• 전산구조공학
• /
• 제12권4호
• /
• pp.69-69
• /
• 1999

Design of Dangsan Steel Railway Bridge(a part of Seoul Subway Line NO. 2), which is supposed to be replaced after its 15years survice, was done, and the reconstruction has begun in Dec. 1997. The design include new superstruc-ture and bridge piers, retrofitting of the foun-dation, rail system, electric and signal, etc. In this paper, design of the structure is mainly summarized. The main span superstructure, across Han river, is composite section which is com-posed of steel box and reinforced concrete deck slab with 9 span continuous. The superstructure for the approaches is bottom througth type 2-cell steel box girder with steel floor system and concrete deck slab with 3 or 4 span continuous. The bridge piers was planned to be reconstructed based upon the result from the various investi-gations, while the foundation(cassion and pile foundation) was planned to be retrofitted. For superstructure erection, the method of combination of barge bent and heavy lifting and the launching truss method was investigated for the main span and approach spans, respectively.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.195-202
• /
• 2004

After the 1990's, Guss asphalt has chosen in Korea for using in pavement of a steel deck bridge because of it's distinguish ability about water proof and so on. But on the other hand it may cause server stress and displacement on the bridge as it is treated using very high temperature ranging from 220℃ to 260℃. Therefore it is critical to estimate the thermal effect of Guss asphalt on the steel deck bridge before the width and pattern of the unit portion are decided to minimize impact. In this study, a serious of numerical tests of the some steel box bridges were idealized were conducted to verify the feasibility of numerical value analysis. The parametric study was performed to present design proposal about the Box section dimensions and the diaphragm spacing.

• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.657-665
• /
• 2011

프리캐스트 콘크리트 페널의 일종인 LB-DECK은 콘크리트 교량 바닥판의 시공시 LB-DECK 위에 현장타설되는 콘크리트와 합성 거동하는 영구 콘크리트 거푸집이다. 현행 LB-DECK은 두께가 60 mm인 콘크리트 슬래브와 슬래브 내부에 높이 125 mm인 lattice-girder들의 일부가 매립되어 있는 구조이다. 이러한 LB-DECK은 시공하중에 의해 종방향 균열이 발생하지 않도록 거더 간격이 충분히 작은 교량 바닥판 시공시 주로 적용되고 있다. 이 논문에서는 최근 강박스 교량과 같이 교량 바닥판의 지간장이 긴 교량에 LB-DECK를 적용할 경우 콘크리트 하부에 발생될 수 있는 종방향 균열을 최소화시키기 위하여, LB-DECK의 균열강도를 평가하기 위한 실험적 연구를 수행하였다. LB-DECK 콘크리트 슬래브의 두께, lattice-girder의 높이, 그리고 top-bar의 지름을 변수로 하는 8종류 24개의 비합성 보부재와 4가지 종류의 합성 보부재 4개를 제작한 후 정적하중 재하실험을 수행하였다. 실험체에 대한 정적하중 재하 실험을 통해 각 실험체의 균열하중과 극한하중을 평가하였으며, 또한 최종 파괴시까지 중앙부 처짐, top-bar의 변형률, 콘크리트 슬래브의 균열 진전 양상 그리고 최종 파괴 형태를 살펴보았다. 각 실험체로부터 얻은 균열하중의 크기는 탄성해석을 통해 얻은 해석치와 비교하였다. 또한 콘크리트 건조수축이 균열강도에 미치는 영향을 파악하기 위하여 AEMM 방법을 이용한 장기 거동 해석을 수행하였다. 실험 결과를 토대로, 지간장이 긴 교량 바닥판에 LB-DECK 적용시, 균열 발생을 예방할 수 있도록 LB-DECK 콘크리트 슬래브의 균열강도와 설계상세를 검토하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.468-475
• /
• 2007

The Steel deck a structural analysis in head plate form change the objective bridge which it sells it accomplished a detailed structural analysis from the research which it sees and Bulk-head plate it accomplished. The length rib where the fatigue crack which is considerable generally occurs, width rib connection department and the length rib side, the width rib side it compares principal stress in the object and it does to sleep. It applied the grudge element model which it describes consequently after words and a load and a boundary condition and it executed it compared a static test and principal stress. It grasped the stress conduct of the The Steel deck petal which it follows in hand weaving rib affix location and the affix location to sleep in order to analyze a same location Bulk-head the head and comparison considered. From the detailed section which is reinforced with the stress investigation result hand weaving rib of the location which is weak in structural analysis result fatigue crack of form star reinforcement details basic form and Bulk-head the form which is reinforced with the head plate compared to principal stress investigation hour it is judged at the section which separates most.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.108-114
• /
• 2008

Although FRP is relatively new material for constructional use, there are several commercial GFRP bridge decks available today. In this paper we first set variables which decide the design of a GFRP deck based on commercial products. Under the assumption of linear elastic behavior under DB24 load, all the conditions of stability and serviceability are considered. We seek the best solution which minimizes the cross section area using genetic algorithm. The optimal solution shows that the shape is close to the ASSET deck with larger angle of the web and smaller area.

