• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.210-217
• /
• 2007

• 대한설비공학회지:설비저널
• /
• 제8권1호
• /
• pp.10-13
• /
• 1979

The study for bubbling phenomena to influence heat transfer in gas - liquid contactors. The sparged contactor is gaining importance for gas-liquid chemical reactions. In this paper, correlations between Reynolds number and heat transfer coefficient were studied and experimental expressions were also obtained over broth of areas, namely, laminar area and turbulent area respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.107-107
• /
• 2010

Hydrogen is an alternative fuel for the future energy which can reduce pollutants and greenhouse gases. Synthesis gas have played an important role of synthesizing the valuable chemical compound, for example methanol, DME and GTL chemicals. Renewable biomass feedstocks can be potentially used for fuels and chemical production. Current thermal processing techniques such as fast pyrolysis, slow pyrolysis, and gasification tend to generate products with a large slate of compounds. Lignocellulose feedstocks such as forest residues are promising for the production of bio-oil and synthesis gas. Pyrolysis and gasification was investigated using thermogravimetric analyzer (TGA) and bubbling fluidized bed gasification reactor to utilize forest woody biomass. Most of the materials decomposed between $320^{\circ}C$ and $380^{\circ}C$ at heating rates of $5{\sim}20^{\circ}C/min$ in thermogravimetric analysis. Bubbling fluidized bed reactor were use to study gasification characteristics, and the effects of reaction temperature, residence time and feedstocks on gas yields and selectivities were investigated. With increasing temperature from $750^{\circ}C$ to $850^{\circ}C$, the yield of char decreased, whereas the yield of gas increased. The gaseous products consisted of mostly CO, CO2, H2 and a small fraction of C1-C4 hydrocarbons.

• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.587-594
• /
• 2010

Hydrogen is an alternative fuel for the future energy which can reduce pollutants and greenhouse gases. Synthesis gas has played an important role of synthesizing the valuable chemical compounds, for example methanol, DME and GTL chemicals. Renewable biomass feedstocks can be potentially used for fuel and chemicals. Current thermal processing techniques such as fast pyrolysis, slow pyrolysis, and gasification tend to generate products with a large slate of compounds. Lignocellulose feedstocks such as forest residues are promising for the production of bio-oil and synthesis gas. Pyrolysis and gasification was investigated using thermogravimetric analyzer (TGA) and bubbling fluidized bed gasification reactor to utilize forest woody biomass. Most of the materials decomposed between $320^{\circ}C$ and $380^{\circ}C$ at heating rates of $5{\sim}20^{\circ}C$/min in thermogravimetric analysis. Bubbling fluidized bed reactor was used to study gasification characteristics, and the effects of reaction temperature, residence time and feedstocks on gas yields and selectivities were investigated. With increasing temperature from $750^{\circ}C$ to $850^{\circ}C$, the yield of char decreased, whereas the yield of gas increased. The gaseous products consisted of mostly CO, $CO_2$, $H_2$ and a small fraction of $C_1-C_4$ hydrocarbons.

• Journal of Microbiology and Biotechnology
• /
• 제30권6호
• /
• pp.868-877
• /
• 2020

Bicarbonate has been considered as a better approach for supplying CO₂ to microalgae cells microenvironments than gas bubbling owing to cost-effectiveness and easy operation. However, the β-carotene production was too low in Dunaliella salina cultivated with bicarbonate in previous studies. Also, the difference in photosynthetic efficiency between these two carbon sources (bicarbonate and CO₂) has seldom been discussed. In this study, the culture conditions, including NaHCO₃, Ca²⁺, Mg²⁺ and microelement concentrations, were optimized when bicarbonate was used as carbon source. Under optimized condition, a maximum biomass concentration of 0.71 g/l and corresponding β-carotene content of 4.76% were obtained, with β-carotene yield of 32.0 mg/l, much higher than previous studies with NaHCO₃. Finally, these optimized conditions with bicarbonate were compared with CO₂ bubbling by online monitoring. There was a notable difference in F_v/F_m value between cultivations with bicarbonate and CO₂, but there was no difference in the F_v/F_m periodic changing patterns. This indicates that the high concentration of NaHCO₃ used in this study served as a stress factor for β-carotene accumulation, although high productivity of biomass was still obtained.

