• Title/Summary/Keyword: bricks

검색결과 239건 처리시간 0.023초

채움벽 두께에 따른 철근콘크리트 조적채움벽 골조의 면내하중에 대한 유한요소해석 (Finite Element Analysis of Reinforced Concrete Masonry Infilled Frames with Different Masonry Wall Thickness Subjected to In-plane Loading)

  • 김충만;유은종;김민재
    • 한국전산구조공학회논문집
    • /
    • 제29권1호
    • /
    • pp.85-93
    • /
    • 2016
  • 본 논문에서는 범용유한요소해석 프로그램인 ABAQUS를 사용하여 국내에서 사용되는 콘크리트벽돌을 조적채움벽으로 가진 철근콘크리트 골조를 대상으로 유한요소해석을 실시하였다. 해석대상은 순수골조, 채움벽의 두께가 0.5B인 골조, 두께가 1.0B인 골조의 3종류이다. 철근콘크리트 골조 및 채움벽의 재료특성은 재료시험 결과로부터 구하였으나 두께가 1.0B인 채움벽의 경우 벽돌의 쌓기방법의 차이에 의해 0.5B 두께의 실험체보다 4배 정도 증가된 인장강도를 사용하였다. 유한요소 해석결과는 실험을 통해 구한 하중-변위관계 및 변위각에 따른 균열양상을 상당히 정확하게 예측하였다. 유한요소해석 결과의 분석을 통해 조적채움벽과 골조사이의 접촉응력 및 골조의 전단력과 휨모멘트를 산정하였다.

산업부산물을 사용한 콘크리트 벽돌의 CO2 양생 후 탄산화 평가 (Carbonation Evaluation After CO2 Curing of Concrete Bricks Using Industrial by-products)

  • 문훈;이남곤;박정준;류금성;박기준;장인동
    • 한국건설순환자원학회논문집
    • /
    • 제11권4호
    • /
    • pp.373-380
    • /
    • 2023
  • 본 연구에서는 발전소에서 포집된 CO2의 활용을 위해 CO2 환경에서 양생된 콘크리트 벽돌의 탄산화를 분석하였다. 전기로 환원슬래그(ERS)와 전기로 산화슬래그를 사용하여 콘크리트 벽돌 시험체를 제작하고 20% 농도의 CO2 챔버에서 콘크리트 벽돌 시험체를 3일간 양생하여 항온항습 상태에서 양생된 시험체와 탄산화 수준을 비교하였다. 콘크리트 벽돌의 무게변화, 탄산화 깊이, 휨강도, 압축강도를 측정한 결과, CO2 환경에서 양생된 시험체는 무게의 2.4 % 수준의 CO2를 흡수하는 것으로 나타났다. ERS를 사용한 시험체가 탄산화 깊이가 가장 깊었으며, KS F 4004 콘크리트 벽돌의 규준을 만족하였다. 따라서 포집된 CO2는 콘크리트 벽돌의 CO2 양생 과정에 활용할 수 있을 것으로 기대된다.

