• 신재생에너지
• /
• 제8권3호
• /
• pp.38-46
• /
• 2012

Enhanced Geothermal System (EGS) among geothermal system types enables to produce sustainable energy even in non-volcanic region while conventional geothermal energy has been restricted to obtain only from hot and permeable formation such as in volcanic regions. Successful EGS project in terms of economy, however, can be expected only when the project is managed effectively considering most of influencing factors (e.g., tangible and intangible resources, cost, time, risks, etc.). In particular, well construction is of the utmost importance in geothermal project as it dominantly influences on time and cost in the whole project. Therefore, when it comes to viable geothermal project without abundant experience, managing drilling economically and efficiently is inevitable. In this study, a project management system for well construction in geothermal project based on project control system including work breakdown structure and cost account was developed to predict and assess the performance of drilling and to visualize the progress.

• 한국건축시공학회지
• /
• 제7권2호통권24호
• /
• pp.67-76
• /
• 2007

The purpose of this study is to propose the efficient improvement in the lawsuit to request the guarantee against defect. This study points out several problems about related act and subordinate statue and judgement by analyzing the character of contract in apartment house, related laws and regulations, appraisals and judicial decisions. This study deduces the necessity of the establishment of the specification and the breakdown cost for repair and maintenance work to provide the standard for the detached judgement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1481-1486
• /
• 2008

To apply more effective the RCM analysis for railway vehicle, the maintenance cost per equipment should be considered together with failure criticality per equipment considered in existing. This paper is described the systematic calculation of maintenance cost considering the RCM analysis of railway vehicle. To calculate the maintenance cost systematically, the cost breakdown structure was established, and basic cost information and calculated cost items were defined. In addition, the linking between calculated cost and RCM analysis was considered. In future, this proposal would be used to analysis of cost effectiveness through RCM analysis of railway vehicle.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.35-38
• /
• 2009

The high temperature superconducting(HTS) power cable, as a key component of the next generation power transmission system, operates cost-effectively because of much less transmission loss. Currently, a world-wide research has been undertaken actively. In this research, we designed insulation thickness and investigated thickness effect of laminated polypropylene paper(LPP) which is insulation material of HTS cable in case of AC and impulse breakdown.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2007년도 International Conference
• /
• pp.1023-1029
• /
• 2007

우리는 국가 경쟁력의 한 분야인 사업관리에 있어 계획, 수행, 성과관리, 개선에 최적의 프로세스 보유가 요구된다. 그러나 Project관리체계의 현 실태는 일정관리, 범위관리, 비용관리에 초점을 맞춘 일정관리체계, WBS(Work Breakdown Structure) 및 OBS(Organizational Breakdown Structure)관리, 비용관리체계의 부분 통합 혹은 서로의 연계 정도이다. 본 연구는 최적의 사업관리를 위하여 계약관리에 체계공학을 연계하여 계약 전에 WBS, IMP/IMS(Integrated Master Plan)/(Integratcd Master Schedule), TPM(Technical Performance Measurement) 등의 SEP(Systems Engineering Plan)와 계약 후의 이행을 검증 할 수 있는 과정의 Guideline을 제시하고, IEEE 1220, ANSI/EIA 632 순기 의거 개념설계부터 통합시험에 이르는 체계공학 순기에 따른 비용예측이 가능한 USC(University of Southern CalIfornia) 대학의 COSYSMO (Constructive Systems Engineering Cost ModeI)를 소개하고 적용 가능성을 고찰하며, Project의 전순기에 걸쳐 TPM 혹은 Quality를 비용과 일정에 통합하여 관리하는 PBEV(Performance Based Earned Value)모델을 소개하고 적용 가능성을 제시한다. Project 관리에 있어 System 차원을 강조한 SE(Systems Engineering), 비용예측의 CM(Cost Management), 성과관리를 위한 EVM(Earned Value Management)의 통합은 사업 관리에 역량을 강화하며 경쟁력을 향상 시킬 수 있는 적절한 접근으로 사료된다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.791-800
• /
• 2013

