• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1248-1255
• /
• 2003

High-speed QPSK demodulator has been one important design objective of any wireless communication systems, especially those offering broadband multimedia service. This paper describes Zero-Crossing IF-level(ZCIF) QPSK demodulator for high-speed wireless communications, and its hardware structures are discussed. ZCIF QPSK demodulator is mainly composed of symbol time circuit and carrier recovery circuit to estimate timing and phase-offsets. There are various schemes. Among them, we use Gardner algorithm and Decision-Directed carrier recovery algorithm which is most efficient scheme to warrant the fast acquisition and tracking to fabricate FPGA chip. The testing results of the implemented onto CPLD-FLEX10K chip show demodulation speed is reached up to 2.6［Mbps］. Actually in case of designing by ASIC, its speed may be faster than CPLD by 5 times. Therefore, it is possible to fabricate the ZCIF QPSK demodulator with speed of 10 Mbps.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.219-222
• /
• 2007

In this paper, we have designed microstrip antenna of 800[MHz] band. It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band. we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had L-shaped feeding structure at a rectangular patch and added the parallel L-slot that used a duplex resonance effect. Also for the improvement of profit the stack with the perpendicular. Designed frequency bandwith(VSWR 2:1) of the antenna showed good characteristic of 789${\sim}$1046[MHz] to 292[MHz](36%). Also the E-plan and H-plan all profit 6.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan $44.7^{\circ} and H-plan $61.8^{\circ} to be improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.509-516
• /
• 1999

In this paper, it is designed a microstrip U-slotted patch antenna with double resonances to enhance the bandwidth. In the design of an U-slotted patch antenna, there are considered the input impedance, the width of patch, the total length of the slot, the height of foam, the position of the probe and the radius of feed pin. The broadband behavior of antenna can be obtained by adjusting the length and width of the slot. The radiation from the antenna is linear polarized with the E-paine parallel to the vertical slots and the H plane parallel to horizontal slot. The radiation pattern, impedance locus, and VSWR of the antenna are calculated using "ENSEMBLE" software, and compared with the experimental results. Experimental results show that the bandwidth for VSWR $\le$ 2:1 is about 28.6%, a directivity 14.18dBi at 6.040GHz. 6.040GHz.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.1-6
• /
• 2017

This paper presents the design of a frequency measurement device using ADC, EP2AGX FPGA and STM32 processor to accurately measure the frequency of a broadband high frequency signal. The ADC device used in this paper has a sampling frequency of 250 MSPS and a processing frequency bandwidth of 100 MHz. Due to its high sampling frequency, it is difficult to process in ordinary computers or processors, so we implemented the frequency measurement algorithm using the Altra EP2AGX FPGA. The measured frequency is sent to the direction detection controller in real time and fused with the phase signal to calculate the incident azimuth angle of the high frequency signal. The designed frequency measurement device is about 0.2 Mhz in frequency measurement error and 30% less than Anaren DFD-x, which is considered to contribute greatly to the design of radio monitoring and direction detection device.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.144-149
• /
• 2017

In this paper, we developed an intelligent and wideband RF-receiver module to represent a high dynamic range and good linearity characteristics up to 650MHz-2700MHz frequency band. and implemented an intelligent digital-RF- distorted signal measuring system for the RF distortion (intermodulation) signals. Broadband RF-receive module was designed to represent the optimized linear parameters of the receiver to meet the low noise and wide dynamic range. The designed intelligent digital-distortion(intermodulation) signal measument system measured by applying the 1MHz IF of third intermodulation signal of DUT and Measured data was recorded by program on the PC monitor with GUI interface. By variable up to 650MHz-2700MHz measured data showed up to -127.8dBc to -138dBc of the distortion (intermodulation) signal. And developed intelligent digital- distortion signal measurement system can be used to measure intermodulation distortion signal of wireless system widely.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.271-273
• /
• 2003

