• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.55-63
• /
• 2016

Recently, FTA may go beyond the agreement of the two countries, and also FTA is tinged aspects of Mega FTA between the economic sphere, under the situation that FTA and the business model are mutually intertwined in convergence industrial environments. Since South Korea came into force in 52 countries and 15 cases of FTA, South Korea have completed FTA network with the United States, as well as ASEAN and most of OECD member countries, and South Korea is now a critical time to take advantage of the FTA to determine the South Korea's economic performance. This paper examined the previous studies of FTA utilization and analyzed practical usages and problems of SMEs' FTA utilization. Through analysis, this paper suggests that the Training Plans of SMEs' Origin Management Specialist for the Improvement of FTA Utilization is as follows: to build up the effective management system of origin supports, to enrich the origin management competency, to reinforce the operation of supporting system, and to strengthen practical capacity of Origin administrative staff. Based on the results, it is expected to provide the policy implications for the FTA utilization in the future.

• Proceedings of the Ginseng society Conference
• /
• 1980.09a
• /
• pp.151-170
• /
• 1980

Physiological response of Panax ginseng var. atropurpureacaulo (purple stem variety, Pg) to light was reviewed through old literatures and recent experiments. Canopy structure, growth, pigment, leaf anatomy, disease occurence, transpiration, photosynthesis (PS), leaf saponin, photoperiodism and nutrient uptake were concerned. P. ginseng var. xanthocarpus (yellow berry variety, Px) and Panax quinquefolius(Pq) were compared with Pg if possible. Compensation point(Cp) increased with increase of light and ranged from 110 to 150 at $20^{\circ}C$ but from 140 to 220 at $30^{\circ}C$ with 4 to 15 Klux indicating occurence of light and temperature-dependent high photorespiration. Characteristics of Korea ginseng to hate high temperature was well accordance with an observation 2000 years ago. Korea ginseng showed lower Cp and appeared to be more tolerant to high light intensity and temperature than American sheng although the latter showed greater PS, stomata frequency and conductance, chlorophyll and carotenoids. Px showed lower PS than Pg probably due to higher Cp. Total leaf saponin was higher in leaves grown under high light. Ratio or diol saponin and triol saponin(PT/PD) decreased with increase of light intensity during growing mainly due to decrease of ginsenoside $Rg_1$ but increase of ginsenoside Rd. Leaves of Pg and Px had $Rg_1$ but no $Rb_3$ which was only found as much as $20\%$ of total in Pq leaves, and decreased with increase of light intensity. Re increased in Pg and Px but decreased in Pq with increase of light. PT/PD in leaf ranged 1.0-1.5 in Pg and Px but around 0.5 in Pq. Korea ginseng has Yang characteristics(tolerant to high light and temperature), cultured under Eum(shade) condition and long been used for Yang efficacy (to build up energy) while Pq was quite contrary. Traditional low light $intensity(3-8\%)$ for Korea ginseng culture appeared to be strongly related to historical unique quality. Effect of light quality and photoperiodism was not well known. Experiences are long but scientific knowledge is short for production and quality assessment of ginseng. Recent scientific knowledge of ginseng should learn wisdom from old experiences.

• Preventive Nutrition and Food Science
• /
• v.10 no.2
• /
• pp.198-205
• /
• 2005

Korean medicated diet (KMD) is not a simple combination of food and Chinese drugs, but a special carefully constructed diet made from Sasang constitutional medicines, food and condiments under the theoretical guidance of diet preparation based on differentiation of symptoms and signs of traditional Sasang medicine (TSM). It combines the functional efficacy of medicine with the delicacy of food, and can be used to prevent and cure diseases, build up one's health and prolong one's life. Korean traditional medicated diet has a long history of development. Although influenced by Chinese medicine, Korean traditional medicine has been developed into a unique system of traditional medicine that has surpassed the continental medical practice, sublimating itself into a native medical practice suitable to Korean lifestyles and physical constitutions. In the 19th century, Lee Jema's Sasang medicine (medicine of four types of energy determining the physical constitution) was introduced. It is an integration of mind and body according to the individual's physical constitution that is categorized allowing a customized method of treatment ideal for each category-making the content of Korean traditional medicated diet even richer. The characteristics of Korean medicated diet are as follows: (1) Laying stress on the wole, selecting medicated diet on the basis of differential diagnosis. (2) Suitable for prevention and treatment, outstanding in effect. (3) Good in taste, convenient for taking. KMD refers to drink and food according to certain prescriptions, by processing and cooking that can be used either for prevention and cure of diseases, or for health care and recovery. The purpose of this review is to introduce TSM and KMD based on Sasang constitutional medicines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.27-35
• /
• 1998

