• The Journal of the Petrological Society of Korea
• /
• v.21 no.4
• /
• pp.405-413
• /
• 2012

This study demonstrates the consolidation effect of ethylsilicate consolidants considering material characteristics and weathering degree of Samneunggyeseongakyukjonbul(rock-carved Yukjonbul Buddha in Samneung Valley) in Namsan, Gyeongju. The buddha statue is composed of alkali feldspar granite and contains numerous sets of joint with exfoliation and granular disintegration, therefore the statue is necessary to be treated for surface strength. The laboratory and in-situ tests of consolidation effect showed more increase of ultrasonic velocity that KSE 300, a relatively highly concentrated consolidant, performed more increase of ultrasonic velocity and decrease of porosity than others after treatments in weathered granite. And the consolidated rock with OH 100 was more resistant to salt weathering. For the buddha statues, KSE 300 is more applicable to enhance surface strength because it showed higher consolidation effect for long term than OH 100 and the statues has not been weathered by salts.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.246-263
• /
• 2019

The stone Buddha statue of Sangunsa Temple at Bukhansan in Goyang, Gyeonggi Province, is an excellent example of stone Buddha statues created in the late 15th century. On the base of the figure, there is an inscription, which informs that it was produced in 1497. In recognition of this significance, it was recently designated as a tangible cultural asset in Gyeonggi-do. Thus, this paper tried to evaluate the value of the statue by analyzing iconography and style. The characteristics of a typical 15th-century style that the Buddha statue of Sangunsa Temple shows are the form of ushnisha, the way clothes are worn, the form of a w-shaped chest muscle, and the simple lotus pedestal. On the other hand, the elongation of the waist and the disappearance of the waistband on undergarments are new forms of Buddha statues in the 16th century. Besides, parting the hair in the middle of the head and leaf-shaped short ribbon draped on undergarments are unique features that only appear on the statue of Sangunsa Temple. Sangunsa has been known to be built in the early 18th century based on Bukanji compiled by Seongneung in 1745, and Bongeunbonmalsaji composed in 1943. However, the statue was created in the late 15th century, before the establishment of the temple in the early 18th century. Therefore, this paper briefly reviewed the history of Sangunsa Temple, focusing on the initial period, referring to the historical sites and the relics that were passed on to the temple, as well as the literature records. The data newly referred to in the study are as follows: Sangunsa Stone Pagoda, presumed to be from the Goryeo Dynasty; the Stone Buddha Statue of Sangunsa; Wooden Amita Triad Buddha Statue of Sangunsa. According to the data and contrary to previously-held beliefs, Sangunsa Temple is believed to have been operating since the Goryeo Dynasty. It can be inferred through analysis of the stone Buddha statue of Sangunsa Temple that the size of the Temple before the 18th century was not very large.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.242-281
• /
• 2010

There are a large number of Buddhist cultural relics in Mt. Namsan. The cultural relics carry the spirit of people of Shila who dream of Buddhist Elysium and the establishment of Buddhist nation. In the valley and the top of the mountain and on various rock cliff, stone statues of Buddha and stone pagodas stand in harmony with nature. For that reason, Mt. Namsan is called an open-air museum. And it played an important role in establishing 'The UNESCO World Heritage' status for Gyeongdju in December 2000. But sadly, there are many stone relics that have eroded away and damaged from collapsing in the passage of time. The seated stone statue of Buddha in Samreoung valley of Mt. Namsan is one of them. It was created between the 8th and 9th century, and restored without much care nor extensive historical research in 1923. As a result, The face of the Buddha remained with concrete mortar and its nimbus fallen backward and destroyed. Therefore, restoration and repair as well as creation of a statue environment for the statue were urgent. So we immediately started in restoration and repair. First, through the archaeological excavation around the stone Buddha, we carried the stone Buddha on the original position. In order to restore the statues to its original glory created by the Unified Shila Dynasty, we created a restoration plan in corporation with art historians and historians, then restored the jaw and the damage nimbus. Second, we made the weathering & damage map of the stone Buddha. In order to prevent second damage, we cleaned the surface of contaminants with distilled water. Third, we studied restoration method to prevent artificial damage. We recreated parts of his face and halo. Then each parts of the statue were restored to their original position. In the whole process of restoration, we tried to use traditional techniques.

