• Structural Engineering and Mechanics
• /
• 제76권1호
• /
• pp.1-15
• /
• 2020

The aim of this paper is to simply present live load factor calculation methodology formulation with the addition of a simple new future load projection procedure to previously proposed two methods. For this purpose, Oregon Weigh-in-Motion (WIM) data were used to calculate live load factors by using WIM data. These factors were calculated with two different approaches and by presenting new simple modifications in these methods. A very simple future load projection method is presented in this paper. Using four different WIM sites with different average daily truck traffic (ADTT) volume, and all year data, live load factors were obtained. The live load factors, were proposed as a function of ADTT. ADTT values of these sites correspond to three different levels which are approximately ADTT= 5,000, ADTT = 1,500 and ADTT ≤ 500 cases. WIM data for a full year were used from each site in the calibration procedure. Load effects were projected into the future for the different span lengths considering five-year evaluation period and seventy-five-years design life. The live load factor for ADTT=5,000, AASHTO HS20 loading case and five-year evaluation period was obtained as 1.8. In the second approach, the methodology established in the Manual for Bridge Evaluation (MBE) was used to calibrate the live load factors. It was obtained that the calculated live load factors were smaller than those in the MBE specifications, and smaller than those used in the initial calibration which did not convert to the gross vehicle weight (GVW) into truck type 3S2 defined by AASHTO equivalents.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.300-307
• /
• 2009

In this paper, design and control is proposed for a four input-series-output-series-connected ZVS full bridge converter for the photovoltaic power conditioning system (PCS). The novel topology for a photovoltaic (PV) DC/DC converter that can dramatically reduce the power rating and increase the efficiency of a PV system by analyzing PV module characteristics is proposed. The control scheme, including an input voltage controller is proposed to achieve equal sharing of the input voltage as well output voltages by a four series connected module. Design methods for ZVS power stage are also introduced. The total PV system is implemented for a 250-kW PV power conditioning system (PCS). This system has only three DC/DC converters with a 25-kW power rating and uses only one-third of the total PV PCS power. The 25-kW prototype PV DC/DC converter is introduced to verify experimentally the proposed topology. In addition, an experimental result shows that the proposed topology exhibits good performance.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.478-487
• /
• 2014

This study presents a new interleaved three-level zero-voltage switching (ZVS) converter for high-voltage and high-current applications. Two circuit cells are operated with interleaved pulse-width modulation in the proposed converter to reduce the current ripple at the input and output sides, as well as to decrease the current rating of output inductors for high-load-current applications. Each circuit cell includes one half-bridge converter and one three-level converter at the primary side. At the secondary side, the transformer windings of two converters are connected in series to reduce the size of the output inductor or switching current in the output capacitor. Based on the three-level circuit topology, the voltage stress of power switches is clamped at $V_{in}/2$. Thus, MOSFETs with 500 V voltage rating can be used at 800 V input voltage converters. The output capacitance of the power switch and the leakage inductance (or external inductance) are resonant at the transition interval. Therefore, power switches can be turned on under ZVS. Finally, experiments verify the effectiveness of the proposed converter.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1190-1199
• /
• 2015

This paper presents a new resonant converter to achieve the soft switching of power devices. Two full-bridge converters are connected in series to clamp the voltage stress of power switches at V_in/2. Thus, power MOSFETs with a 500V voltage rating can be used for 800V input voltage applications. Two flying capacitors are connected on the AC side of the two full-bridge converters to automatically balance the two split input capacitor voltages in every switching cycle. Two resonant tanks are used in the proposed converter to share the load current and to reduce the current stress of the passive and active components. If the switching frequency is less than the series resonant frequency of the resonant tanks, the power MOSFETs can be turned on under zero voltage switching, and the rectifier diodes can be turned off under zero current switching. The switching losses on the power MOSFETs are reduced and the reverse recovery loss is improved. Experiments with a 1.5kW prototype are provided to demonstrate the performance of the proposed converter.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.197-211
• /
• 2007

노후화된 PSC Beam 교량은 개선된 보강방안이 필요하다. 본 연구에서는 성능저하가 발생된 노후 PSC Beam 교량을 대상으로 PSC Beam 교량의 보강형을 폐단면 박스형태로 변환하여 이차합성 구조화함으로써, PSC Beam 교량의 강성을 안정적으로 증가시킬 수 있는 박스형 보강방안을 제안하였다. 제안된 보강방안과 기존의 외부프리스트레스 도입공법을 결합하여 보강할 경우, 보강효과를 정량적으로 규명하기 위해 시공단계해석에 따른 시간 의존적 정밀해석을 수행하였다. 성능개선을 위해 제안된 박스형 보강방안 적용 시 보강방법에 따라 전단면 및 휨 보강과 같은 다양한 형태의 보강방안을 제시한 후, 각각의 보강방안에 대해 이차합성 효과에 따른 상향캠버 및 부재응력 특성을 평가하였다. 또한 내하력 평가를 수행하여 내하율을 검토함으로서, 개선된 PSC Beam 교량의 구조 안전성을 정량적으로 평가하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.422-427
• /
• 2014

In this paper, simple LED driver is proposed. The proposed driver has simple construction having series capacitor, bridge rectifier, and adjustable regulator IC. Constant current control is possible with the use of TL431Z. The proposed in this paper, current is greater than the rating of the load, the current controller device measures the increased current in the circuit, and turned-on so that the current will be shared. Thus current control device makes the circuit more reliable, longevity as well as increase the luminous efficacy of the LED light. The simulation and experimental results are presented to show the validity of the proposed circuits.

