• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.4
• /
• pp.62-73
• /
• 2003

The study was to apply a mat style reed planting method at confluence to improve plants growth conditions by relaxing disturbed topographical base due to water flow and was intended to review the effect to build up a vegetation strip by monitoring process after the construction. First off, We've attempted to construct reed mats on selected sites as confluences of Tan and Gaehwa stream and then examined and analyzed characteristics of soil and vegetation community. As the results of the examination, the soil texture was proven to be a mix of sand and loamy sand and be 6.3 ~ 7.0 soil pH. In addition, it contained 1.0 ~ 4.6% of organic matter, 0.04 ~ 0.22% of T-N and 27.8 ~ 41.2% of water content. For its vegetation structure, the Tan stream confluence was first actually a point bar without plants prior to the construction but 8 kinds of hygrophytes including Persicaria hydropiper and 9 kinds of terrestrial plants such as Potentilla supina, Artemisia annua, and Alopecurus aequalis var. amurensis. On the other hand, the Gaehwa stream confluence contained 6 kinds of hygrophytes such as Bidens frondosa and other 11 kinds of terrestrial plants prior to the construction while it produced 7 kinds of hygrophytes including Ranunculus ternatus as well as Phragmites australis and 9 kinds of terrestrial plants such as Potentilla supina after the construction. For the Phragmites australis, almost of them was weathered away in early days just after planting because of development period passed, but on May, six months later from planting, it was investigated that its length was approximated as 65 ~ 85cm with 75% coverage and that the number of it was 437 ~ 633/$m^2$. The study was shown that reed mats can improve environmental conditions of disturbed topographical base, enabling natural growth of various riparian vegetation including the introduced plant, reed. In the meantime, it was supposedly judged that to recover or build up a vegetarian strip, supplementary materials should be prepared to help produce and grow plants because it is not probable to expect river drift by water flow at confluence and that corrosion, burying or inundation owing to changes of water lever should be considered.

• Journal of the Korean earth science society
• /
• v.25 no.7
• /
• pp.545-557
• /
• 2004

The purpose of this study is to classify types of preconception on the seasonal change to middle school students and to find out how the developed multimedia material changes their conception in the seasonal change. The questionnaire about the variation of season consisted of 10 items. Questions are given to 80 ninth graders. Control and experimental group was 23 and 57 students, respectively and they were instructed for two class periods. A learning method using multimedia was applied to the experimental group. On the other hand, traditional teaching-learning method was used for the control group. A learning method using multimedia in this study had an effect on the conceptual changes (p$<$0.01). Data in this study was divided into six levels to classify the changes of concepts in detail. As a result, it showed that a learning method using multimedia was effective for students to make progress from unscientific to scientific concepts, to build up scientific concepts, to build up scientific concepts, and to elaborate scientific concepts as compared with traditional method.

• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.61-71
• /
• 2011

The Smart Network Project is planned for achieving the Internet advanced country by adjusting the Government Future Internet Development as a national agenda. The future Internet is defined as diverse alternative technology and services that can provide optimal services for individual characteristic and situation in anywhere, anytime throughout convergence of communication, broadcasting, and computing to solve the current limitation of the Internet. This paper is to analyze the economic effects of the smart network build-up. For the economic effect analysis, we reclassified the smart network industry classification system and re-drew up 2011 Inter-industry Relations Table by using the Inter-industry Relations Table issued by the Bank of Korea and the RAS techniques. And we analyzed the economic effects that can be drawn from the investment of the smart network industry. As a result, the gross production inductive effect which appears with the economic effect of the smart network establishment project from 2011 to 2015 came out to be about 72 trillion 808.2 billion KW, added value inductive effect of 44 trillion 192.9 billion KW and the employment inductive effect of the job creation of about 412 thousands people. Afterward, it is anticipated that the smart network build-up project to contribute to the improvement of Koreans' daily life. Moreover, this research will be used as a valued basic material in the pursuit of the future network projects.

• Nuclear Engineering and Technology
• /
• v.41 no.2
• /
• pp.199-214
• /
• 2009

High burn-up transformation process in low temperature nuclear fuel oxides material was observed in the early sixties in LWR $UO_2$ fuels, but not studied in depth. Increasing progressively the fuel discharge burn-up in PWR power plants, this material transformation was again observed in 1985 and identified as an important process to be accounted for in the fuel simulations due to its expected consequence on fuel heat transfer and therefore on the fission gas release. Fission gas release was one of the major concerns in PWR fuels, mainly during transient or accidents events. The behaviour of such a material in case of rod failure was also an important aspect to analyse. Therefore several national and international programs were launched during the last 25 years to understand the mechanisms leading to the high burn-up structure formation and to evaluate the physical properties of the final material. A large observations database has been acquired, using the more sophisticated techniques available in hot cells. This large database is discussed in this paper, providing basis to build an engineering-model, which is based on phenomenological description data and information accumulated. In addition this paper has the ambition to construct the best logical model to understand restructuring.