• Journal of architectural history
• /
• v.25 no.6
• /
• pp.35-44
• /
• 2016

The purpose of this study is to identify the aspect of expression about the form of Shwedagon Pagoda as well as to find out its meanings. The aesthetic value of Shwedagon Pagoda appears as the worship and infinite respect to Buddha realizing its beautiful sacred symbol. The meaning of Shwedagon Pagoda is to progress in keeping pace with the specific flexibility of Buddhism in Myanmar developing Buddhistic diversity and accepting its active changes. As time passes, Shwedagon Pagoda has been transformed. It is because that Myanmar's architecture was developed independently being affected by India with the introduction of Buddhism, and accepted it through autonomous reinterpretation. Then, the function of the worship space surrounding Shwedagon was extended and its annexes and statues of the Buddha were built; its scale became larger. This study shows the comparison between Shwezigon Pagoda and Shwedagon Pagoda. This method of investigation reveals that the formal changes of Shwedagon makes it transform to concise composition and develop aesthetical component giving the sense of vertical rise.

• Journal of architectural history
• /
• v.20 no.1
• /
• pp.95-116
• /
• 2011

It is a true fact that the ancient Buddhist temples of Korea were great, important historical influence revealing the transition and developing stages of all the BUddhist temples in Eastern Asia including China and Japan. Before Mahayana arose within India, the monastery and pagoda were united during the conflict and development of the original Buddhism and pagoda faith. With the arising of Mahayana and the introduction of Buddhist statues, the Buddhist temple and pagoda were in conflict and resulted in separation. With the creation and development of the Mahayana Bodhisattva concept, Hinayana and Mahayana started to show doctrine differences and expressed each others' characteristics relevant to the structure of the temple. As a result, the Buddhist Temple having 1 pagoda spread in China together with Hinayana and Mahayana. The Buddhist temple of Hinayana had its temple and pagoda separated and the Buddhist temple that has a pagoda in front was divided into a form of 1 pagoda and 1 main temple. The temple and pagoda for Mahayana in the form of 1 pagoda and 2 temple, where the main statue of the Buddha may be worshipped from both the left and right hand sides, were separated in the form of 1 pagoda and 3 temples to have its original form again. Mahayana was first introduced into Goguryeo through the routes in the northern region and developed from having 1 pagoda and 2 temples, to having 1 pagoda and 3 temples. China was influenced by the southern regions, which is why Abhidharma was introduced into Baekje. Later on, the importance of Bodhisattva increased and the transition speed of the Buddhist temple having 1 pagoda and 3 temples accelerated, as Buddhism became more popular and as Mahayana flourished. The statue of the Buddha on both sides of the pagoda shall gradually move next to the central temple, and the temple shall form large crowds to not only form a tacit boundary with the pagoda but the expansion of Bodhisattva shall also have a wall or a corridor constructed in between the central, left and right hand side temples to form separate areas, and shall have a pagoda built in front of the temples that worship from both sides. In conclusion, independence shall exist among each Bodhisattva within the Buddhist temple, and the status of the pagoda shall fall and appear as the pagoda on both sides in front of the main Buddha statue.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.2 no.1
• /
• pp.54-64
• /
• 1984

This paper is a study on structural measurement by using a terrestrial camera. The aim of this paper is to understand the method of a composition by analyzing the geometrical compositive ratio of threestoried pagodas at Gamun-Sa, Gosun-Sa, Bulguk-Sa, Seated iron Buddha in Kwang-Jn, and Main-Seat Buddha at Sukkuram Cave-temple. Measured data and contour maps are accurately obtained by means of photogrammetry, and the following points are able to he found by analyzing them. At first, for Stone Pagodas. the breaths of the Okgesuks are made to the ratio, 8 : 7 : 6. And when an equililateral triangle and an 45$^{\circ}$ isosceles triangle are drawn of which the bases are the length of the upper Gabsuk, and then a circle is drawn whose radius is the length between the vertexes of the two triangles and its center is the vertex of the former the circle passes the upper line of the third Oksin. Also it can be found that an $70^{\circ}$ isosceles triangle being drawn at base line, the triangle passes the edge point of the upper Gabsuk and the center of the third Okgesuk. Also for Budha statues, it can be found that circles whose center is that of eyes can be drawn, and if 2 lines which pass the shoulder and the center of Buddha's body are extended, they intersect the knees.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.164-179
• /
• 2014