In this paper, we propose a novel spectral-chopping model of Class-II$(1+D)^2$ -PRS system which reveals improved spectral efficiency. We build up the model having spectrum chopped by the amount of Nyquist over-rate, and then compare its characteristics with the conventional model in both the time-domain and the frequency-domain. When the transmission system operates above the Nyquist rate, the new model has better performance than the conventional PRS using its inherent speed-tolerance. According to our investigations, Class-II PRS shows more excellent effect in the spectral-chopping method than Class- I and W types analyzed previously. We ascertain that the over-rate of 26.675 obtained by the inherent speed-tolerance could be improved upto 40% using spectrum-truncation. These effects come from the fact that the raised-cosine spectrum of Class-II PRS has smaller Boss of frequency component and energy than any other types for the same amount of truncation. In order to validate these theoretical results, we present their sidelobe-trends confirming cancellation effects at the sampling instants and some experimental results showing their patterns of eye-openings and spectra.

• Archives of design research
• /
• v.17 no.1
• /
• pp.289-298
• /
• 2004

With the advance of digital technology, development of exclusive CAD system for fashion textile that may suggest the future of fashion textile industry is increasingly accelerated. To build up the foundation of digital culture, it is required for fashion textile industry to develop goods with high value added and make rapid change of production system, and actually, exclusive programs are being developed to meet with the desire. Present study considers the vicissitude of fashion textile and the composition and characteristics of design system, and compares and analyses a variety of design developments of digital fashion textile. And it systemizes the expansion and change of creative digital pattern designs that are developed differing from existing graphic program, the expression of suitable textile texture, and the simulation effect by three-dimension modeling. By separating the usage of CAD system for fashion textile into designing and producing aspects, it also focuses on increasing the usage of exclusive CAD system for fashion textile.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.1
• /
• pp.51-62
• /
• 2010

The high concentration of N in the wastewater from livestock farming generally renders the efficiency of the wastewater treatment. Therefore, removal of N in livestock wastewater is crucial for successful treatment. The current study was conducted to investigate the optimum conditions for partial nitrification under anaerobic condition following nitritation in TPAD-BNR(two-phase anaerobic digestion-biological nitrogen removal) operating system. Sequential operating test to stimulate partial nitrification in reactor showed that partial nitrification occurred at a ratio of 1.24 in $NO_2{^-}$-N:$NH_4{^+}$-N. With this result, a wide range of factors affecting stable nitritation were examined through regression analysis. In the livestock wastewater treatment procedure, the hydraulic retention time (HRT) and pH range for optimum nitrite accumulation in the reactor were 1-1.5 days and 7-8, respectively. It was appeared that accumulation of $NO_2{^-}$-N in the reactor is due to inhibition of the $NO_2{^-}$-N oxidizer by free ammonia (FA) while the effect of free nitrous acid was minimal. Nitrification was not influenced by DO concentration at a range of 2.0-3.0 mg/L and the difference in the growth rate between $NH_4{^+}$-N oxidizer and $NO_2{^-}$-N oxidizer was dependent on the temperature in the reactor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.690-699
• /
• 2008