무령왕릉보존에 있어서의 지질공학적 고찰

  • 서만철;최석원;구민호
    • 대한자원환경지질학회:학술대회논문집
    • /
    • 대한자원환경지질학회 2001년도 제17차 공동학술강연회 및 춘계학술답사
    • /
    • pp.42-63
    • /
    • 2001
  • 무령왕릉의 보존대책을 수립하기 위하여 누수 현상, 고분구조 벽체거동 상황 및 구조안전점검, 고분 내에 서식하는 조류의 제거, 고분내 습기 및 결로현상 제거를 위한 공기조화시설 등을 포함하는 종합 정밀저사를 1996년 5월 1일 부터 1997년 4월 30일 까지 1년간 수행하였다. 이러한 연구를 수행하기 위하여 기초 지반에 대한 정밀측량, 고분 내외부의 년중 온습도 모니터링, 지반의 내부물성 파악을 위한 지구물리 탐사, 시추 자료에 대한 각종 물성실험, 지반의 투수계수 측정 및 지구화학적 분석을 실시하였다. 고분 내외부에 대한 정밀측량 결과 봉분 중심의 현실 중심보다 북동쪽으로 5m 이격되어 있다. 무령왕릉의 경우는 발굴 당시에도 유사한 분포를 하였으나, 이로 인하여 불균형적인 토압을 발생시키는 원인이 되고 있다. 벽돌깨짐 상황 조사결과 무령왕릉의 조사 대상 벽돌 6025장중 1972년에는 435장 파손되었던 것이 1996년 조사결과 1072장이 파손된 것으로 밝혀져 파손율이 2.5배로 증가하였다. 6호분의 경우는 이보다 더 심하여 벽돌 파손율이 2.9배로 증가하고 있다. 1972년 상황은 약 1450년간 진행된 것이고 1996년의 상황은 불과 24년간 진행된 것임을 감안할 고분이 발굴된 이후 벽돌의 균열은 상당한 가속도로 진행되어 온것이 사실이며 이대로 진행된다면 더욱 더 가속화될 것으로 판단된다. 고분벽체의 거동상태를 계측한 결과 무령왕릉 동측벽의 경우 우기와 건기에 각각 2.95 mm/myr및 1.52 mm/myr의 거동을 보여 우기에 지하수 유입에 의한 지반의 약화로 인하여 건기보다 2배정도 거동하는 양상을 보인다. 한편, 연도 입구의 호벽은 건기에 전실쪽으로 0.43 mm/myr, 연도쪽으로 2.05 mm/myr의 거동을 보여 무령왕릉에서는 가장 심한 거동을 보이고 있다. 6호분의 거동현황은 건기에만 측정된 바, 현실의 동측벽과 서측벽이 각각 벽체 뒤쪽으로 7.44 mm/myr, 현실안쪽으로 3.61 mm/myr의 거동을 보여 조사대상 5호분, 6호분, 7호분, 중 가장 심한 거동을 보이고 있다. 이는 고분 벽돌의 깨짐이 6호분이 가장 심하다는 사실과 무관하지 않은 것으로 판단된다. 봉분내부의 토양층구조에 대한 지오레이다 영상단면을 분석한 결과 무령왕릉 연도상부의 누수지방지층이 심하게 균열되어 있음을 발견하였다. 이 곳은 고분내부로 직접누수가 발생하는 곳이다. 직접누수와 지하수 형태로 유입된 침투수는 고분군 주위의 지반의 함수비를 증가시켜 지반의 지지력을 약화시키고 또한 고분내로 서서히 유입되어 고분내부의 습도를 100%로 유지시키는 주된 원인이다. 이러한 높은 습도는 고분내의 남조류의 번식을 가져왔으며 남조류의 번식은 현재 6호분이 가장 심각하고 7호분이 우려되는 수준이며 5호분은 문제가 없는 것으로 판단된다. 이와 같이 고분군의 발굴후 인위적인 환경변화와 지속적인 강우침투 및 배수 불량의 영향은 고분군의 안정성에 상당한 위험을 초래하였으며, 현 상태는 각 고분에 대한 보강이 불가피한 것으로 판단된다. 고분 벽돌의 깨짐, 고분 벽체의 거동, 조류의 서식등을 포함하여 송산리 고분군에서 발생되고 있는 보존상의 제반 문제점들을 일차적으로 누수 및 침투수에 의한 결과이다. 그러므로 무엇보다도 고분군 내부 및 고분 주변으로의 강우 및 지하수 침투를 막는 차수 대책이 시급한 것으로 판단된다. 또한 이미 발생한 변위가 더 이상 진행되지 않도록 하중을 경감하고 토압의 균형을 이루는 보강대책이 시급한 실정이다. 고분군의 보존대책으로는 고분의 구조안전에 관하여 근본적인 구조변경이 불가피한 직접 보강대책보다 간접적인 보강대책이 바람직한 것으로 판단된다. 간접적 보강대책으로서는 현 봉분규모의 축소, 불균등토압의 조정, 강우침투 방지를 위한 최종복토시스템, 유도배수구의 설치 및 능선 상부로부터의 지하수 차단시설을 포함한다. 이러한 차수대책은 고분군의 제문제를 해결하는 가장 근본적인 대책이라 할 수 있다. 고분내 결로현상 및 습기 제거를 위하여 항온항습장치를 전실에 설치하고 덕트를 통하여 고분내 현실로 순환시키는 방법을 제안하며 외부 온도의 영향을 덜 받게 하기 위하여 전실상부 토양을 현재보다 두껍게 하고 전실의 천정마감재를 열전도도가 낮은 목재로 교체하며 출입문의 이동등을 제안하였다. 금번 조사 연구를 통하여 얻어진 각종 보수 및 보존대책은 고분구조 자체에 가능한 한 최소의 변화를 주면서 가장 시급한 문제점부터 해결하도록 제시되었다. 설계 및 시공단계에서는 보수의 경중을 가려 순서에 입각하여 이루어져야만 하며 설계 및 시공단계에서 고분의 구조안전에 영향을 주지 않도록 각별한 주의가 요망된다. 끝으로, 상기의 보수대책이 실시된 후 이에 대한 평가 및 향후의 영구 보존을 위한 벽체경사 계측, 함수비 및 지하수위 계측, 온습도 측정 등을 포함하는 사후계측시스템은 필수적이라 할 수 있다. 각종 계측자료를 이용한 장기적이고도 세심한 분석을 통하여 완벽한 보존 관리가 이루어져야할 것으로 사료된다.로 사료된다.