The Buddhas of the Three Words in a form of arranging Bhaiṣajyaguru and $Amit{\bar{a}}bha$ at its side based on ${\acute{S}}{\bar{a}}kyamuni$ at the center is enshrined in Daeungbojeon Hall of Daeheungsa Temple located at Haenam. So far, this Buddhas of the Three Words has been known as a wooden Buddha statue. However, as a result of X-ray screening, in left/right Buddha statues excepting main Buddha, wood and molding clay layer were observed at the same time. Therefore, this study intended to observe its internal structure, grafting method and to clarify making technique of Buddha statue during Joseon era based on image information being obtained through X-ray screening of The Buddhas of the Three Words of Daeheungsa Temple. As its result, it was revealed that form of ${\acute{S}}{\bar{a}}kyamuni$ was completed by mainly grafting 5 pieces of timber and this statue shows a typical wood grafted Buddha statue during Joseon era. Form of Bhaiṣajyaguru and $Amit{\bar{a}}bha$ were completed based on molding technique by applying clay on sculpture similar to its appearance after sculpturing more than 10 pieces of timber through its grafting. In other words, internal timber is considered to play a role of its core and grafting method of timber is more close to a technique of molding Buddha statue than to that of wooden Buddha statue during Joseon era. However, clay was directly applied on timber thinly, not applying clay thickly on it after winding straw rope on wooden core and its characteristic is that its facial area was completely composed of wooden construction only. Therefore, it is hard to rule out a possibility that the original sculpturing intention of an artist might be a wooden Buddha statue but in view of the fact that a word, 'molding' was used in a record of relics buried in statue, it could be seen that this Buddha statue might have been recognized as a molding statue at the time when creation of this statue was completed. It is considered that number of case of making statue based on this technique would be more increased when more results of X-ray screening should be accumulated and if more data should be collected, it would provide a significant evidence for identifying chronological, regional aspects of making technique of Buddha statue.

• Journal of architectural history
• /
• v.19 no.4
• /
• pp.109-123
• /
• 2010

The main functions of a Buddhist temples are as a place for Buddhist services and a place for sermons and each ancient Buddhist temple was equipped with a main and separate building. After Zen Buddhism was first introduced, there was a tendency to change the terms to Buddhist sanctuary and altar, as set forth in the Zen Buddhism code of conduct called 'Cheonggyu(淸規)'. As such, it was thought that the division between Buddhist service space and preaching space were relatively firm until the Goryeo Dynasty. However in the period from the end of the Goryeo to the beginning of the Joseon Dynasty there was an increasing tendency of integration of the two buildings. It can be seen that, in cases where both buildings remained, statues of Buddha were enshrined in these buildings without any distinction. Eventually it is led to the tradition of duo-Buddhist sanctums.

• Journal of architectural history
• /
• v.12 no.2 s.34
• /
• pp.7-20
• /
• 2003

The main buildings of the important Buddhist temples - the pagoda, the Buddhist sanctum, the lecture hall - was surrounded by the cloister until Koryo Dynasty. And the Buddhist sanctum was located the center. It meant that the Buddhist sanctum was important building. It is very important thing that we understand the usage of the interior space because the architectural space consists of the unified space by the organic function of the interior space and the exterior space. But there is not so much the study on the interior space of the Buddhist sanctum. So, the purpose of this study is to understand of the interior space of the Buddhist sanctum in Ancient and Medieval Times. Till now, it was impossible that the Buddhist monk or the General public entered the Buddhist sanctum in Ancient and Medieval Times because they regarded the Buddhist sanctum as the place of sacrosanctity and the floor was finished by bricks. But, we saw that they could enter the Buddhist sanctum. Of course the floor of the Buddhist sanctum was finished by bricks, but they spread mats on the floor, took off his shoes in the interior space and used the furniture for sitting on. The plan of the Buddhist sanctum was designed by the process of the ceremony and the way of the enshrinement of the Buddhist statues because it is the place to enshrine the Buddhist statues. They performed the ceremony like as pray, worship, offer food to Buddha, HaengDo - an act to turn round an object of worship - and so on in the interior space of the Buddhist sanctum.

• Journal of Conservation Science
• /
• v.36 no.4
• /
• pp.296-305
• /
• 2020

Konbaung Dynasty was the last unified dynasty that ruled Myanmar from 18^th to 19^th century. During this time Buddhist art flourished in Myanmar due to the interest of the rulers toward their traditional culture. Metal decorative artifacts in the 18^th century are classified into structures and Buddha statues. They are further subdivided into gilt-bronze and bronze objects, depending on their material component. Three-dimensional gilt-bronze decorative artifacts were cast with a brass alloy of Cu-Zn-Sn-Pb and their surfaces were gilded with extremely thin gold leaves (less than 1 ㎛ in thickness). The gilded layer approximately comprised 10 wt% silver in addition to the main element, gold. The lack of Hg in the gilded layer, indicated that the amalgam gilding technique was not applied. The analysis results indicated that the lacquered gilding technique was applied to the objects. Bronze decorative artifacts without gilding were cast with materials containing Cu-Sn-Pb. The bronze pavilions and bronze Buddha staues were crafted using the same alloy of high-tin bronze, which approximately contained 20 wt% Sn. No heat treatment was applied to reduce the brittleness of the objects after they were cast with a large amount of Sn. The most significant difference between the gilt-bronze and bronze decorative artifacts lie in their elemental compositions. The gilt-bronze decorative artifacts with their gilded surface were manufactured using brass containing zinc, while the unplated bronze decorative artifacts were composed of bronze containing tin. Artifacts of the same type and size are classified differently depending on the materials utilized in the surface treatment such as gilding.