• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 춘계학술대회
• /
• pp.253-254
• /
• 2014

In offshore, various external forces such as wind force, wave force and impulsive breaking wave force act on offshore structures. Many researches about this forces are published. Kim and Cao(2008) published researche on wave force of vertical cylinder. Kim and Go(2013) performed research on the subgrade reaction by external forces. Among this forces, impulsive breaking force is more massive than other forces, especially. Therefore, the studies about impulsive breaking wave forces have been carried out. Chun and Shim(1999) analyzed dynamic behavior of cylindrical pile subjected to impulsive breaking wave force. In this study, when the impulsive breaking wave force acts on the offshore wind turbine, the subgrade reaction acting on the mono-pile of the offshore wind turbine is calculated by p-y curve. The calculation is carried out to the multi-layered.

• 한국항해항만학회지
• /
• 제39권5호
• /
• pp.385-391
• /
• 2015

In offshore, various external forces such as wind force, tidal current and impulsive breaking wave force act on offshore wind tower. Among these forces, impulsive breaking wave force is especially more powerful than other forces. Therefore, various studies on impulsive breaking wave forces have been carried out, but the soil reaction are incomplete. In this study, the p-y curve is used to calculate the soil reaction acting on the offshore wind tower when an impulsive breaking wave force occurs by typhoon. The calculation of offshore wind tower against impulsive breaking wave force is applied for the multi-layered soil. The results obtained in this study show that although the same wave height is applied, the soil reaction generated by impulsive breaking wave force is greater than the soil reaction generated by wave force.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.7-17
• /
• 2002

Recently, artificial rocks, instead of buoys, have been placed on the submerged breakwater to indicate its location. The accurate estimation of wave forces on these rocks is deemed necessary for their stability design. Characteristics of the wave force, however, are expected . to be very complicated because of the occurrence of breaking or post-breaking waves. In this regard, wave forces exerted on an artificial rock have been investigated in this paper. The maximum wave force has been found to strongly dependent on the location and shape of the artificial rock that is placed on the submerged breakwater. The plunging breaker occurs near the loading cram edge of a submerged breakwater, which cause impulsive breaking wave force on the rock. Using the Morison equation, with the velocity and acceleration at the front face of the artificial rock and varying water surface level, it is possible to estimate wave forces, even impulsive breaking wave forces, that are acting on the rock installed on a submerged breakwater. The vertical wave force is also found to depend, significantly, on the buoyant force.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.75-80
• /
• 1996

The importance of the impact force on the vertical offshore circular structure member in the surf zone due to the breaking wave has been recognized recently. In this paper characteristics of breaking wave forces and the corresponding estimation procedures for them are investigated. For the characterization of the wave forces, three parts, drag force, inertia force, impact force are categorized and identified, respectively. Among them the impact force is maimly studied and the concise form of the force is proposed with the application scheme for the design of offshore circular structure member. The resulting form porposed here for impact force is well coincided with former research results by other people. Except the impact force, so called Morison equation can be employed for the common offshore structure design. The drag force and inertia force are represented as convertionally for the profile except the breaking part. In the numerical example, for thpical sea condition and the member size, the proposed procedures for the breaking wave forces calculation are demonstrated. It is found that the impact force is the most deminant one comparing with inertia and drag forces in the surf zone.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.220-226
• /
• 2001

It is important to estimate exactly wave forces acting on various types of offshore structures under the severe environmental conditions in the ocean site. This paper presents an easy experimental method which deals with transient waves. The proposed scheme made it possible to generate breaking waves at any position in the wave tank by changing the maximum slope of the component waves. The theoretical and experimental methods were investigated by generating concentrated waves which acted on a single and multiple cylinders. The waves forces increased rapidly when the models encountered breaking waves. The theoretical results underestimates the forces due to breaking waves. Therefore, the effects due to breaking waves should be considered carefully in the design process of a structure under the influence of breaking waves.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.8-13
• /
• 2001

It is important to estimate exactly wave forces acting on various types of offshore structures under the severe environmental conditions in the ocean site. This paper presents an easy experimental method which deals with transient waves. The proposed scheme made it possible to generate breaking waves at any position in the wave tank by changing the maximum slope of the component waves. The theoretical and experimental methods were investigated by generating concentrated waves which acted on a single and multiple cylinders. The waves forces increased rapidly when the models encountered breaking waves. The theoretical results underestimates the forces due to breaking waves. Therefore, the effects due to breaking waves should be considered carefully in the design process of a structure under the influence of breaking waves.

