• Animal Bioscience
• /
• 제37권5호
• /
• pp.832-838
• /
• 2024

Objective: The use of molecular genetic methods in pig breeding can significantly increase the efficiency of breeding and breeding work. We applied the F_st (fixsacion index) method, the main focus of the work was on the search for common options related to the number of born piglets and the weight of born piglets, since today the urgent task is to prevent a decrease in the weight of piglets at birth while maintaining high fertility of sows. Methods: One approach is to scan the genome, followed by an assessment of Fst and identification of selectively selected regions. We chose Large White sows (n = 237) with the same conditions of keeping and feeding. The data were collected from the sows across three farrowing. For genotyping, we used GeneSeek GGP Porcine HD Genomic Profiler v1, which included 68,516 single nucleotide polymorphisms evenly distributed with an average spacing of 25 kb (Illumina Inc, San Diego, CA, USA). Results: Based on the results of the Fst analysis, 724 variants representing selection signals for the signs BALWT, BALWT1, NBA, and TNB (weight of piglets born alive, average weight of the 1st piglets born alive, total number born alive, total number born). At the same time, 18 common variants have been identified that are potential markers for both the number of piglets at birth and the weight of piglets at birth, which is extremely important for breeding work to improve reproductive characteristics in sows. Conclusion: Our work resulted in identification of variants associated with the reproductive characteristics of pigs. Moreover, we identified, variants which are potential markers for both the number of piglets at birth and the weight of piglets at birth, which is extremely important for breeding work to improve reproductive performance in sows.

• Geomechanics and Engineering
• /
• 제38권3호
• /
• pp.215-229
• /
• 2024

Because of the various patterns of deep-water inrush and complicated mechanisms, accurately predicting mine water inflows is always a difficult problem for coal mine geologists. In study presented in this paper, the water inrush channels were divided into four basic water diversion structures: aquifer, rock fracture zone, fracture zone and goaf. The fluid flow characteristics in each water-conducting structure were investigated by laboratory tests, and multistructure and multisystem coupling flow analysis models of different water-conducting structures were established to describe the entire water inrush process. Based on the research of the water inrush flow paths, the analysis model of different water inrush space structures was established and applied to the prediction of mine water inrush inflow. The results prove that the conduction sequence of different water-conducting structures and the changing rule of permeability caused by stress changes before and after the peak have important influences on the characteristics of mine water-gushing. Influenced by the differences in geological structure and combined with rock mass RQD and fault conductivity characteristics and other mine exploration data, the prediction of mine water inflow can be realized accurately. Taking the water transmitting path in the multistructure as the research object of water inrush, breaking through the limitation of traditional stratigraphic structure division, the prediction of water inflow and the estimation of potentially flooded area was realized, and water bursting intensity was predicted. It is of great significance in making reasonable emergency plans.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권10호
• /
• pp.1565-1574
• /
• 2018

Objective: The aim of the present study was to identify genetic variants based on RNA-seq data, obtained via transcriptome sequencing of muscle tissue of pigs differing in muscle histological structure, and to verify the variants' effect on histological microstructure and production traits in a larger pig population. Methods: RNA-seq data was used to identify the panel of single nucleotide polymorphisms (SNPs) significantly related with percentage and diameter of each fiber type (I, IIA, IIB). Detected polymorphisms were mapped to quantitative trait loci (QTLs) regions. Next, the association study was performed on 944 animals representing five breeds (Landrace, Large White, Pietrain, Duroc, and native Puławska breed) in order to evaluate the relationship of selected SNPs and histological characteristics, meat quality and carcasses traits. Results: Mapping of detected genetic variants to QTL regions showed that chromosome 14 was the most overrepresented with the identification of four QTLs related to percentage of fiber types I and IIA. The association study performed on a 293 longissimus muscle samples confirmed a significant positive effect of transforming acidic coiled-coil-containing protein 2 (TACC2) polymorphisms on fiber diameter, while SNP within forkhead box O1 (FOXO1) locus was associated with decrease of diameter of fiber types IIA and IIB. Moreover, subsequent general linear model analysis showed significant relationship of FOXO1, delta 4-desaturase, sphingolipid 1 (DEGS1), and troponin T2 (TNNT2) genes with loin 'eye' area, FOXO1 with loin weight, as well as FOXO1 and TACC2 with lean meat percentage. Furthermore, the intramuscular fat content was positively associated (p<0.01) with occurrence of polymorphisms within DEGS1, TNNT2 genes and negatively with occurrence of TACC2 polymorphism. Conclusion: This study's results indicate that the SNP calling analysis based on RNA-seq data can be used to search candidate genes and establish the genetic basis of phenotypic traits. The presented results can be used for future studies evaluating the use of selected SNPs as genetic markers related to muscle histological profile and production traits in pig breeding.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.777-782
• /
• 2002