• 청정기술
• /
• 제26권1호
• /
• pp.79-87
• /
• 2020

The bio-oil produced from the fast pyrolysis of lignocellulosic biomass contains a high amount of oxygenates, causing variation in the properties of bio-oil, such as instability, high acidity, and low heating value, reducing the quality of the bio-oil. Consequently, an upgrading process should be recommended ensuring that these bio-oils are widely used as fuel sources. Catalytic fast pyrolysis has attracted a great deal of attention as a promising method for producing upgraded bio-oil from biomass feedstock. In this study, the fast pyrolysis of tulip tree was performed in a bubbling fluidized-bed reactor under different reaction temperatures, with and without catalysts, to investigate the effects of pyrolysis temperature and catalysts on product yield and bio-oil quality. The system used silica sand, ferric oxides (Fe₂O₃ and Fe₃O₄), and H-ZSM-5 as the fluidized-bed material and nitrogen as the fluidizing medium. The liquid yield reached the highest value of 49.96 wt% at 450 ℃, using Fe₂O₃ catalyst, compared to 48.45 wt% for H-ZSM-5, 47.57 wt% for Fe₃O₄ and 49.03 wt% with sand. Catalysts rejected oxygen mostly as water and produced a lower amount of CO and CO₂, but a higher amount of H₂ and hydrocarbon gases. The catalytic fast pyrolysis showed a high ratio of H₂/CO than sand as a bed material.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.567-570
• /
• 2008

내경 0.109 m의 유동층에서 다입자경 모래에 대한 압력요동의 표준편차와 유속간의 선형회귀분석을 이용한 최소유동화속도 측정법의 적용성을 조사하였다. 다입자경 모래를 평균입자크기가 같은 Gaussian 분포에서 입자분포의 표준편차에 따른 최소유동화속도를 측정하고, 측정치를 타 연구자들의 식과 비교 검토하였다. 압력요동의 표준편차 값 선형회귀분석법과 층내 압력강하로부터 구한 최소유동화속도를 구하였다. 최소유동화속도 결정에서 유속 범위는 혼합도가 낮은 유속범위와 free bubbling 영역 이상을 제외한 범위값 이어야 하며, 이 유속범위에서 측정위치는 혼합이 양호한 층 중앙이 가장 적절하다.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.157-168
• /
• 1994

APCVD에 의한 $SnO_2(:F)$ 박막 형성시 HF와 $H_2O$량의 변화에 따른 증착 조건이 전기적, 광학적 특성 그리고 textured $SnO_2(:F)$ 박막의 표면형상에 미치는 영향을 관찰하였다. HF의 bubbling량이 0.9 slm 이상일 경우에는 전자농도(electron concentration)가 $3{\Times}10^{20}/cm^3$에 도달 하였으며, 비저항값은 $7{\Times}10^4~9{\Times}10^4{Omega}cm$ 범위이었고, mobility 값은 $18~25 cm^{-2}/V.sec$이었다. 결정 grain의 형태는$H_2O$를 첨가시키지 않으며 증착시킨 경우 끝이 뾰족한 예각을 가진 pyramid 형태였으며, $H_2O$를 첨가시키며 증착시킨 경우에는 끝이 둥근 hemispherical 형이었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.58-67
• /
• 1996

This paper describes some computational results of various energy and environmental systems using Patankar's SIMPLE method. The specific topics handled in this study are jet bubbling reactor for flue gas desulfurization, cyclone-type afterburner for incineration, 200m tall stack for 500 MW electric power generation, double skin and heat storage systems of building energy saving for the utilization of solar heating, finally turbulent combustion systems with liquid droplet or pulverized coal particle. A control-volume based finite-difference method with the power-law scheme is employed for discretization. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, that is, SIMPLEC. Reynolds stresses are closed using the standard $k-{\varepsilon}$ and RNG $k-{\varepsilon}$ models. Two-phase turbulent combustion of liquid drop or pulverized coal particle is modeled using locally-homogeneous, gas-phase, eddy breakup model. However simple approximate models are incorporated for the modeling of the second phase slip and retardation of ignition without consideration of any detailed particle behavior. Some important results are presented and discussed in a brief note. Especially, in order to make uniform exit flow for the jet bubbling reactor, a well-designed structure of distributor is needed. Further, the aspect ratio in the double skin system appears to be one of important factors to give rise to the visible change of the induced air flow rate. The computational tool employed in this study, in general, appears as a viable method for the design of various engineering system of interest.

• 청정기술
• /
• 제24권1호
• /
• pp.63-69
• /
• 2018

순산소 연소 기술 중 $CO_2$ 회수 비용 절감 효과가 가장 우수한 케미컬루핑연소(chemical looping combustion, CLC) 기술의 핵심인 산소전달입자의 선정을 위해 환원반응 특성 및 물리화학적 특성에 대한 연구를 진행하였다. 세 종류의 산소전달입자(SDN70, N018-R2, N016-R4)를 대상으로 기포유동층 반응기에서 환원반응기체의 농도 및 환원 반응 온도 변화에 따른 산소전달입자의 연료전화율(fuel conversion)과 $CO_2$ 선택도($CO_2$ selectivity)를 측정 및 비교 분석하였다. 또한 산소전달입자의 마모손실 정도 및 입자의 표면 특성을 분석하기 위해 내마모도(Attrition Index, AI) 및 BET surface area를 측정하였다. 결과적으로 세 종류의 산소전달입자 모두 케미컬루핑연소 시스템에 활용하기 적합함을 확인하였으며, 가장 우수한 입자는 N016-R4로 판단되었다.