• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2015

The limited battery power in the mobile environment, lack of sufficient wireless bandwidth, limited resources of mobile terminals, and frequent breakdowns of the wireless network have become major hurdles in the development of mobile cloud computing (MCC). In order to solve the abovementioned problems, This paper propose a proxy-based MCC framework by adding a proxy server between mobile devices and cloud services to optimize the access to cloud services by mobile devices on the network transmission, application support, and service mode levels. Finally, we verify the effectiveness of the developed framework through an experimental analysis. This framework can ensure that mobile users have efficient access to cloud services.

• Journal of the Korea Society for Simulation
• /
• v.7 no.2
• /
• pp.45-62
• /
• 1998

This research is concerned with buffer management in a multi-cell FMS with an AGVS. Buffers in manufacturing systems are required to reduce blocking and starving caused by breakdowns, variability in process times, and diversity of part routing. Due to the high per unit buffer cost, which primarily consists of floor space and equipment costs, the total capacity of buffers in and FMS is very limited. Proper buffer management can provide a high system efficiency. This paper presents a buffer management model for a multi-cell FMS with an AGVS and a simulation study to compare the proposed model to a conventional buffer management model in a job shop FMS.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.5
• /
• pp.527-537
• /
• 1990

This paper describes an intelligent control-based job scheduler, named ESIJOBS, for flexible manufacturing system. In order to construct rulebase of this system, traditional rules of job scheduling in FMS are examined and evaluated. This result and the repetitional simulations with graphic monitoring system are used to form the rulebase of ESIJOBS, which is composed of three parts:six part selection rules, four machine center selection rules, and twenty-one metarules. Appropriate scheduling rule sets are selected by this rulebase and manufacturing system status. The performances of all simulations are affected by random breakdowns of major FMS components during each simulation. Six criteria are used to evaluate the performance of each scheduling. The two modes of ESIJOBS are simulated and compared with combinational 24 rule-set simulations. In this comparison ESIJOBS dominated the other rule-set simulations and showed the most excellent performance particularly in three criteria.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.195-202
• /
• 2015

Rotating equipment seldom fails without notice, so breakdowns can usually be predicted and avoided by watching for signs of failure. In this paper, We study case for rotary machine with a breakdown analysis. Also We analyze the solution of the safety and the future breakdown of the each rotary machine through vibration analysis using measurement data. The implementation of the measurement and the test results are discussed. The result with suggested method showed netter stable Condition Monitoring & Diagnostics.

• Korean System Dynamics Review
• /
• v.17 no.3
• /
• pp.51-90
• /
• 2016

Learning is naturally embedded in organizational ongoing-processes and routines. Recent many research models of organizational failure ignore how failing masks breakdowns and recoveries of organization-embedded learning as a naturally occurring process. Organizational learning is the platform in tandem with base-modules of organization in this point. Organizations learn and unlearn while they acquire, discard, and forget organizational experiences or knowledges. These processes in public sector organizations are different from learning behaviors in private sector. This study expects to explore architectural components of learning organization in public sector, focusing on distinct characteristics of public organizations, and to implement learning model based on system thinking(system dynamic) approach.

• IE interfaces
• /
• v.6 no.2
• /
• pp.53-65
• /
• 1993

This paper deals with the development of a software module for production planning and scheduling activities of an existing Flexible Machining and Assembly System (FMAS). The Production Planning Module uses the hierarchical and sequential scheme based on "divide and conquer" philosophy. In this module, routes are determined based on the production order, orders are screened, tools are allocated, and order adjustments are executed according to the allocated tools. The Scheduling Module allocates the resources, determines the task priority and the start and completion times of tasks. Re-scheduling can be done to handle unforeseen situations such as lumpy demands and machine breakdowns. Since all modules are integrated with a central database and they interface independently, it is easy to append new modules or update the existing modules. The result of this study is used for operating the real FMAS consisting of a machining cell with 2 domestic NC machines and a part feeding robot, an assembly cell with a conveyor and 3 robots, an inspection cell, an AGV, an AS/RS, and a central control computer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.363-369
• /
• 2017

This paper presents the experimental results related to soil ionization and electrical breakdown in a concentric hemispherical electrode system under lightning impulse voltages. Dynamic voltage-current and impedance-time characteristics of soil ionization were measured and analyzed. Also the electrical breakdowns of the soil gap were investigated. The time-lag to the peak current corresponds to the soil ionization propagation. The time of ionization propagation in wet sand is found to decrease with increasing the impulse currents. A drastic decrease in ground resistance was observed during the impulse current spreading in sand. The electrical breakdown appears at the wave tail of impulse voltage and results in a wide scatter in V-t curves. The voltage-current curves have a fan-like shape attributed to ionization processes which result in increasing current and decreasing voltage.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.284-286
• /
• 1994

This paper describes the dielectric characteristics of $SF_6$ gas in non-uniform electric filed under lightning under lightning impulse and oscillating impulse voltages. The breakdown voltage-time characteristics and the breakdown voltage-pressure characteristics are measured over a pressure range extending from 0.1 to 0.5 [MPa] fur the coaxial electrode with a needle protrusion. The curvature radius of needle protrusion is 0.3[mm]. Also, the growth of the predischarge is simultaneously observed. As a result the polarity effect is pronounced, and the breakdowns voltage under the oscillating impulse voltage are higher than those under the lightning impulse voltage. It is found that the breakdown mechanism md predischarge phenomena ate closely related with the polarity and waveforms of the testing voltage.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.346-353
• /
• 2013

Industrial processes need to be monitored in real-time based on the input-output data observed during their operation. Abnormalities in an induction motor should be detected early in order to avoid costly breakdowns. To early identify induction motor faults, this paper effectively estimates spectral envelopes of each induction motor fault by utilizing a linear prediction coding (LPC) analysis technique and an expectation maximization (EM) algorithm. Moreover, this paper classifies induction motor faults into their corresponding categories by calculating Mahalanobis distance using the estimated spectral envelopes and finding the minimum distance. Experimental results shows that the proposed approach yields higher classification accuracies than the state-of-the-art approach for both noiseless and noisy environments for identifying the induction motor faults.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.292-299
• /
• 2018

In a survey in which farmers were asked about their levels of satisfaction with agricultural machines, Japanese products scored higher than local products by 1.2, 1.3, and 1.4 times for tractors, combine harvesters, and rice transplanter, respectively. Japanese products corresponded to generally high satisfaction levels in terms of operating performance, operability, frequency of breakdowns, and durability, excluding sales price and after-sales services. Effective countermeasures through quality improvement are therefore necessary for Korean products. Furthermore, a survey of dealers showed that the components and consumables for core agricultural machines had high frequencies of breakdowns and repairs. Four major components of tractors represented 85.3% of all breakdowns and repairs, five components of combine harvesters represented 89.6%, and three components of rice transplanters represented 80.5%. Moreover, a comparison of the technological levels between local and imported machines showed that the local machines' levels were at 60-100% for tractors, 70-100% for combine harvesters, and 70-95% for rice transplanters. Small and mid-sized tractors, 4 interrow combine harvesters, and 6 interrow rice transplanters showed similar levels of technology. The results of the analysis suggest that action is urgently needed at a policy level to establish an agricultural machinery component research center for the development, production, and supply of commonly-used components, with the participation of manufacturers of agricultural machines and components, in order to enhance the competitiveness of local manufacturers and to revitalize the agricultural machine market.