• 인터넷정보학회논문지
• /
• 제10권4호
• /
• pp.199-211
• /
• 2009

최근 무선네트워크 기술은 이동 응용프로그램을 위해 이종통신망 연결패스 상에서 병렬로 스트라이핑 데이터 기술을 이용해 고속 데이터를 전달을 가능케 한다 [2]. 전통적으로 대역폭지연프로덕트(BDP) 기반에서 고속전송은 송신자 측에서 다중 TCP 소켓의 튜닝을 요구한다. 더욱이, 메모리와 네트워크 요구의 균형을 유지하는 ATBT같은 기술은 유선기반의 단일 소켓상에서 하나의 플로우만 가정하여 설계되었다. 그러므로 본 논문은 여러 무선 패스를 경유하는 이종 무선네트워크 상에서 고속전송을 가능케하는 스트라이핑 전송기술에 적합한 버퍼튜닝 기술을 제안한다. 제안 기술은 이동성, 링크손실, 대역폭변동성 등의 특징을 지닌 무선 멀티홈 모바일 호스트상에서 작동하는 전송계층에서의 자원관리기술이다. 실험을 통하여 유선기반의 ATBT를 본 환경에 적용한 것보다 메모리, 평균 전송량에 있어 제안 기술의 성능이 우수하다.

• 방사성폐기물학회지
• /
• 제18권1호
• /
• pp.43-49
• /
• 2020

고준위폐기물을 심지층에 처분하기 위한 공학적방벽의 구성 요소로는 처분용기, 완충재, 뒷채움재 등이 있다. 이 중 완충재는 처분용기와 근계암반 사이의 빈 공간에 설치되는 물질로써, 주변 지하수로부터 처분용기를 보호하며 방사성 핵종의 유출을 저지하는 등의 역할을 한다. 또한 처분용기에서 발생하는 고온의 열량은 완충재로 직접 전파되기에 완충재의 열전도도는 처분시스템의 안전성 평가에 있어 매우 중요하다고 할 수 있다. 따라서 본 연구에서는 국내 경주산 압축 벤토나이트 완충재의 열전도도 특성을 규명하였으며 실제 처분용기에서 발생되는 고온의 특성을 반영하여 상온에서 80~90℃까지의 범위에서 압축 벤토나이트의 열전도도를 측정하였다. 온도증가에 따라 압축 벤토나이트의 열전도도는 5~20% 가량 증가하였으며 초기 포화도가 클수록 열전도도 증가는 더 크게 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.380-380
• /
• 2010

Currently, organic light-emitting diodes (OLEDs) have been proven of their readiness for commercialization in terms of lifetime and efficiency. In accordance with emerging new technologies, enhancement of light efficiency and extension of application fields are required. Particularly inverted structures, in which electron injection occurs at bottom and hole injection on top, show crucial advantages due to their easy integration with Si-based driving circuits for active matrix OLED as well as large open area for brighter illumination. In order to get better performance and process reliability, usually a proper buffer layer for carrier injection is needed. In inverted top emission OLED, the buffer layer should protect underlying organic materials against destructive particles during the electrode deposition, in addition to increasing their efficiency by reducing carrier injection barrier. For hole injection layers, there are several requirements for the buffer layer, such as high transparency, high work function, and reasonable electrical conductivity. As a buffer material, a few kinds of transition metal oxides for inverted OLED applications have been successfully utilized aiming at efficient hole injection properties. Among them, we chose 2 nm of $WO_3$ between NPB [N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] and Au (or Al) films. The interfacial energy-level alignment and chemical reaction as a function of film coverage have been measured by using in-situ ultraviolet and X-ray photoelectron spectroscopy. It turned out that the $WO_3$ interlayer substantially reduces the hole injection barrier irrespective of the kind of electrode metals. It also avoids direct chemical interaction between NPB and metal atoms. This observation clearly validates the use of $WO_3$ interlayer as hole injection for inverted OLED applications.

• 사물인터넷융복합논문지
• /
• 제8권4호
• /
• pp.1-7
• /
• 2022

IoT 네트워크에서 클러스터와 싱크 노드 사이의 게이트웨이 역할을 하는 클러스터 헤드의 전력 관리는 IoT 단말의 수가 증가함에 따라 점점 더 중요해지고 있다. 특히 클러스터 헤드가 이동성을 가진 무선 단말인 경우, IoT 네트워크의 수명을 위하여 전력 소모를 최소화할 필요가 있다. 또한 IoT 네트워크에서의 전송 딜레이는 IoT 네트워크에서의 빠른 정보 수집을 위한 주요한 척도 중 하나이다. 본 논문에서는 IoT 네트워크에서 정보의 전송 딜레이를 고려한 저전력 버퍼 관리 기법을 제안한다. 제안하는 기법에서는 심층 강화학습 방법에서 사용되는 심층 Q 학습(Deep Q learning)를 사용하여 수신된 패킷을 포워딩하거나 폐기함으로써 전송 딜레이를 줄이면서도 소비 전력을 절약할 수 있다. 제안한 알고리즘은 비교에 사용된 기존 버퍼 관리 기법과 비교하여 Slotted ALOHA 프로토콜 기준 소모 전력 및 딜레이를 개선함을 보였다.

