• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.17-24
• /
• 1997

Broad-band RAM's (Radar absorbing materials) are designed by multi-layered lossy dielectrics. The depth, the relative permittivity and the loss tangent of each layer are optimized in order to meet the required reflective power over the specified frequency range using a genetic algorithm. The reflection coefficients are calculated by the continued fraction method. A new population model of the partial initialization method during iterations is applied for the multi-modal functions to enhance the performance of the genetic algorithm. The optimal RAN's are designed by setting the relative permittivity and the loss tangent of the dielectrics as a funtion of the frequency over 5~20GHz.

• Journal of the Korean Professional Engineers Association
• /
• v.24 no.1
• /
• pp.95-103
• /
• 1991

The communication transmission engineering plays the most important role in electrical communications engineering. Recently, it has been making remarkable progress as an infrastructure supporting informationaged society. Specially, the start of television conference and service of high speed digital transmission can be said it is announcing a raising curtain of high speed broad band age. Together with high speed broad band service needs a capacity as much as several or several hundred times of telephone with one circuit, various kinds of service forms are anticipated to emerge, it is anticipated to give a big impact to the way of future communications newtork. At present, telecommunication network is transforming telephone voice information by analog technology into a flexible higher system disposable of a variety of information such as pictures or data other than telephone by the introduction of digital technology. Consequently, the development of hereafter for the following respective technologies is desired.

• Journal of the Korean Professional Engineers Association
• /
• v.24 no.2
• /
• pp.127-136
• /
• 1991

The communication transmission engineering plays the most important role in electrical communications engineering. Recently, it has been making remarkable progress as an infrastructure supporting informationaged society. Specially, the start of television conference and service of high speed digital transmission can be said it is announcing a raising curtain of high speed broad band age. Together with high speed broad band service needs a capacity as much as several or several hundred times of telephone with one circuit, various kinds of service forms are anticipated to emerge, it is anticipated to give a big impact to the way of future communications network. At present, telecommunication network is transforming telephone voice information by analog technology into a flexible higher system disposable of a variety of information such as pictures or data other than telephone by the introduction of digital technology. Consequently, the development of the hereafter for the following respective technologies is desired.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.86-94
• /
• 1997

An investigation into the modal interaction of an autoparametric system under broad-band random excitation is made. The specific system examined is a spring-pendulum system with internal resonance, which is known to be a good model for a variety of engineering systems, including ship motions with nonlinear coupling between pitching and rolling motions. By means of the Gaussian closure method the dynamic moment equations explaining the random response of the system are reduced to a system of autonomous ordinanary differential equations of the first and second moments. In view of equilibrium solutions of this system and their stability we examine the system responses. The stabilizing effect of system damping is also examined.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.455-458
• /
• 2002

Design methods are presented for an X-band traveling-wave slot array realized on a rectangular waveguide. An array of 21 longitudinal slots is realized on the broad wall of a rectangular waveguide. The squint of the antenna main beam is adjusted using the element spacing and the waveguide broad wall dimension. The excitation of the array is controlled by the slot offset from the waveguide center line Multiple I-plane steps are placed around last slot elements so that the second-order beam due to tile reflected wave Is minimized A waveguide-to-coaxial adapter Is designed for feeding the array antenna from a coaxial system. Results of the design show an outstanding performance of the antenna 17.1 dB gain. 36"beam 1111, and -21 dB maximum sidelobe level.evel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.58-64
• /
• 2001

A microstrip patch antenna with B-WLL applications is designed and manufactured. To make a array antenna the size of patch antenna was miniaturized. A broad band is obtained by two additional parasitic elements, which are closely located to the main patch. The bandwidth of the manufactured antenna is 15% at the center frequency of 26.8 GHz. Radiation patterns are measured over a wide bandwidth.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.83-89
• /
• 2019

In this paper, beam forming using moving least squares method (MLSM) is studied. In the previous research, the least squares method (LSM), one of the data interpolation methods, was used to determine the desired beam pattern and obtain a beam pattern that minimizes the square of the error with the desired beam pattern. However, LSM has a disadvantage in that the beam pattern can not be formed to satisfy the exact steering angle of the desired beam pattern and the peak sidelobe level (PSLL) condition. To overcome this drawback, MLSM is used for beam forming. In order to verify, the proposed method is applied in beam forming of Bezier platform array antenna which is one of conformal array antenna platform.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.99-105
• /
• 2019

In this paper, we describe the procedure of simulation design and measured results of a compact planar antenna for handset applications. The broad bandwidth covering the interested frequency band for mobile handset is achieved by introduction of an open ended L-shaped slot which is newly proposed and corresponds to the monopole slot. In order to minimize the impact on circuit part placement, the proposed antenna is placed on the ground plane edge of PCB with size of 60×65 mm². The measurement result for 10dB impedance bandwidths is 640 MHz (1.7~2.34 GHz), covering the required bandwidths for DCS (Digital Cellular System)-1800 (1710 ~ 1880 MHz) / IMT (International Mobile Telecommunication)-2000 (1885 ~ 2200 MHz) bands. In particular, we would like to emphasize the proposed antenna has an omnidirectional radiation pattern suitable for commercial wireless communication.

• Journal of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.317-324
• /
• 1975

The adsorptions of gaseous $H_2O\;and\;D_2O\;on\;Na^+-,\;Ca^{2+}-,\;and\;Al^{3+}$ montmorillonites at various temperatures were undertaken. Break down of ir hydroxyl stretching bands into four Gaussian components was made by means of manual technique. Resonance theory of water to form silanol hydroxyl group was supported by $3625cm^{-1}$ band for OH and $2680cm^{-1}$ band for OD which depend on amounts of water adsorbed. The broad bands at about $3400 cm^{-1}\;and\;2475cm^{-1}$ were assigned to stretching band of silanol OH hydrogen bonded to adsorbed water. The prominent $3230 cm^{-1}$ band together with component around $2345 cm^{-1}$ were attributed to adsorbed $H_2O\;and\;D_2O$ respectively. The chemical nature of the hydrogen bonding between adsorbed water and neighboring surface OH was explained adequately in terms of electrostatic interaction.

• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.163-167
• /
• 1986

During the germination of mungbean seeds, the changes of water contents, total and soluble proteins, and electrophoretic pattern of the soluble proteins were examined. The moisture content of a dry mungbean was 12.7%, which was greatly increased after the soaking. Along to the germination period, the moisture contentof the mungbean sprouts was gradually increased up to 90.7%. The contents of total and soluble proteins were sharply decreased after the soaking of the mungbean and decreased gradually during the germination. PAGE of the soluble proteins showed two broad bands and three sharp bands. During the germination, two broad bands were weadened but other bands were relatively stable. SDS-PAGE showed 19 discrete bands and during the germination, the most of the bands were thinned or disappeared. But some of the protein bands were stable until the end of germination.