Reciprocal effects among local breeds and additive and heterosis effects were estimated for total milk production per lactation (TLP), lactation length (LL) and daily milk yield (DMY). Procedures for an optimum crossbreeding system were examined by comparing various crossbred combinations. Three data sets were chosen from the total records collected from 1962 to 1997. Data set I with a total of 5,938 records composed of 9 breed groups for reciprocal crosses, data set II with a total of 6,064 records composed of 5 breed groups for additive and heterosis effects and data set III with a total of 10,319 records composed of 42 breed groups for optimum crossbreeding system were analyzed. The least squares ANOVA was used. The reciprocal crosses between Red Sindhi and the Bangladeshi Local showed significant difference. When the Red Sindhi was used as cow, the cross was superior to the opposite in terms of the three performance traits. The results showed that additive breed effects on both TLP and DMY were positive and highly significant between Bos indicus and Bos taurus, whereas the individual heterosis effects were not significant. In general, any local breeds were improved two to three times by crossing with the Friesian once or twice. However, the effect was reduced when the grading up with the Friesian was repeated more than twice. On the other hand, when the local breed was crossed with the other breeds such as Holstein and Jersey, the improvement of TLP was less. Crossing the F1 cows with the Friesian bull gave further improvement. Almost the same trends were found also for LL and DMY. The local breeds and their crosses are raised mainly for draft animals, then it is recommended that the crossbreds between the local cows and Friesian are used for dairy purposes and more than 75% Friesian blood is used for beef.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권6호
• /
• pp.843-845
• /
• 1999

To evaluate direct and maternal effects on calf market weight (CMW) and carcass weight (CW) in Japanese Black cattle under an animal model, genetic parameters were estimated using 51,320 records of CMW and 11,944 records of CW, respectively. Direct and maternal heritabilities, and direct-maternal genetic correlation were estimated to be 0.22, 0.06 and 0.27 for CMW, and 0.23, 0.12 and -0.40 for CW, respectively. Correlation coefficient between maternal breeding values for CMW and CW was 0.521 for 157 sires appeared in both CMW and CW data sets. These results suggest that the maternal genetic effect on pre-weaning growth carries over to carcass weight. Maternal breeding values for both calf market weight and carcass weight could be used as the indicator traits of maternal ability in Japanese Black cattle.

• 농업과학연구
• /
• 제45권3호
• /
• pp.317-323
• /
• 2018

The demand for crop production is increasingly becoming steeper due to the rapid population growth. As a result, breeding cycles should be faster than ever before. However, the current breeding methods cannot meet this requirement because traditional phenotyping methods lag far behind even though genotyping methods have been drastically developed with the advent of next-generation sequencing technology over a short period of time. Consequently, phenotyping has become a bottleneck in large-scale genomics-based plant breeding studies. Recently, however, phenomics, a new discipline involving the characterization of a full set of phenotypes in a given species, has emerged as an alternative technology to come up with exponentially increasing genomic data in plant breeding programs. There are many advantages for using new technologies in phenomics. Yet, the necessity of diverse man power and huge funding for cutting-edge equipment prevent many researchers who are interested in this area from adopting this new technique in their research programs. Currently, only a limited number of groups mostly in developed countries have initiated phenomic studies using high throughput methods. In this short article, we describe the strategies to compete with those advanced groups using limited resources in developing countries, followed by a brief introduction of high throughput phenotyping.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권2호
• /
• pp.255-260
• /
• 1994