국내 도로 건설사업의 사업초기단계에서의 개략공사비 산정은 예비타당성조사, 도로업무편람, 투자평가지침에서 제시하는 도로의 평균단가 또는 표준단가를 기준으로 도출되는데 이는 공사비 산정 표준체계 부재 및 기초자료 갱신 평균단가를 적용하여 공사비를 산출하는 방식으로 본 연구의 대상인 특수 교량공사의 특성을 전부 반영하기에 미흡한 실정이다. 또한, 신속한 의사결정이나 대안선택이 결정되는 설계단계에서 소모적이고 획일적인 공사비 산정방식의 한계점을 개선하고 사업초기단계의 개략공사비산정 프로세스의 효율성 및 신뢰도를 높이기 위한 새로운 공사비 산정 모델을 개발이 요구된다. 이에 본 연구에서는 평균건설단가를 적용하여 개략 공사비를 산출하는 기존 방식에서 벗어나 대표공종 기반의 상세물량입력 모델을 구축하였다. 실적 공사비 데이터 및 공종별 원가자료를 기반으로 토목공사 수량산출 지침서 기준 전체 공종내역 중 공사비 누적비율 대비 95%이상을 차지하는 대표적인 공종을 도출하였다. 상부면적당 대표공종기반 단위물량 및 차로수별 공사비단가를 제시하고, 이를 활용하여 교량형식별로 상부면적당 공사비단가를 도출 및 검증을 통해 사업초기단계에서 업무추진 의사결정의 신뢰적 지원 및 효율적인 공사비 산정방식을 도출 하였다.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.785-789
• /
• 2013

Silicon Carbide (SiC) is the material with the wide band-gap (3.26 eV), high critical electric field (~2.3 MV/cm), and high bulk electron mobility (~900 $cm^2/Vs$). These electronic properties allow attractive features, such as high breakdown voltage, high-speed switching capability, and high temperature operation compared to Si devices. In general, device design has a significant effect on the switching and electrical characteristics. It is known that in this paper, we demonstrated that the switching performance and breakdown voltage of IGBT is dependent with doping concentration of p-base region and drift layer by using 2-D simulations. As a result, electrical characteristics of SiC-IGBT deivce is higher breakdown voltage ($V_B$= 1,600 V), lower on-resistance ($R_{on}$= 0.43 $m{\Omega}{\cdot}cm^2$) than Si-IGBT. Also, we determined that processing time and cost is reduced by the depth of n-drift region of IGBT was reduced.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.97-101
• /
• 2009

The use of a filler material in epoxy composite materials is an essential condition for reducing the unit cost of production and reinforcing mechanical strength. However, the dielectric strength of insulators decreases rapidly due to interactions between the epoxy resin and filler particles. In contrast to existing composite materials, nano-composite materials have superior dielectric strength, mechanical strength, and enduring chemical properties due to an increase in the bond strength of the polymer and nano material, It is reported that nano-fillers provide new characteristics different from the properties of the polymer material. This study is to improve the insulation capability of epoxy resins used in the insulation of a power transformer apparatus and many electronic devices mold. To accomplish this, the additional amount of nano-$SiO_2$ to epoxy resin was changed and the epoxy/$SiO_2$ nano composite materials were made, and the fundamental electrical properties were investigated using a physical properties and an analysis breakdown test. Using allowable breakdown probability, the optimum breakdown strength for designing an electrical apparatus was determined. The results found that the electrical characteristics of the nano-$SiO_2$ content specimens were superior to the virgin specimens. The 0.4 wt% specimens showed the highest electrical properties among the specimens examined with an allowable breakdown probability of 20 %, which indicates stable breakdown strength in insulating machinery design.

• 한국전산구조공학회논문집
• /
• 제36권6호
• /
• pp.381-389
• /
• 2023

BIM에서 가장 중요한 요소 중의 하나가 디지털 데이터이다. 체계적인 디지털 데이터 관리를 위해 최근까지 연구를 통해 객체분류체계(OBS)와 속성분류체계(Pset)가 제시되어 왔다. 특히 공정 및 기성 관리에 사용되는 디지털 데이터는 WBS와 CBS로 나뉘고 이를 BIM 객체와 매핑하려면 CBS의 수량 분개가 필요한데 CBS는 양이 매우 방대하고 공종이나 규격, 명칭 및 CBS 코드가 발주처마다 상이하여 WBS나 BIM 모델에 맞는 수량 분개 작업을 엑셀 등을 이용해서 수작업으로 한다는 것은 사실상 어렵다. 이러한 문제점을 극복하기 위해 BIM 모델에 의해 산출하기 힘든 수량 중에서 대부분을 차지하는 연장에 근거한 수량의 전체분을 분개하는 방안, 축적된 WBS-CBS 이력으로부터 최적 CBS를 도출하는 방안과 합리적인 CBS 데이터베이스 구축을 위해 필수적인 CBS 코드 통합 표준화 방안을 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.235-236
• /
• 2016

The importance of construction management has been increasing due to the fact that complex construction projects blend several different industries depending on the traits of the construction. This research was conducted to search for a method to enhance efficiency in cost management of construction project and meet the need for reusability of accumulated construction information. The process of detailed estimation and methodology for using standard unit price information has been developed to strengthen the interoperability in cost information by utilizing a standard classification system. The concept of ontology is proposed as a method of connecting construction information based on a standard breakdown structure to increasing the connectivity of the cost information in the construction project. Therefore, construction information knowledge framework is developed in order to improve the efficiency of the detailed estimation work process.