최근에 전력선통신(PLC: power line communication)에 관한 연구 및 개발이 활성화되고 있는 가운데, 정부에서는 전력선통신을 위한 전송채널의 주파수허용범위를 기존의 협대역인 450kHz에서 광대역인 30MHz로 확대할 계획이다. 현재, PLC 시스템에서는 대용량정보를 고속으로 전송하기 위한 고속 PLC기술의 개발이 활발히 진행되어지고 있으며, 이러한 통신시스템 기술의 구현을 위해서는 새롭게 확대될 30MHz대역에서의 전력선채널의 분석이 무엇보다도 중요한 해결 과제라고 할 수가 있을 것이다. 전력선은 각종 전기기기와 가전제품 및 사무기기로부터 발생되는 잡음들이 직접 유입되며, 또한 부하가 전력선에 연결되는 시간과 공간에 따라 전송 특성이 수시로 가변하는 특성을 가진다. 이와 같은 열악한 전력선통신채널 환경을 극복하고 통신의 에러극복능력을 향상시키기 위해서는 기존의 협대역 채널모델을 그대로 적용하기에는 부적합한 면이 많으므로, 새롭게 허용될 광대역 주파수를 갖는 전력선 채널에 대한 모델링기법이 요구된다. 따라서, 새롭게 인가될 광대역 채널을 위한 효율적인 전력선통신시스템을 개발하기 위해서는 전력선채널의 리모델링에 근거한 다양하고 실험적인 고찰이 수반되어야 하리라고 판단된다. 그러므로, 본 논문에서는 Mixture 잡음 모델링기법을 이용하여, 부하변동 및 가변적인 잡음 특성을 가진 전력선채널모델을 새롭게 분석하였다. 또한, 새롭게 분석한 전력선채널모델에 관한 수식을 직교 코드에 의한 다중접속 통신 기술인 CDMA 방식에 적용하여 비트 에러율을 유도해 봄으로써 그 유효성을 확인하였다.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.877-887
• /
• 2015

This paper is a first-hand summary on our comprehensive live trial of cellular-assisted device-to-device (D2D) communications currently being ratified by the standards community for next-generation mobile broadband networks. In our test implementation, we employ a full-featured 3GPP LTE network deployment and augment it with all necessary support to provide realtime D2D connectivity over emerging Wi-Fi-Direct (WFD) technology. As a result, our LTE-assisted WFD D2D system enjoys the required flexibility while meeting the existing standards in every feasible detail. Further, this paper provides an account on the extensive measurement campaign conducted with our implementation. The resulting real-world measurements from this campaign quantify the numerical effects of D2D functionality on the resultant system performance. Consequently, they shed light on the general applicability of LTE-assisted WFD solutions and associated operational ranges.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.199-204
• /
• 2013

Marine data communications still look for a novel data communication system at sea because of the restriction of bandwidths and costs of current carriers. In order to make the most efficient use of the broadband land carriers at sea, this paper proposes a routing scheme (MCS-NTC) at a marine MANET model. The routing scheme optimizes the route by choosing optimal nodes and carriers among the traditional and land carriers based on normalized transmission characteristics of applications and carriers. The performance is compared with the max-win method (OMH-MW) scheme considering the specific values of transmission characteristics. The result shows that our scheme derives more efficient routes than the previous one in terms of the transmission characteristics such as bandwidth, cost, delay, the number of hops and carriers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.851-860
• /
• 2013

To overcome a scarcity of radio resources to mobile broadband service, the usage of TV white space gains much attraction around the world. This paper carries out an interference analysis either by performing realistic experiments or by executing statistical Monte-Carlo simulation to exploit interference probability. The results obtained from experiments are compared to those from simulations in order to clarify the coexistence of utilization of TV band devices (TVBD) in indoor circumstances. Along the execution of our experiment in the presence of DTV receiver, we apply to a variety of transmission parameters proposed in FCC for TVBD. According to experimental and simulation works, the allowable transmission powers of TVBD systems are exploited for the plausible which are coexist on the first as well as the second adjacent frequency bands. Throughout results, it can conclude that TVBD systems can be coexisted via achieving proper transmission powers depending on the locations of themselves without showing harmful interference to DTV reception.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.761-767
• /
• 2012

In this paper, a novel ultra-wideband planar monopole antenna for the UHF communications and Digital-TV reception is proposed. The proposed antenna fed by a coplanar waveguide(CPW) is based on a triangular patch that has a broadband characteristic. To further increase the bandwidth of the triangular patch antenna, the top side of the regular triangular patch is loaded with a notch cut and each oblique side with a step. In addition, a slope is given to the ground plane of the CPW structure. Experimental results show that the -10 dB return loss bandwidth of the proposed antenna is 2,320 MHz from 480~2,800 MHz(5.83:1 bandwidth), which covers all the frequency bands of the various wireless communication systems and Digital TV broadcasting in the UHF band. Within the entire operating frequency range, the measured antenna gain in y-z plane(E-plane) varies from 3.01 to 4.71 dBi.