In this paper a conventional approach for design and analysis of subsonic air vehicle is used. First of all subsonic aerodynamic coefficients are calculated using Computational Fluid Dynamics(CFD) tools and then wind-tunnel model was developed that integrates vehicle components including control surfaces and initial data is validated as well as refined to enhance aerodynamic efficiency of control surfaces. Experimental data and limited computational fluid dynamics solutions were obtained over a Mach number range of 0.5 to 0.8. The experimental data show the component build-up effects and the aerodynamic characteristics of the fully integrated configurations, including control surface effectiveness. The aerodynamic performance of the fully integrated configurations is comparable to previously tested subsonic vehicle models. Mathematical model of the dynamic equations in 6-Degree of Freedom(DOF) is then simulated using MATLAB/SIMULINK to simulate trajectory of vehicle. Effect of altitude on range, Mach no and stability is also shown. The approach presented here is suitable enough for preliminary conceptual design. The trajectory evaluation method devised accurately predicted the performance for the air vehicle studied. Formulas for the aerodynamic coefficients for this model are constructed to include the effects of several different aspects contributing to the aerodynamic performance of the vehicle. Characteristic parameter values of the model are compared with those found in a different set of similar air vehicle simulations. We execute a set of example problems which solve the dynamic equations to find the aircraft trajectory given specified control inputs.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.173-180
• /
• 2017

In this paper, we propose a project-based learning using Arduino as an example of embedded system class in engineering students. By introducing these Project-Based Learning(PBL) into engineering education, students became able to actualize individual theories that they had learned through their major curriculum and they were given the experience to build up their field work ability by participating in the whole project development process. We conducted a questionnaire survey to investigate the education effect of PBL before and after class and the results were analyzed using SPSS statistical program. Since PBL is mainly operated by a team system, communication skills and teamwork within the organization can be improved through interactions among the members. All of the materials produced during the course of the project could be used to make portfolio of students, which could be of great help to data for employment activities after graduation.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.113-120
• /
• 2018

The one-way gas valve developed in this study was designed to prevent the breakage of packages from increased internal pressure, which is a problem in packaged Kimchi, and simultaneously reduce the outflow of the offodor release. The effect of the one-way gas valve on the headspace atmospheric compositions was investigated in the packaging system. The changes of atmospheric compositions and quality factors of Kimchi, such as $CO_2$ accumulation, pH, titratable acidity, and salinity, were measured during a 4-week storage period at $4^{\circ}C$. The Kimchi package with the one-way gas valve dramatically reduced pressure build-up in the pouch by allowing the controlled flow of gas to the atmosphere. In addition, the package design allows the possibility of controlling the gas generated from Kimchi by adjusting the viscosity of the open pressure control oil. The one-way gas valve did not affect the sensory characteristics of Kimchi products during the storage period. Furthermore, the deodorizing capability of the activated carbon contained in the one-way gas valve effectively reduced the off-odor of Kimchi products released along with carbon dioxide. The novel one-way gas valve is considered to be an active packaging system that can solve major problems of expansion and off-odor leakage in the packaging of Kimchi.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.151-158
• /
• 2019

In this paper, we conducted a study to understand the impacts of safety behavior, safety and health delivery and communication, which should be managed for the establishments' safety and health control on occupational safety and health policy satisfaction to utilize that as a material for preparing policy support and preventive measures. For this purpose, we conducted a statistic analysis with 2,970 establishments, utilizing the material, "2015 Occupational Safety and Health Company Survey". As a result, in the manufacturing industry, it turned out in the establishments with more than 300 workers, safety behavior, safety and health delivery and communication of the cooperative firm of the prime contractor were high. In addition, it turned out that safety behaviors had the biggest impact on occupational safety and health policy satisfaction in the manufacturing industry and safety and health delivery and communication had the biggest impact on occupational safety and health policy satisfaction in the construction industry and other industries. As for the relationship between companies, it turned out that safety behaviors had the biggest impact on that between the parent company and a cooperative firm of a prime contractor while safety and health delivery and communication on that between the prime contractor and the subcontractor. Through the results of this study, it is necessary to build up safety and health behavior and safety and health delivery and communication systems for the characteristics of the company, and it is expected that the effect of the safety and health control will increase when policy support is made accordingly.