• 제목/요약/키워드: breakthrough water pressure

검색결과 10건 처리시간 0.028초

다공성 고분자 분리막의 임계투과압력 (Critical Breakthrough Pressure through Porous Polymer Membrane)

  • 이용택;전현수;안효성;이영진;송인호;이형근
    • 멤브레인
    • /
    • 제16권4호
    • /
    • pp.259-267
    • /
    • 2006
  • 다공성 폴리비닐리덴플루오라이드(PVDF, polyvinylidenefluoride) 그리고 폴리테트라플루오르에틸렌(PTFE, Polytetrafluoroethylene)에 대하여 순수한 물, $0.1M{\sim}4.0M$ NaOH 수용액, 그리고 $0.1M{\sim}3.0M\;NaHSO_3$ 수용액을 사용하여 임계투과압력을 측정하였다. 임계투과압력은 동일한 평균 기공 크기의 PVDF보다 PTFE가 크게 나타남을 관찰할 수 있었다. NaOH 수용액의 경우 NaOH의 농도 증가에 따라 임계투과압력은 감소하였으며 1.0 M 농도에서 최소값을 나타낸 후 다시 증가함을 확인하였다. 그러나 NaOH이 아닌 다른 염을 용해한 수용액인 $NaHSO_3$ 수용액의 경우 농도를 3.0 M까지 증가하여도 임계투과압력이 계속 감소함을 알 수 있었다. 이와 같은 현상을 이론적인 Cantor식으로 해석할 수 있었다.

글로우방전을 이용한 폴리에스테르 직물의 투습방수성 개질 (Water Repellent Finish of Polyester Fabric Using Glow Discharge Treatment)

  • 김태년
    • 한국의류학회지
    • /
    • 제25권1호
    • /
    • pp.154-161
    • /
    • 2001
  • We have treated polyester fabric with $CF_4,\;C_2F_6,\;SF_6\;and\;C_3F_6$ glow discharge plasmas to develop functional fabrics which preserve moisture transportation and water proofing nature. Modified properties were evaluated by water vapor permeation rate and breakthrough water pressure. The change of surface morphology was observed by SEM. Fiber interstice of the plasma treated fabric was calculated as $0.32{\mu}{\textrm}{m}$, and this value was sufficiently ideal as water repellent material. The moisture transportation of ${CF_4}-treated$ fabric was good as much as untreated fabric, and those of $C_2$F(sub)6-treated, SF(sub)6-treated fabrics were reduced by 1~3%, and that of ${C_3F_6}-treated$ fabric was reduced by 15%. The best treatment condition were 0.06 torr 120 seconds in $CF_4$, 0.05 torr 30 seconds in $SF_6$, 0.08~0.15 torr 90 seconds in $SF_6$ and 0.1 torr 45 seconds in $C_3F_6$ respectively. The grade of moisture transportation effect was $CF_4>C_2F_6>SF_6>>C_3F_6$, and water proofing effect was $C_2F_6{\approx}CF_4>C_3F_6>SF_6$. It was observed by SEM that the thin film was formed on the surface of the treated substrate by the fluorocarbon plasma treatment.

  • PDF

Hydraulic Property and Solute Breakthrough from Salt Accumulated Soils under Various Head Pressures

  • Lee, Sanghun;Chung, Doug-Young;Hwang, Seon-Woong;Lee, Kyeong-Bo;Yang, Chang-Hyu;Kim, Hong-Kyu
    • 한국토양비료학회지
    • /
    • 제45권5호
    • /
    • pp.717-724
    • /
    • 2012
  • Salt accumulated soil should be reclaimed to lower salt level for crop production. This study was carried out to investigate the characteristics of water flow and transport of mono and divalent solutes on salt accumulated soils with different head pressures. Saturated hydraulic conductivity was measured by constant and falling head methods with maintaining different head pressures. Saturated hydraulic conductivity was influenced by bulk density and organic matter contents in soils, but it had different elusion patterns between saline and sodic soil. While the quantity of water necessary for reclamation could be varies with soil type, it was considered that the supply of one pore volume of water was affordable and economic. Additional head pressure significantly increased the volume of leachate at a given time and it was more effective at low organic matter soils. The results indicate that additional head pressure would be one of the best irrigation practices on desalination method for salt accumulated soils.