• 한국안전학회지
• /
• 제8권1호
• /
• pp.47-53
• /
• 1993

Residual Deformation Analysis(RDA) is a new method for ratings of the continuous bridges. The RDA makes it possible to expand the inelastic steel girder bridge design method set forth in the American Association of State Highway Officals'(AASHTO) Guide Specifications for Alternate Load Factor Design Procedures for Steel Beam Bridges Using Braced Compact Sections(1986) into an inelastic rating method. It is a method to assess the residual moments and deformations that are set up in a beam that has been loaded into the post-elastic range This method combines classical elastic conjugate beam theory with linear moment-rotation relationships for midspan inelastic positive moment. The limit state is inelastic serviceability limit. which is defined as the ratio of the span to midspan inelastic deflection(C=L/D).

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.761-765
• /
• 2006

At present, harmonic currents cause serious problems in power conversion system using the semiconductor switching device. Also some of the conversion system provokes harmonic currents against to the main power supply system and causes hindrances for the system. Main power impedance of the traditional LC passive filter method, influences on the filter characteristics and amplifies the harmonics when resonance phenomenon is occurred. And the traditional existing 2 level inverter systems show the limit in capacity of voltage and current in case of occurring sudden load change. So, to solve this problem active filter which uses cascaded H-bridge multi level inverter has been designed and ex-filter system circuits were totally investigated. With multi level active filtering system not only the size of filter but also the size of filter for transformer can be reduced by half and so as to the weight, while the capacity of inverter can be double sized and wave forms can be compensated exactly and precisely. Also by the benefit of the increase in rating capacity, the various currents owing to the load fluctuation can be dealt more steadily. In order to simulate the wave form of harmonics based on the measured data on the AC 25kV high speed Domestic Commercial railway, it was simulated with PSCAD/EMTDC and PSIM. Based on the results of this demonstration, the power supply system and inverter system would be more stable and also promoting its efficiency.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.93-101
• /
• 2022

국내 RC 슬래브교의 경우 공용연수가 20년 이상인 교량이 전체의 70% 이상을 차지하며, 노후화된 구조물의 수가 증가함에 따라 구조물의 안전 진단 및 유지관리의 중요성이 증가하는 실정이다. 고속도로 교량의 경우 바닥판 균열은 열화현상의 우선적인 원인이 되며, 교량 내구성 및 사용수명 저하에 밀접한 관계가 있다. 또한 신축이음과 교량받침 등의 부재 손상으로 인한 손상 발생 비율이 약 73%로 주부재보다 높다. 따라서 본 연구에서 교량 부재 손상과 바닥판 열화가 결합된 손상 시나리오를 정의하였다. 설계하중으로는 일교차를 고려한 온도 증감과 차랑햐중을 고려하여 개별 단일 손상 및 이종손상 시나리오 발생 시 바닥판 응력 분포와 최대 응력 발생 지점을 비교 분석하였다. 또한 바닥판 열화의 주요한 원인이 되는 균열의 점검 및 진단이력데이터 기반으로 공용연수 별 손상 시나리오에 대한 손상확산 분석 및 상태등급 예측을 수행하였다. 교량부재 손상이 동반되어 발생하는 이종손상의 경우 단일손상 대비 균열 면적율과 손상확산율이 증가되며, 상태등급 C에 도달하는 시기도 매우 빠를 것으로 예측된다. 따라서 교량부재 손상이 발생하였을 때, 신속한 보수 및 교체가 이루어지지 않으면 바닥판의 손상 발생과 손상 확산으로 인한 2차 피해를 유발하는 원인이 될 수 있다. 따라서 바닥판 응답에 대한 지속적인 관찰과 대응이 필요할 것으로 판단된다.

• 한국강구조학회 논문집
• /
• 제11권2호통권39호
• /
• pp.213-222
• /
• 1999

ALFD방법은 연속합성판형교의 과재하중과 최대하중에 대한 강도검토에 있어서 실제적인 거동을 나타낼 수 있는 탄소성해석법이다. 주어진 하중으로 인한 최대 정, 부모멘트단면에서의 항복은 활하중이 통과한 후에 잔류하는 소성회전을 일으킨다. 또한 제조시의 잔류응력으로 인하여 이론적인 항복모멘트 이하에서도 소성변형을 일으킨다. 이러한 국부항복은 다음에 작용되는 과재하중하에서 탄성화되어 정의 자생모멘트를 유발한다. 본 연구에서는 지점과 최대 정모멘트 단면에서의 단위소성회전각으로 인한 자생모멘트를 공액보법과 3연모멘트법에 의하여 구하였고, 9개의 설계경간을 지점단면을 감소시켜가면서 본 연구에서 개발한 전산프로그램에 의하여 연속관계와 모멘트-비탄성회전각 실험곡선과 일치하는 자생모멘트를 구하였다. 또한 한국도로교시방서에 준하여 비조밀단면을 갖는 3경간 연속합성판형교의 평가를 수행하였다.