacement frequency, and lifetime of existing equipment, and establish new maintenance standards for new equipment. If the S-LCC platform is established, it would increase the reliability of LCC analysis, reduce the labor force for entering data and improve accuracy, and would also change disregarded data into big data with high potential.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.6
• /
• pp.569-579
• /
• 2016

In order to ensure the stability of tunnel portal slope, reinforcement method such as anchors, soil nails and rock bolts have been used in Korea. When selecting slope reinforcement methods in tunnel portal area such as reinforcement arrangement and length, trial and error method can be very time-consuming and it was also not easy to verify the selection of an optimum condition. In this study, using the FISH language embedded in the finite difference code FLAC3D program, the optimization technique was developed with the Differential Evolution Algorithm (DEA). After building a database on the soil nailing method in tunnel portal area, this system can be selected to an optimum arrangement plan based on the factor of safety through the FLAC3D analysis. Through the results of numerical analysis, it was confirmed that the number of analysis was decreased by about 8 times when DEA based optimization technique was used compared to the full combination (FC). In case of the design of slope reinforcement in tunnel portal area, if this built-system is used, it is expected that the selection of an optimum arrangement plan can be relatively easier.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.641-651
• /
• 2019

This study investigates three buildings arranged alongside at the same level, namely, the Josadang, the Buljojeon, and the Palsangjeon. Their backside is blocked by an embankment with an environmental condition unsuitable for wooden buildings. The pillar behind the Josadang had termite damage for which termite damage and environmental investigations had been conducted for the past four years. The termite damage was monitored four times using the termite detection dogs, and the environmental factors were surveyed 27 times, except during the winter season. As a result, the locations of the columns with a high frequency of responses from the termite detection dogs were found and damage was confirmed. According to the surface moisture content investigations, the surface moisture content was highest in the Josadang and lowest in the Buljojeon. After a statistical analysis, the mean, the median, and the mode values were compared. The difference between the mean and the median was found to be less, however, the mode varied significantly. The mode values of the Josadang and the Palsangjeon were 14.5% and 10.8%, respectively, higher than the 6.1% mode value of the Buljojeon. It was concluded that the temperature and the water content affected the termite damage, which increases if the temperature and the water content remain constant owing to the environmental factors.

• KIISE Transactions on Computing Practices
• /
• v.23 no.5
• /
• pp.284-292
• /
• 2017

With the development of Internet of Things (IoT) technology, the combination of ICT and medical services has been increasing to improve the quality of medical services. Using the IoTs, we can collect personal health information continuously in a patient's everyday life. We expect that this will improve the quality of medical service through analysis. However, the problem of ensuring the protection of personal information within the personal health information has been hampering the research, development, and application of such services. Other problems include lack of IoT devices and lack of user convenience for collecting health information about a patient's everyday life. Therefore, in this study, we construct a daily health information management service that can collect the health related information at any time and store this data in personal storage. This data is then only provided to the healthcare worker when necessary. We built a test bed for an IoT-based smart home platform and are currently conducting user experiments. Based on the results of this study, we are attempting to provide a high quality medical trial service based on daily health information through linkage with medical device manufacturers, medical clinics, insurance companies, etc. We expect the proposed health information management service will contribute to the revitalization of smart health care services via activating various health related IoT devices and analyzing daily health information.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.553-560
• /
• 2014

The road tunnel install a vent for the purpose of ventilation and smoke control. Ventilation equipment capacity(number of jet fans) depends on from the condition that of the pressure and ventilation resistance. Pressure and the resistance under operating vehicle have affected on the drag coefficient. The drag coefficient of the tunnel have affected by the blockage effect and slipstream effects. However, when calculating the ventilation fan, are not properly consider taking into account such effects. Therefore, ventilation force may have been slightly overestimated. This paper describes the drag coefficient through a numerical analysis to calculate the equivalent resistance area that reflects the vehicle distance, and examined the equivalent resistance area. The ventilation coefficient corresponding to the result heavy vehicle mixing ratio of the present study was not clear. Equivalent resistance area had reduced by about 86% compared to the road design handbook current standards. Also it had analyzed and reduced to 62.2% compared to Korea Highway Corporation ventilation design criteria ratio, which is the old standard.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.51-62
• /
• 2006

This study, in order to do a nondestructive research on the mural walls kept in the protective house in Muwisa Temple, Kangjin, took four examinations; particle size analysis, XRD analysis, ultrasonic investigation, and thermo-infrared investigation. Component ratio of mural wall varied; clay of wall bodies consisted of gravel of 1.78 g, sand of 5.39 g, silt of 4.91 g and clay of 6.26 g. Ultrasonic velocity and one-axis compression strength tests done with eight mural-painted walls yield results as follows; the value of ultrasonic velocity ranged between 71.63 and 3610.11 m/s with the average of 417.44 m/s and on-axis compression strength ranged between 70.34 and $533.28kg/cm^2$ with the average of $83.23kg/cm^2$. The value increased in the order of Bosaldo(No.6)