• 한국산학기술학회논문지
• /
• 제14권5호
• /
• pp.2474-2480
• /
• 2013

스트레스 리본 보도교는 특정한 새그을 갖는 지지 케이블에 교량 길이에 비하여 단면 두께가 아주 작은 Deck을 설치하고 프리스트레스를 도입함으로써 발생되는 긴장된 바닥판의 축력으로 외력의 대부분을 저항하는 구조물이다. 일반 구조물 설계와 달리 스트레스 리본 보도교의 설계는 Deck 단면의 가정 이외에도 지지 및 긴장 케이블량과 긴장 케이블 긴장력을 가정하여야 하기 때문에 보다 많은 반복과정이 발생한다. 본 논문에서는 이러한 반복과정을 최소한으로 줄이고자 지지 및 긴장 케이블량과 긴장력을 합리적으로 가정할 수 있는 회귀분석식이 새그비 1/30, 1/40, 그리고 1/50를 갖는 교량길이 80m에 대하여 제안되었다.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.115-134
• /
• 2003

The Ting Kau Bridge in Hong Kong is a cable-stayed bridge comprising two main spans and two side spans. The bridge deck is supported by three towers, an end pier and an abutment. Each of the three towers consists of a single reinforced concrete mast which reduces its section in steps, and it is strengthened by transverse cables and struts in the transverse vertical plane. The bridge deck is supported by four inclined planes of cables emanating from anchorages at the tower tops. In view of the threat from typhoons, the dynamic behaviour of long-span cable-supported bridges in the region is always an important consideration in their design. This paper is devoted to the ambient vibration measurements of the bridge for evaluation of dynamic characteristics including the natural frequencies and mode shapes. It also describes the modelling of the bridge. A few finite element models are developed and calibrated to match with the field data and the results of subsequent structural health monitoring of the bridge.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.77-87
• /
• 2013

국내 교량 설계에서 온도 하중에 대한 현재 LSD (한계 상태 설계법)는 다양한 교량 형식에 대한 동일한 기준을 적용하고 있다. 본 연구에서는 유효 온도를 산정하기 위해 실제 크기의 상판이 없는 강상자형거더교 시험체를 제작하였다. 1년동안 강상자형거더교모형의 18개 지점에서 온도데이터를 측정하였다. 측정된 데이터를 바탕으로 대기 온도에 따른 교량단면내 유효 온도를 산정 하였다. 유로 코드의 유효 온도와 비교할 때 실측 유효온도의 결과는 매우 유사한 상관 관계를 보였다. 따라서, 본 데이터를 기반으로 산정 된 유효 온도는 국내 교량 설계에 온도 하중에 적합한 설계 기준을 제시하기 위한 기초 자료로 사용할 수 있다.

• Wind and Structures
• /
• 제28권4호
• /
• pp.255-270
• /
• 2019

Aerodynamic configurations of bridge decks have significant effects on the aerostatic torsional divergence and flutter forsuper long-span bridges, which are onset for selection of suitable bridge decksfor those bridges. Based on a cable-stayed bridge with double main spans of 1500 m, considering typical twin-box, stiffening truss and closed-box section, which are the most commonly used form of bridge decks and assumed that the rigidity of those section is completely equivalent, are utilized to investigate the effects of aerodynamic configurations of bridge decks on aerodynamic instability performance comprised of the aerostatic torsional divergence and flutter, by means of wind tunnel tests and numerical calculations, including three-dimensional (3D) multimode flutter analysis and nonlinear aerostatic analysis. Regarding the aerostatic torsional divergence, the results obtained in this study show twin-box section is the best, closed-box section the second-best, and the stiffening truss section the worst. Regarding the flutter, the flutter stability of the twin-box section is far better than that of the stiffening truss and closed-box section. Furthermore, wind-resistance design depends on the torsional divergence for the twin-box and stiffening truss section. However, there are obvious competitive relationships between the aerostatic torsional divergence and flutter for the closed-box section. Flutter occur before aerostatic instability at initial attack angle of $+3^{\circ}$ and $0^{\circ}$, while the aerostatic torsional divergence occur before flutter at initial attack angle of $-3^{\circ}$. The twin-box section is the best in terms of both aerostatic and flutter stability among those bridge decks. Then mechanisms of aerostatic torsional divergence are revealed by tracking the cable forces synchronous with deformation of the bridge decksin the instability process. It was also found that the onset wind velocities of these bridge decks are very similar at attack angle of $-3^{\circ}$. This indicatesthat a stable triangular structure made up of the cable planes, the tower, and the bridge deck greatly improves the aerostatic stability of the structure, while the aerodynamic effects associated with the aerodynamic configurations of the bridge decks have little effects on the aerostatic stability at initial attack angle of $-3^{\circ}$. In addition, instability patterns of the bridge depend on both the initial attack angles and aerodynamic configurations of the bridge decks. This study is helpful in determining bridge decksfor super long-span bridges in future.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.371-384
• /
• 2020

The steel-concrete double composite girder in the negative flexural region combines an additional concrete slab to the steel bottom flange to prevent the local steel buckling, however, the additional concrete slab may lower down the neutral axis of the composite section, which is a sensitive factor to the tensile stress restraint on the concrete deck. This is actually of great importance to the structural rationality and durability, but has not been investigated in detail yet. In this case, a series of 5.5 m-long composite girder specimens were tested by negative bending, among which the bottom slab configuration and the longitudinal reinforcement ratio in the concrete deck were the parameters. Furthermore, an analytical study concerning about the influence of bottom concrete slab thickness on the cracking and sectional bending-carrying capacity were carried out. The test results showed that the additional concrete at the bottom improved the composite sectional bending stiffness and bending-carrying capacity, whereas its effect on the concrete crack distribution was not obvious. According to the analytical study, the additional concrete slab at the bottom with an equivalent thickness to the concrete deck slab may provide the best contributions to the improvements of crack initiation bending moment and the sectional bending-carrying capacity. This can be applied for the design practice.