• Fire Science and Engineering
• /
• v.15 no.4
• /
• pp.1-9
• /
• 2001

The purpose of this study is to set up disaster prevention plan and risk assessment system considering combustion velocity at traditional housing zone. The combustion velocity analysis could contribute to build in disaster prevention technique through the potential risk analysis of the area, such analysis also able to set up comprehensive disaster prevention management system. Following results have achieved through the combustion velocity calculation. \circled1 The combustion velocity was calculated in order of the below winds, the above winds and the side winds. \circled2 It must be careful to set up disaster prevention plan in case of the below winds. \circled3 The combustion velocity was calculated at the density Bone where neighboring Distance and Length was small. \circled4 It proved that factors of each parameter not mostly effect to analyse the combustion velocity in limit of the 30 minutes after ignition. \circled5 At the density zone where Distance and Length is small the duration of transfer to neighboring house takes up to 4 minutes, it is required to set up of emergency response plan to minimize the fire dispersion.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.207-214
• /
• 2014

Mass and flow resistance in a square ribbed microchannel have been studied numerically using the Lattice Boltzmann Method. It has been build up on two dimensional nine velocity vectors model with single relaxation time method called the Lattice Bhatnagor-Gross-Krook model. To analyze the roughness effect on the flow resistance namely the friction factor and mass flow has been discussed at the slip flow regime, $0.01{\leq}Kn{\leq}0.10$, where Kn is the Knudsen number. The wall roughness is considered by square microelements with a relative roughness height up to maximum 10% of channel height. The velocity profiles in terms of streamlines near the riblets are demonstrated to be responsible for the roughness effect. It is found that the roughness effect leads to increase the flow resistance with roughness height but it is decreased significantly with increasing the space between two roughness elements as well as the Knudsen number. In addition, the mass flow decreased linearly with increasing both roughness height and gap but significantly changed at the slip flow regime.

• Progress in Medical Physics
• /
• v.28 no.1
• /
• pp.33-38
• /
• 2017

Creating individualized build-up material for superficial photon beam radiation therapy at irregular surface is complex with rice or commonly used flat shape bolus. In this study, we implemented a workflow using 3D printed patient specific bolus and describe our clinical experience. To provide better fitted build-up to irregular surface, the 3D printing technique was used. The PolyLactic Acid (PLA) which processed with nontoxic plant component was used for 3D printer filament material for clinical usage. The 3D printed bolus was designed using virtual bolus structure delineated on patient CT images. Dose distributions were generated from treatment plan for bolus assigned uniform relative electron density and bolus using relative electron density from CT image and compared to evaluate the inhomogeneity effect of bolus material. Pretreatment QA is performed to verify the relative electron density applied to bolus structure by gamma analysis. As an in-vivo dosimetry, Optically Stimulated Luminescent Dosimeters (OSLD) are used to measure the skin dose. The plan comparison result shows that discrepancies between the virtual bolus plan and printed bolus plan are negligible. (0.3% maximum dose difference and 0.2% mean dose difference). The dose distribution is evaluated with gamma method (2%, 2 mm) at the center of GTV and the passing rate was 99.6%. The OSLD measurement shows 0.3% to 2.1% higher than expected dose at patient treatment lesion. In this study, we treated Mycosis fungoides patient with patient specific bolus using 3D printing technique. The accuracy of treatment plan was verified by pretreatment QA and in-vivo dosimetry. The QA results and 4 month follow up result shows the radiation treatment using 3D printing bolus is feasible to treat irregular patient skin.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.553-561
• /
• 2008

This study attempted to investigate the effect of foodservice quality perception on residence satisfaction of silver town residents. Through an extensive literature review, the questionnaire was developed and distributed to senior residents in 'A' silver town located in Gyeonggi-Do. Out of 254 questionnaires administered, a total of 212 completed questionnaires were returned, yielding a response rate of 83.5%. The results showed that there was a meaningful correlation between perception on foodservice quality and residence satisfaction. Among foodservice quality factors, reliability and comfort were the most important factors affecting residence satisfaction. Considering the effect of reliability and comfort factors on residence satisfaction, it is important to make a strategy to build up these factors in foodservice operation of silver town.

• Knowledge Management Research
• /
• v.15 no.1
• /
• pp.21-43
• /
• 2014

This paper investigate relationship between job burnout, social support and knowledge creation, sharing. also, social support are moderate on the relationship between job burnout and knowledge creation, sharing. We build up main effect and moderating effect hypothesis. To test hypothesis, survey method are performed. The results are as follows. first, emotional exhaustion and low personal accomplishment have negative effects on knowledge creation, but haven't effect on knowledge sharing. second, social support significant positively impact on knowledge creation and sharing. third, both of supervisor' support and coworker's support partially moderate the relationship between job burnout and knowledge creation, sharing. especially, emotional exhaustion reduce supervisor' support to knowledge creation, sharing and low personal accomplishment reduce co-worker' support to knowledge sharing, which means although job burnout preceded, if employees perceived high level of social support that have buffering effects on the relationships.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.788-789
• /
• 2011

A comprehensive thermo-electromagnetic model has been developed to estimate temperature and electromagnetic distribution in an three-phase induction motor under steady state operation. Electromagnetic modeling enables us to predict thermal dissipation rates by eddy-current loss and copper loss in induction motors. Non-uniform temperature distributions are investigated to account for the strong effect of local temperature build-up on the motor performance and expected life-span. For more accurate thermal modeling purpose, Heat loss mapping method, which is matched up with electromagnetic losses and volumetric heat source, is developed and performed analysis. Heat loss mapping method can be greatly used as a design or diagnostic tool for three-phase induction motors with complex structural electromagnetic fields.