Calving records of 107 heifers from two breed groups were used to identify the major factors contributing to calving difficulty (dystocia) and compare the influence of pelvic diameters, weight and height of heifers measured after breeding and before calving on dystocia. The horizontal and vertical pelvic diameters, hip height and weight of heifers were measured two months after breeding and again two months before calving. Snell transformed calving difficulty scores (0 = normal to 100 = surgical intervention) were used in analyzing the data by analysis of covariance. Body condition score of the heifer, sire birth weight of the calf, birth weight of the calf, and ratio of calf birth weight to pelvic area all had significant effects on dystocia. Calf birth weight, ratio of calf birth weight to pelvic area, and heifer's condition score were especially important. However, sex of calf did not have a significant influence on dystocia. Generally, the variables measured before calving accounted for a higher proportion of variation in dystocia than those measured after breeding. Thus, based on the relative importance of the major factors affecting dystocia, it is suggested that selection of bulls with low birth weight for breeding on normal size heifers with optimum body condition score, and well developed pelvic opening, would be effective in reducing the incidence and severity of dystocia in beef heifers.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 춘계학술대회
• /
• pp.61-61
• /
• 2019

In any crop breeding program Selection and use of genetically diverse genotypes to develop cultivars with a broad genetic base is important. Molecular markers play a major role in selecting diverse genotypes. Molecular breeding programs of the crop can be made more efficient by use of molecular markers. The present study was done with an aim of analyzing genetic diversity and the population structure in 24 accessions of sunflower (Helianthus annus L.) from Kenya genetic diversity using 35 EST-SSR and gSSR primers.Out of the 35 markers 3 were not polymorphic as they indicated Polymorphic Information content( PIC) of value 0.00 and so the data analysis was done using 32 markers . The 32 set of markers used produced 29 alleles ranging from 2 to 7with a mean of 3.0 alleles per locus.The average value of polymorphic information contents(PIC) were 0.3 .Genetic diversity analysis using these markers revealed 3 major clusters. This result could be useful for designing strategies to make elite hybrid and inbreeding of crossing block for breeding and future molecular breeding programs to make elite variety.

• 한국환경과학회지
• /
• 제30권2호
• /
• pp.191-194
• /
• 2021

This study aimed to provide information and data for the management of insect breeding farms by identifying the appropriate density when rearing Protaetia brevitarsis larvae. The breeding box of the insects was filled with 2 L of fermented sawdust on a 50 × 35 × 15 cm sheet of plastic, and the density of the treatments was 200, 300 and 400 P. brevitarsis in the first, second, and third larval stages. Each treatment was repeated five times, and the sawdust medium was replaced three times (10 intervals). The experiments were conducted for a total of 30 days from March 1, 2020. Overall, 200 P.brevitarsis in the first, second, and third larval stages reared in the breeding box had a higher average survival rate and lower average mortality rate, thereby contributing to efficient production. In conclusion, this result suggests a way to increase production efficiency through the environmental management of insect breeding farms.

• The Plant Pathology Journal
• /
• 제38권4호
• /
• pp.296-303
• /
• 2022

The cucurbit powdery mildew (CPM) caused by different fungal species is a major concern for cucurbit crops around the world. In Argentina CPM constitutes the most common and damaging disease for cucurbits, especially for squash crops (Cucurbita moschata). The present study displays initial insights into the knowledge of the disease in western Argentina, including the determination of the prevalent species causing CPM, as well as the evaluation of the resistance of squash cultivars and breeding lines. Fungal colonies were isolated from samples collected in Mendoza province, Argentina. A field trial was also performed to assess the resistance of five squash accessions, including commercial cultivars and breeding lines. The severity of CPM was analyzed and epidemiological models were built based on empirical data. The morphological determinations and analysis with specific molecular markers confirmed Podosphaera xanthi as the prevalent causal agent of CPM in Mendoza. The results od the field trial showed differences in the resistance trait among the squash accessions. The advanced breeding line BL717/1 showed promising results as source of CPM resistance for the future development of open pollinated resistant cultivars, a crucial tool for an integrative control of the disease.