  • PDF

Experimental investigation on the use of recycled aggregates in producing concrete

  • Shah, Attaullah;Jan, Irfan U.;Khan, Raza U.;Qazi, Ehsan U.
    • Structural Engineering and Mechanics
    • /
    • 제47권4호
    • /
    • pp.545-557
    • /
    • 2013
  • Disposal of construction wastes poses major challenge to the municipal administration in the developing countries. At the same time new developments in these countries are unscrupulously exploiting the natural resources. The sustainable development requires judicious and careful utilization of natural resources. In this context, reuse of construction and demolition waste can save the global natural resources to greater extent. In this work the bricks and concrete waste from construction sites were crushed to the desired sizes and mixed in various proportions to study its properties in the concrete both in fresh and hardened states. Six mixes of natural and recycled aggregates were used to make the coarse aggregates for the concrete. From each mix nine cylinders were cast, which were tested at 7,14 and 28 days. The properties of concrete with recycled aggregates were compared with the control mix having natural aggregates. The nominal ratio of cement sand and coarse aggregates were kept at 1:2:4 by weight for all mixes. The tests have shown that concrete with recycled aggregates made from old concrete and brick bats provide greater opportunities for reuse of construction wastes in concrete.

Seismic assessment of R/C residential buildings with infill walls in Turkey

  • Korkmaz, Kasim Armagan;Kayhan, Ali Haydar;Ucar, Taner
    • Computers and Concrete
    • /
    • 제12권5호
    • /
    • pp.681-695
    • /
    • 2013
  • In 1999 Marmara and 2011 Van earthquakes in Turkey, majority of the existing buildings either sustained severe damage or collapsed. These buildings include masonry infill walls in both the interior and exterior R/C frames. The material of the masonry infill is the main variant, ranging from natural stones to bricks and blocks. It is demanding to design these buildings for satisfactory structural behavior. In general, masonry infill walls are considered by its weights not by interaction between walls and frames. In this study, R/C buildings with infill walls are considered in terms of structural behavior. Therefore, 5 and 8-story R/C buildings are regarded as the representative models in the analyses. The R/C representative buildings, both with and without infill walls were analyzed to determine the effects of structural behavior change. The differences in earthquake behavior of these representative buildings were investigated to determine the effects of infill walls leading structural capacity. First, pushover curves of the representative buildings were sketched. Aftermath, time history analyses were carried out to define the displacement demands. Finally, fragility analyses were performed. Throughout the fragility analyses, probabilistic seismic assessment for R/C building structures both with and without infill walls were provided. In this study, besides the deterministic assessment methodology, a probabilistic approach was followed to define structural effect of infill walls under seismic loads.

추력선 해석을 이용한 미얀마 파야톤주 사원의 손상 원인 분석 (Damage Cause Analysis of Phaya-Thon-Zu Temple in Myanmar Using Thrust Line Analysis)

  • 홍석일;전건우;정인기;한욱빈;김호수
    • 한국공간구조학회논문집
    • /
    • 제20권2호
    • /
    • pp.95-104
    • /
    • 2020
  • Phaya-Thon-Zu temple has a unique architectural style connected by the three temples, and cultural values are highly as murals remain on some of the walls. However, various damages in internal walls and vaults have occurred due to earthquake and environmental influences. In order to analyze these damages, accurate structural analysis is required, but structural modeling is difficult, because Phaya-Thon-Zu temple is the complex masonry structure which is stacked with small bricks. Therefore, this study intends to analyze the causes of damages by examining collapse mechanism for cross section and longitudinal section of vaults in the entrance hall and shrine by using thrust line analysis, which is a geometric method, and to compare it with the actual damage situation.