• 한국시뮬레이션학회논문지
• /
• 제9권1호
• /
• pp.21-38
• /
• 2000

A fuzzy dispatching algorithm with adaptable control scheme is proposed for more flexible and adaptable operation of AGV system. The basic idea of the algorithm is prioritization of all move requests based on the fuzzy urgency. The fuzzy urgency is measured by the fuzzy multi-criteria decision-making method, utilizing the relevant information such as incoming and outgoing buffer status, elapsed time of move request, and AGV traveling distance. At every dispatching decision point, the algorithm prioritizes all move requests based on the fuzzy urgency. The performance of the proposed algorithm is compared with several dispatching algorithms in terms of system throughput in a hypothetical job shop environment. Simulation experiments are carried out varying the level of criticality ratio of AGVs , the numbers of AGVs, and the buffer capacities. The rule presented in this study appears to be more effective for dispatching AGVs than the other rules.

• Journal of Plant Biology
• /
• 제34권1호
• /
• pp.19-23
• /
• 1991

벼의 종자로부터 embryogenic callus를 유도하고 이로부터 개체로의 재분화를 유도하였으며, embroyogenic cell suspension culture를 통하여, 이로부터 원형질체를 분리, 배양하여 embryogenic callus를 형성하였다. 또한, 분리된 원형질체를 electroporation하였을 때 생존율(viability)에 미치는 여러 요인들을 조사하였다. 원형질체의 생존율은 voltage와 capactiance가 증가할수록 감소를 보였으며, HBM buffer에서 $4^{\circ}C$로 electroporation 하였을 때 생존율에 보다 효과적이었다.

• 한국생활과학회지
• /
• 제7권2호
• /
• pp.11-22
• /
• 1998

Social support may be a crucial aspect in single mothers' adjustment from the loss of spouse. Using a survey data collected from 285 widowed or divorced mothers, this study investigated whether social support buffers the deleterious effects of stress on psychological adjustment among poor single mothers. Results revealed that social support is not provided for at a desirable level. After controlling the single mothers' characteristics, stress in daily life, emotional support, job status and child relationship were associated with depression of them. It was also founded that emotional support buffer the negative effect of stress on depression of single mothers. Therefore, the support programs focused on emotional support are necessary for single mothers to enhance their mental health.

• 한국경영과학회지
• /
• 제32권3호
• /
• pp.17-31
• /
• 2007

In this paper, we consider a service system with bi-functional servers, which can switch between the primary service room and the secondary room. A service policy is characterized by the switching paints which depend on the queue length in the primary service room and the service level requirement constraint of the secondary room. The primary service room is modeled as a Markovian queueing system and the throughput of the primary service room is function of the total number of bi-functional servers. the buffer capacity of the primary service room, and the service policy. There is a revenue obtained from throughput and costs due to servers and buffers. We study the problem of simuitaneously determining the optimal number of servers, buffer capacity, and service policy to maximize profit of the service system, and develop an algorithm which can be successfully applied with the small number of computations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1150-1155
• /
• 2004

In this paper, safety requirements for guard rails, buffer stops, defensive structures, anti-fire facilities, and safety sidings are studied to establish a standard. Various kinds of guard rails and their construction methods are investigated. Researches on the level difference of main track and guard rail, joint. length, and fastening force of guard rail are done. The classification of buffer stops, defensive structures, anti-fire facilities, and safety sidings and its characteristics are examined. From this study, fundamental data on the safety facilities of urban railway system are established.

• 산업공학
• /
• 제16권spc호
• /
• pp.93-98
• /
• 2003

This paper addresses an AGV dispatching problem in semiconductor clean-room bays where AGVs move cassettes of wafers between machines or machines and a central buffer. Since each machine in a bay has a local buffer of limited capacity, material flow should be controlled in a careful way to maintain high system performance. It is regarded that two most important performance measures in a semiconductor bay are throughput rate and lead-time. The throughput rate is determined by a bottleneck resource and the lead-time depends on smooth material flow in the system. This paper presents an AGV dispatching procedure based on the concept of theory of constraints (TOC), by which dispatching decisions are made to utilize the bottleneck resource at the maximum level and to smooth the flow of material. The new dispatching procedure is compared with existing dispatching rules through simulation experiments.