• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.152-161
• /
• 1994

Most widened bridges have been constructed by the joining-construction method that makes new and existing bridges structurally a single structure. Since the joining-construction method has several problems in design and construction viewpoint, this study is conducted in order to investigate the structural behaviors of RC slabs, which are widened and influenced by traffic-induced vibration of existing bridge during placing and curing of new concrete, with the prototype flexural strength test and FEM analysis. It was found that cracks are generated in construction joint at low applied load and that stress concentration at the joints and slips between steel bar and concrete are occured. But, the decreasing of load carrying capacity is negligible according to the traffic-induced vibration as well as the difference of construction method.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.2
• /
• pp.365-373
• /
• 2002

In this paper, the system reliability concept was presented to predict the lifespan of bridges. Lifetime distribution functions (survivor functions) were used to model real bridges to predict their remaining life. Using the system reliability concept and lifetime distribution functions (survivor functions), a program called LIFETIME was developed. The survivor functions give the reliability of component at time t. The program was applied to an existing Colorado state highway bridge to predict the failure probability of the time-dependent system. The bridge was modeled as a system, with failure probability computed using time-dependent deteriorating models.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.98-106
• /
• 2006

The substructure of temporary bridges used during the construction period of main bridges needs to be simple and strong at the same time so that it doesn't block running water. When the water flow is hindered by sub-structure of the bridges, as it happens when H beams with bracing are used, either the water floods or the bridge gets damaged. Therefore, using round beams for the substructure and connect them together is a preventive choice considering the intensive raining in the summer. The bridges using round beams for the substructure have also benefited by fast construction because of fewer bracing and in-situ welding. Because the round-pile-connecting method is relatively new, the safety evaluation of the constructed bridge is an essential procedure before being used in the field. The field evaluation of a bridge including the vehicle loading test and moving load analysis has been conducted and the results showed the safety requirement is satisfied.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.203-210
• /
• 1995

A construction method for continuous prestressed Composite Bridges(PCB's) is developed and successfully applied to the design of two-span continuous PCB's of five different span lengths. The construction of continuous PCB's goes through 17 different loading conditions. for each loading condition, the allowable stress design method is used to determine section properties. The analytical results of two-span continuous PCB's arc compared with those of simple PCB's. The comparison shows that the use of the proposed method can reduce 10-15 percents of the concrete section area and approximate 28 percents of the steel section area, as well as 5-8 percents of the girder height. The study indicates that the use of the proposed PCB's method can significantly reduce construction and maintenance costs of bridges.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.443-452
• /
• 2002

Construction of highway bridges is almost complete in many countries. Thus, the government and highway agencies are shifting their remaining life span from the viewpoint of system reliability. As such, it is necessary to develop maintenance models based on system reliability concept. In this paper, preventive and essential maintenance models were developed using system reliability and lifetime distribution.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.5 s.60
• /
• pp.627-639
• /
• 2002

Bridge construction is almost complete in many countries. Thus, the government and highway agencies change their focus from constructing to maintaining. Effectively maintaining bridges require predicting their lifespan using a system reliability viewpoint. Likewise, maintenance models based on the system reliability concept should be developed. Thus, this study developed maintenance models for preventive maintenance and essential maintenance using system reliability and lifetime distributions. The optimal maintenance strategy for an existing bridge was obtained using the developed maintenance models.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.2
• /
• pp.103-111
• /
• 2002

The objective of this study is to collect and classify bridge failures that occurred in domestic from 1974 through 2001 and to draw the engineering informations by analyzing the principal causes and the trends of the bridge failures. Total 45 failures of bridge were obtained and analyzed based on the factors such as time of failures, modes of failures, classification of materials of failed elements, types of failed elements, distribution of failure cases with respect to the highway grades. The critical problems of bridge failures are associated with the construction deficiencies, external causes, maintenance deficiencies, and design deficiencies. Since the study of failures in bridges would enhance the design and construction of safe bridges in the future, it would be needed to create data bases at the national level and to alter the related codes with identifying potential deficiencies from past failures data.

• Structural Engineering and Mechanics
• /
• v.42 no.1
• /
• pp.55-72
• /
• 2012

Precast-cast insitu concrete bridge construction is widely practiced for small to medium span structures. These bridges consist of precast pre-stressed concrete beams of various cross-sections with a cast in-situ reinforced concrete slab. The connection between the beams and the slab is via shear links often included during the manufacturing process of the beams. This form of construction is attractive as it provides for standardisation, reduced formwork and construction time. The assessment of the integrity of shear connectors in existing bridges is a major challenge. A procedure for assessment of shear connectors based on vibration testing and finite element model updating is proposed. The technique is applied successfully to a scaled model bridge model and an existing bridge structure.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1990.10a
• /
• pp.105-110
• /
• 1990

Effective maintenance system for national highway bridges has been requested due to increasing numbers of bridges. In this study, bridge data base is established in accordance with rating criteria for the structural conditions and functions of bridges. Maintenance system using PC-80386 hardware and ORACLE software is developed to rank the priority of either reconstruction or repairing of bridges and to provide with those information to bridge maintenance staff in order to perform bridge maintenance effectively. With this pre-establised data base and computerized maintenance system, data and information for planning of bridge construction could be obtained in times.

• Journal of the Korean Society of Safety
• /
• v.18 no.1
• /
• pp.94-100
• /
• 2003

Generally, cable-stayed bridges are both statically indeterminate structure with a high degree of redundancy and flexible structure. So it is very important to ensure precision control during both fabrication and construction. In precision control of cable-stayed bridges, precision control under multi-objective programming method is needed, because precision control problem of cable-stayed bridges is a multi-objective programming problem in which many objective functions are regard as variables. In previous studies, it was regarded as a single-objective problem, so it had many problems in respect of usefulness and rationalness. In this study, precision control under multi-objective programming method is proposed considering economy, efficiency, and safety at best in precision control of cable-stayed bridges. Precision control problem of cable-stayed bridges is formulated with satisfying trade-off method which is a kind of multi-objective programming method, then it is optimized with min-max method. A computer program is presented including above process.