설폰산형 비드와 섬유 혼성체를 이용한 도금수세수 중의 니켈 흡착 특성 (Adsorption Properties of Nickel ion from Plating Rinse Water Using Hybrid Sulfonated Bead and Fibrous Ion Exchanger)

  • 황택성;조상연
    • 폴리머
    • /
    • 제27권1호
    • /
    • pp.61-68
    • /
    • 2003
  • 본 연구에서는 도금폐수 중 니켈이온의 분리 회수를 위한 혼성 이온교환체의 제조 및 흡착 특성을 확인하였다. 니켈 흡착량은 이온교환체의 혼합비에 큰 영향이 없었으며, 비드상 이온교환수지 양이 증가할수록 증가하였다. 또한 Langmuir와 Freundlich흡착 등온식이 직선성을 보였으며 이로부터 니켈의 이온교환 친화력이 큰 것을 확인하였다. 또한 충전방식에 따른 압력손실은 다단충전법에서 적층수가 많아질수록 작아졌고, 혼합충전법에서는 비드 이온교환수지의 양이 증가할수록 압력손실은 감소하였다. 한편, 연속식 흡착실험 결과 다단충전방식의 경우 적층수가 증가할수록 초기 파괴 시간은 짧아졌으며, 최종 파괴 시간은 거의 동일한 것으로 나타났다. 반면, 혼합충전방식의 경우 이온교환섬유의 양이 증가할수록 흡착파괴 시간이 짧았으며, 이때 최대 흡착량은 각각 2.51 meq/g과 2.69 meq/g이었다. 한편, 모든 이온 교환체의 흡착된 니켈이온의 탈착은 10분 이내에 98% 이상 탈착되었다.

Studies on the Separation Performances of Chlorophenol Compounds from Water by Thin Film Composite Membranes

  • Yogesh, K.M. Popat;Ganguly, B.;Brahmbhatt, H.;Bhattacharya, A.
    • Macromolecular Research
    • /
    • 제16권7호
    • /
    • pp.590-595
    • /
    • 2008
  • The pressure driven membrane process has been a breakthrough in the removal of pollutants from drinking water. These experiments examined the removal of chlorophenol compounds from water using low pressure membranes. The removal performance of the membranes was based primarily on size exclusion. Apart from size exclusion, the polarity and pKa of the compounds also influences the membrane performance. The molecular size and dipole moments of the respective molecules were calculated using a quantum chemical method. The rejection of pollutants also followed the same trend as salt rejection by the membranes.

혼합대 흐름이 지표수 내 용질거동에 미치는 영향 수치모의 분석 (Numerical analysis of the hyporheic flow effect on solute transport in surface water)

  • 김준성
    • 한국수자원학회논문집
    • /
    • 제55권1호
    • /
    • pp.23-32
    • /
    • 2022
  • 본 연구는 지표수-지하수 연계 2차원 흐름 및 용질거동 수치모의를 통해 혼합대 흐름에 의한 지표수-하상 경계층 용질교환이 지표수 내 용질거동에 미치는 영향을 분석하였다. 먼저, 혼합대 흐름이 부재한 불투수성 하상의 경우 사련 하상파에 의해 발달한 바닥면 근처 재순환 흐름의 포착 효과가 용질 파과곡선 형태를 결정하였다. 반면, 용질이 혼합대로 유입되는 투수성 하상에서는 지표수 대비 유속이 느린 혼합대 흐름에 의해 파과곡선 꼬리 부분 농도가 증가하여 파과곡선 꼬리 연장이 급격히 증가하였다. 또한, 지표수 유속 증가는 바닥면 압력 상승과 함께 혼합대 흐름을 빠르게 하여 파과곡선 꼬리의 연장을 단축시켰다. 이러한 본 연구의 결과는 지표수 내 용질 체류시간 예측에 있어 혼합대 흐름의 중요성을 시사하는 바이다.

2 리터급 터보과급 가솔린 기관에서 내장형 WGV가 기관 성능에 미치는 영향 (The Effect of the Embedded WGV on the Engine Performance for a 2-liter Turbo-charged Gasoline Engine)

  • 장종관
    • 한국자동차공학회논문집
    • /
    • 제24권2호
    • /
    • pp.232-241
    • /
    • 2016
  • The turbocharger, to decrease the harmful exhaust gas(CO, HC and etc.) and $CO_2$ emission as well as the increase of the engine output, would be an useful method for engine downsizing. Therefore the thermal endurance of turbine blade, the lubrication of turbine shaft and the engine knock according to the supercharge of the inlet air, had been studied. And there had been much progress in these research tasks to be achieved a breakthrough. But a study on the built-in WGV of a gasoline engine for a passenger car which may effect on the engine performance, is few. In this paper, the effect of the embedded WGV on the engine performance was performed through the endurance test, which was conducted more than 300 hrs using the 4 stroke, 1998 cc, water-cooled engine. To sum up the major results, there were an abrasion in the area of the WGV head edge and the thermal deformation on the WGV head face, These phenomena led to reducing the boost pressure which caused the reduction in the volumetric efficiency of the engine. It resulted in decreasing the engine power gradually during the life cycle of the embedded WGV.