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.781-784
• /
• 2013

Ocean dumping of sewage sludge is banned. Therefore, it is needed to develop alternative treatment method. Sewage sludge and waste glass are used to prepare lightweight brick. Large amount of energy is consumed to prepare building material, because of its high preparation temperature, or above $1,200^{\circ}C$. We study to prepare lightweight brick, using sewage sludge and waste glass as raw materials in this research. Lightweight brick was made at low temperature of below $800^{\circ}C$ to reduce $CO_2$ emission by geopolymer technique. Calcination temperature, mixing ratio of sewage sludge/waste glass and water glass/water were discussed to evaluate their effect on the brick prepared. In this study, the optimal conditions for preparing bricks was $750^{\circ}C$ of firing temperature, 1.5 of mixing ratio for water glass/water and 10 : 90 wt% of sewage sludge/waste glass. At this condition, compressive strength and specific gravity of brick prepared were 5.1 MPa and 0.46, respectively. These values satisfy the criteria on a lightweight brick.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.95-103
• /
• 2014

Purpose - Korea has a better geographical location than other nations in the Northeast Asian region. This means that Korea has an opportunity to become the center of international physical distribution in Northeast Asia. Korea should take advantage of this opportunity by exploring appropriate strategies to achieve this goal, assuming government willingness, with a view to capitalizing on the geographical advantage of the Korean peninsula and constructing a comprehensive physical distribution network system. If we prepare for this scenario, Korea could become the center of international physical distribution in Northeast Asia. Research design, data, and methodology - This study has the purpose of determining how shipping companies form partnerships with third-party logistics providers, and the relevant implications. The survey methods used were personal interview and a questionnaire distributed through e-mail, fax, mail, and telephone. A total of 600 questionnaires were distributed, out of which 285 were returned. Of the collected questionnaires, 10 were excluded because of insufficient content, leaving 275 to be used in the study as available valid samples. The data that was collected from these samples was analyzed using the data coating process and by employing a statistical package program. Results - Flexible policies, administration, and systems will be needed to create better business practices. In this dissertation, first and foremost, the results reveal that in order to become the center of Northeast Asian logistics, Korea must transition into a new paradigm based on the current economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and egalitarianism. Flexible policies, administration, and systems will be required to create better business practices. Domestic logistics corporations need to occupy a strategic logistics hub, create a logistics network, and activate value-added logistics business strategies by ensuring significant manpower and by building a logistics information system to strengthen their competitive edge, creating an improved system. Conclusions - In this dissertation, first and foremost, we point out that in order to become a center of North East Logistics, Korea should change to a new paradigm from the old one based on current economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and egalitarianism. More reasonable business laws, systems, and policies based on market-driven flexibility and transparency should be created. Moreover, social norms and rules should be reasonably established, to accomplish political and social security. Korea has to cultivate a culture of tolerance for foreign companies. This involves a change of paradigm for the development of the capital city and satellite cities. It will take a powerful task force or organization to plan and execute the vision that aims to meet these needs, accomplish the necessary goals, use the appropriate system effectively, and make Korea a key country in the field of Northeast Asian logistics.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.551-554
• /
• 2006

House management is very important in water resource protection in order to provide sustainable drinking water for about four millions population in northern Taiwan. House management can be a simple job that can be done without any ingredient of remote sensing or geographic information systems. Remote sensing and GIS integration for house management can provide more efficient management prescription when land use enforcement, soil and water conservation, sewage management, garbage collection, and reforestation have to be managed simultaneously. The objective of this paper was to integrate remote sensing and GIS to manage houses in a water resource protection district. More than four thousand houses have been surveyed and created as a house data base. Site map of every single house and very detail information consisting of address, ownership, date of creation, building materials, acreages floor by floor, parcel information, and types of house condition. Some houses have their photos in different directions. One house has its own card consists these information and these attributes were created into a house data base. Site maps of all houses were created with the same coordinates system as parcel maps, topographic maps, sewage maps, and city planning maps. Visual Basic.NET, Visual C#.NET have been implemented to develop computer programs for house information inquiry and maps overlay among house maps and other GIS map layers. Remote sensing techniques have been implemented to generate the background information of a single house in the past 15 years. Digital orthophoto maps at a scale of 1:5000 overlay with house site maps are very useful in determination of a house was there or not for a given year. Satellite images if their resolutions good enough are also very useful in this type of daily government operations. The developed house management systems can work with commercial GIS software such as ArcView and ArcPad. Remote sensing provided image information of a single house whether it was there or not in a given year. GIS provided overlay and inquiry functions to automatically extract attributes of a given house by ownership, address, and so on when certain house management prescriptions have to be made by government agency. File format is the key component that makes remote sensing and GIS integration smoothly. The developed house management systems are user friendly and can be modified to meet needs encountered in a single task of a government technician.