Different Aspects of Creativity

  • Gorzkowski, Waldemar
    • 영재교육연구
    • /
    • 제3_4권1호
    • /
    • pp.148-157
    • /
    • 1994
  • "Is a given boy or girl gifted in physics\ulcorner" That is a very complicated question and it is not easy to answer it as creativity and talents have many aspects. The lecture is devoted to analysis of several of them. In particular, we shall discuss the following points: 1) "Poets in physics". Some pupils have a seldom ability to create very beautiful, intellectual constructions starting from very few assumptions. Any building consists of commonly used bricks or other building elements, any book contains only several tens of commonly used letters or other graphic elements, also any painting may be created by appropriate use of several colors. Some buildings are nice, some not. Some paintings are beautiful, some not. Certain pupils, by appropriate use of several simple laws, are able to create beautiful constructions. They are like poets writing poetry by using several tens of letters known to everybody. 2) "Free hunters". Some pupils solve even very typical problems in a very untypical ways. Their independence in thinking is especially valuable. 3) "Small discoverers". Even very rich syllabuses do not contain whole physics. Some pupils e.g. during solving problems discover laws or rules that are absent in the syllabus. For example, some of them are able to make use of symmetry or dimensional analysis without any preliminary knowledge of that matter. The considerations are illustrated with different examples taken from physics or mathematics. The subject is very large and, of course, we are not able to present the problem in a complete way.o present the problem in a complete way.

  • PDF

Sintering process에 의한 MSWI fly ash를 혼합한 일차점토(一次粘土)와 적황토(赤黃土) 공시체(公試體)의 특성(特性) (Characteristics of Specimens Made from Primary Clay and Red Hwangto with MSWI Fly Ash by Sintering Process)

  • 유승철;권문선;박상민
    • 자원리싸이클링
    • /
    • 제19권2호
    • /
    • pp.10-18
    • /
    • 2010
  • 본 연구는 소성공정으로 MSWI fly ash를 혼합한 일차점토와 적황토 공시체의 특성을 알아보기 위하여 진행되었다. 최대 20 wt% MSWI fly ash를 혼합한 공시체는 SEM, UTM, ICP 등의 방법으로 분석되었으며, 그 결과 $P_{10}$공시체는 휨강도가 증가하였고, $R_5$공시체는 압축강도와 휨강도가 증가하였다. 또한 중금속 용출량도 기준치를 만족하였다. 이것은 MSWI fly ash가 소성공정에 의한 벽돌제조에서 기존 재료의 부분대체에 적합하다는 것을 나타내는 것이다.

픽춰레스크(Picturesque)미학에 나타난 실내디자인 특성에 관한 연구 (A Study of Interior Design Characteristics from Picturesque Aesthetical Perspective)

  • 우창옥;박형진
    • 한국실내디자인학회논문집
    • /
    • 제22권3호
    • /
    • pp.81-90
    • /
    • 2013
  • There has been current trend running through each generation. All the leading areas in the fashion, art, architect industries etc. are absorbing the needs of the mass users and getting popular and high attentions from the society. One of recent trends are the interior design utilizing the aged style of materials such as bricks, antique and vintage objets. It is applied not only for the cafeteria, movie theater, museum but the cultural space. It reflects the brand-new and Utopian interpretation of design longings for the nostalgia and the old ages. This goes back to the picturesque aesthetics in the 1980s. The term "picturesque" means "picture-like". And it originated from the Utopian vision taken from the landscape paintings of English aristocrat's trip to Europe. it mainly reflects people's longing for the nostalgia and their the happy days in the past. In recent days of bad economies, it has been found in various areas from people's desire for the prosperity in the last days. The objective of this study is to examine the up-current trend of picturesque aesthetics and see its characteristics and how it can be applied to the interior design. And the feasibility study for the necessity of the picturesque aesthetics, any spatioperceptual elements and capable space for human beings to be made for an eclectic space in the desolate modern day life.

An instrumented Glove for Grasp specification in virtual reality based point-and-direct telerobotics

  • Yun, Myung-Hwan;Cannon, David;Freivalds, Andris
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
    • /
    • pp.141-146
    • /
    • 1996
  • Hand posture and force, which define aspects of the way an object is grasped, are features of robotics manipulation. A means for specifying these grasping "flavors" has been developed that uses an instrumented glove equipped with joint and force sensors. The new grasp specification system is being used at the Pennsylvania State University (Penn State) in a Virtual Reality based Point-and-Direct(VR-PAD) robotics implementation. In the Computer Integrated Manufacturing (CIM) Laboratory at Penn State, hand posture and force data were collected for manipulating bricks and other items that require varying amounts of force at multiple pressure points. The feasibility of measuring desired grasp characteristics was demonstrated for a modified Cyberglove impregnated with FSR (Force Sensitive Resistor) pressure sensors in the fingertips. A joint/force model relating the parameters of finger articulation and pressure to various lifting tasks was validated for the instrumented "wired" glove. Operators using such a modified glove may ultimately be able to configure robot grasping tasks in environments involving hazardous waste remediation, flexible manufacturing, space operations and other flexible robotics applications. In each case, the VR-PAD approach improved the computational and delay problems of real-time multiple-degree-of-freedom force feedback telemanipulation.ck telemanipulation.

  • PDF