Surfactant enhanced filtration performances of monochlorophenol isomers through low-pressure membrane

  • Kumar, Yogesh;Brahmbhatt, H.;Trivedi, G.S.;Bhattacharya, A.
    • Membrane and Water Treatment
    • /
    • 제2권3호
    • /
    • pp.137-145
    • /
    • 2011
  • Membrane processes are major breakthrough for the removal of organic pollutants in water remediation. The separations of solutes depend on nature of the membranes and solutes. The separation performance depends on the nature of the solutes (i.e., molecular volume, polarity, and hydrophobicity) for the same membrane. As 4-chlorophenol is of more dipolemoment compared to 2-chlorophenol, the orientation of the molecule enables it pass through the pores of the membrane, which is of negatively charged and thus separation order follows: 2-chlorophenol > 4-chlorophenol. Hydrophobicity factor also supports the order. Addition of sodium dodecyl sulfate (SDS) to chlorophenol solution shows remarkable increase in separation performance of the membrane. The improvement in separation is 1.8 and 1.5 times for 4- and 2- chlorophenol consecutively in case of 0.0082 M SDS (1cmc = 0.0082 M) in the solution. 4-chlorophenol has better attachment tendency with SDS because of its relatively more hydrophobic nature and thus reflects in performance i.e. the separation performance of 4-chlorophenol with SDS through the membrane is better compared to 2-chlorophenol.

Wearable Intelligent Systems for E-Health

  • Poon, Carmen C.Y.;Liu, Qing;Gao, Hui;Lin, Wan-Hua;Zhang, Yuan-Ting
    • Journal of Computing Science and Engineering
    • /
    • 제5권3호
    • /
    • pp.246-256
    • /
    • 2011
  • Due to the increasingly aging population, there is a rising demand for assistive living technologies for the elderly to ensure their health and well-being. The elderly are mostly chronic patients who require frequent check-ups of multiple vital signs, some of which (e.g., blood pressure and blood glucose) vary greatly according to the daily activities that the elderly are involved in. Therefore, the development of novel wearable intelligent systems to effectively monitor the vital signs continuously over a 24 hour period is in some cases crucial for understanding the progression of chronic symptoms in the elderly. In this paper, recent development of Wearable Intelligent Systems for e-Health (WISEs) is reviewed, including breakthrough technologies and technical challenges that remain to be solved. A novel application of wearable technologies for transient cardiovascular monitoring during water drinking is also reported. In particular, our latest results found that heart rate increased by 9 bpm (P < 0.001) and pulse transit time was reduced by 5 ms (P < 0.001), indicating a possible rise in blood pressure, during swallowing. In addition to monitoring physiological conditions during daily activities, it is anticipated that WISEs will have a number of other potentially viable applications, including the real-time risk prediction of sudden cardiovascular events and deaths.

냉매와 습공기가 교차하는 2중관에서 전열계수 예측을 위한 연구 (The study on the estimation of heat transfer coefficient through the counterflow concentric tube using refrigerant and moisture air)

  • 조권희
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권5호
    • /
    • pp.687-694
    • /
    • 1999
  • This study was conducted to develop new drying process for automatic control and marine engi-neering system. Air-water tests were carried out to investigate dryer performance. The dispersed flow in he dryer test apparatuses was also simulated by using a numerical code which solves the Dittus-Boelter equation for continuous liquid phase and the Reynolds equation of droplet motion for continuous liquid phase and the Reynolds equation of droplet motion for dispersed phase to predict droplet removal efficiency. Proper conditions for dehumidification were optimized by response ambient conditions. When the selected indexes were constrained in the range of 85-98% moisture content above $15^{\circ}$ and more than mass flow rates of moist air 750kg/h. The numerical results were compared with the experimental data pertaining to the removal effi-ciency at chamber stage and overall pressure drop along concentric tubes Good agreement was obtained as for the efficiency while relatively poor agreement was obtained for the relative humidity. The results also showed that the efficiency depended strongly on the relative humidity at the inlet condition which indicated the importance of estimating the heat exchanger length. Effects of some design parameters in both removal efficiency and breakthrough onset condition are discussed.

  • PDF