• 한국해안해양공학회지
• /
• 제10권2호
• /
• pp.100-108
• /
• 1998

해양구조물의 연직 원형파일에 작용하는 파력은 파일 직경이 입사파장에 비해 매우 작은 경우에는 주로 항력과 관성력의 합으로 표시되는 Morison 식을 이용하여 결정하여 왔다. 그러나 Morison 식은 대칭형장을 유지하며 비교적 완만히 변화하는 파에 대해서 적용이 가능하다. 구조물 부재에 쇄파가 작용할 경우, 쇄파파력은 항력과 관성력에 추가하여 강한 충격쇄파력을 고려해야 한다. 본 연구는 임의 이차원 경사해빈에서 경계요소법을 적용하여 쇄파 내부점들의 수립자 속도 및 가속도를 계산하고, 이들을 이용하여 쇄파에 의한 쇄파파력을 계산하기 위한 모델기법을 수립하였다. 모델결과는 기존의 쇄파파력 측정 실험결과와 매우 잘 일치하였으며, Morison 식의 적용결과와 비교할 때 쇄파파력은 최고 약 3배, 모멘트는 최고 약 5배 정도 크게 나타났다

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.439-445
• /
• 2017

Plunging breaker slamming pressures on vertical or sloping sea dikes are one of the most severe and dangerous loads that sea dike structures can suffer. Many studies have investigated the impact forces caused by breaking waves for maritime structures including sea dikes and most predictions of the breaker forces are based on empirical or semi-empirical formulae calibrated from laboratory experiments. However, the wave breaking mechanism is complex and more research efforts are still needed to improve the accuracy in predicting breaker forces. This study proposes a semi-empirical formula, which is based on impulse-momentum relation, to calculate the slamming pressure due to plunging wave breaking on a sloping sea dike. Compared with some measured slamming pressure data in two literature, the calculation results by the new formula show reasonable agreements. Also, by analysing probability distribution function of wave heights, the proposed formula can be converted into a probabilistic expression form for convenience only.

• 한국해안해양공학회지
• /
• 제11권3호
• /
• pp.141-148
• /
• 1999

圓形 파일에 작용하는 卷波性 碎波力은 쇄파제원과 동일한 正弦波를를 대상으로 한 모리슨식의 계산치보다 그 크기는 월등 크나 보통 백분의 수초 이내의 매우 짧은 시간 동안 작용한다. 따라서, 碎波力을 받는 파일의 설계에서 파일의 變位를 정확히 결정하기 위해서는 쇄파력 작용에 의한 動的擧動을 해석하여야 한다. 이를 위해서는 파일 延長上 쇄파력의 시게열에 대한 事前정보가 필요하며, 이는 파일 주변의 碎波壓 시계열로부터 간접적으로 추정할 수 있다. 본 연구에서는 卷波性 碎波의 작용에 따른 쇄파압의 특성을 정량적으로 고찰하기 위하여 實海域에 설치되어 잇는 원형파일에 波壓計를 부착하여 쇄파압을 관측하고 그 결과를 제시하였다.

• 한국해안해양공학회지
• /
• 제19권2호
• /
• pp.136-145
• /
• 2007

파랑이 수중 천퇴부를 넘어 쇄파하는 경우 파고는 작게 형성되나 강한 이차적 흐름 (쇄파유도류)이 발생한다. 따라서, 임의의 해양구조물이 쇄파대에 위치할 경우에는 단순히 가시적인 파고에만 근거한 파력산정은 과소설계를 초래할 가능성이 있으며 구조물의 안정설계를 위해서는 쇄파유도류의 유속이 가미된 상태에서의 유체력을 정확히 산정하여 반영할 필요가 있다. 본 연구에서는 Boussinesq 방정식 모델을 이용하여 쇄파대내에서의 파고분포와 쇄파유도류를 계산하는 기법을 수립하였으며 과거에 수행하였던 이어도 해양과학기지의 수리모형실험 (1/120)의 모델영역에 적용하였다. 이 계산결과를 이용하여 모형구조물에 작용하는 유체력을 계산하고 수리모형실험 결과와 비교함으로써 쇄파유도류의 영향을 정량적으로 평가하였다.