• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.76-81
• /
• 2002

In order to study the fatigue crack and retardation mechanism in variable loading, the effects of crack tip branching in crack growth retardation were examined. The characteristics of crack tip branching behavior were considered with respect to microstructure and crack tip branching angle was examined. Crack tip branching was observed along the grain boundary of finite and pearlite structure. It was found that the branching angle ranges from 25 to 53 degrees. Using the finite element method, the variable of crack driving farce to branching angle was examined. The effective crack driving farce (K$\_$eff/) decreased as the branching angle increased. The rate of decrease was 33% for kinked type and 29% for forked one. It was confirmed that the effect of crack tip branching is a very important factor in crack growth retardation. Therefore, crack branching effect should be considered in building the hypothetical model to predict crack growth retardation.

• International Journal of CAD/CAM
• /
• v.8 no.1
• /
• pp.21-28
• /
• 2009

In the present work, an attempt has been made to construct branching surface from 2-D contours, which are given at different layers and may have branches. If a layer having more than one contour and corresponds to contour at adjacent layers, then it is termed as branching problem and approximated by adding additional points in between the layers. Firstly, the branching problem is converted to single contour case in which there is no branching at any layer and the final branching surface is obtained by skinning. Contours are constructed from the given input points at different layers by energy-based B-Spline approximation. 3-D curves are constructed after adding additional points into the contour points for all the layers having branching problem by using energy-based B-Spline formulation. Final 3-D surface is obtained by skinning 3-D curves and 2-D contours. There are three types of branching problems: (a) One-to-one, (b) One-to-many and (c) Many-to-many. Oneto-one problem has been done by plethora of researchers based on minimizations of twist and curvature and different tiling techniques. One-to-many problem is the one in which at least one plane must have more than one contour and have correspondence with the contour at adjacent layers. Many-to-many problem is stated as m contours at i-th layer and n contours at (i+1)th layer. This problem can be solved by combining one-to-many branching methodology. Branching problem is very important in CAD, medical imaging and geographical information system(GIS).

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.126-136
• /
• 1999

We studied on crack growth retardation in single overloading condition. Crack tip branching which as the second mechanism on crack growth retardation was examined. Crack tip branching was observed to kinked type and forked type. It was found that the branching angle range was from 25 to 53 degree. The variations of crack driving force with branching angle were calculated with finite element method The variation of {{{{ KAPPA _I}}}}, {{{{ KAPPA _II}}}} and total crack driving force(K) were examined respectively So {{{{ KAPPA _I}}}}, {{{{ KAPPA _II}}}} and K mean to mode I, II and total crack driving force. Present model(Willenborg's model) for crack growth retardation prediction was modified to take into consideration the effects of crack tip branching When we predicted retardation with modified model. it was confirmed that predicted and experimental results coincided with well each other.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.833-839
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene was investigated by small angle light scattering and comparison was made with Ziegler-Natta linear low density polyethylene. The special efforts were made to find out the effects of branching number, length of branching and co-monomer content of m-LLDPE on the crystallization behavior of m-LLDPE. It was found that m-LLDPE has longer induction time to start crystallization from the amorphous state than that of conventional LLDPE with similar branching number, but the rate of crystallization seems not change much in both LLDPEs. Lowering of branching number in m-LLDPE resulted in both increasing of rate of crystallization and reducing induction time to crystallize. In general, the maximum size of spherulites of m-LLDPE is bigger than that of conventional LLDPE.

• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.117-124
• /
• 1997

This study was carried out to investigate the growth and branching pattern of stolons at Korean lawn(Zoysia japonica Steud.) in the field condition. The results were summarized as follows ; 1.About 80% of observed lawns had one primary stolon. Among the lawns with several primary stolons, 30% of them had two primary stolons, 63% had three, and 7% had four. 2.The angles between the primary stolon and the shoot were increased from 0˚ to 52˚ according to the node order from the terminal shoot apex, and reached maximum angle at the 7th node. 3.The internode length was the longest in the middle position of stolon, and its growing rate which depends on months was increased from May to September. 4.The branching angles between primary and secondary stolon were from 44˚ to 53˚ in each node. The average left branching angle was about 48.20, right branching angle 47.8˚, and the total average branching angle was 48.00. 5.The rate of initial brabch was the highest at the 10th node in May, the 7th node in July and the 5th node in September. But, the initial branching rate at the 7th node in July was higher than any other that at the 10th node in May and the 5th node in September. 6.The distribution rate of secondary stolon in each node of primary stolon was the highest at the 7th node. 7.when the terminal shoot apex of primary stolon was damaged mechanically, the branching rate at the first node after the damaged region was highly increased to 62%. The results of this study may be suggested that the secondary stolon begins to branch with the angle of 480 from the 7th node of the normal primary stolon, and those may be used as a basic data for the branching simulation in lawn.

• Journal of Veterinary Science
• /
• v.25 no.2
• /
• pp.32.1-32.14
• /
• 2024

Background: Aortic arch (AA) branching patterns vary among different mammalian species. Most previous studies have focused on dogs, whereas those on raccoon dogs remain unexplored. Objectives: The objective of this study was to describe the AA branching pattern in raccoon dogs and compare their morphological features with those of other carnivores. Methods: We prepared silicone cast specimens from a total of 36 raccoon dog carcasses via retrograde injection through the abdominal aorta. The brachiocephalic trunk (BCT) branching patterns were classified based on the relationship between the left and right common carotid arteries. The subclavian artery (SB) branching pattern was examined based on the order of the four major branches: the vertebral artery (VT), costocervical trunk (CCT), superficial cervical artery (SC), and internal thoracic artery (IT). Results: In most cases (88.6%), the BCT branched off from the left common carotid artery and terminated in the right common carotid and right subclavian arteries. In the remaining cases (11.4%), the BCT formed a bicarotid trunk. The SB exhibited various branching patterns, with 26 observed types. Based on the branching order of the four major branches, we identified the main branching pattern, in which the VT branched first (98.6%), the CCT branched second (81.9%), the SC branched third (62.5%), and the IT branched fourth (52.8%). Conclusions: The AA branching pattern in raccoon dogs exhibited various branching patterns with both similarities and differences compared to other carnivores.

• Journal of KIISE:Databases
• /
• v.32 no.4
• /
• pp.452-472
• /
• 2005

We propose XIR-Branching, a novel method for processing partial match queries on heterogeneous XML documents using information retrieval(IR) techniques and novel instance join techniques. A partial match query is defined as the one having the descendent-or-self axis '//' in its path expression. In its general form, a partial match query has branch predicates forming branching paths. The objective of XIR-Branching is to efficiently support this type of queries for large-scale documents of heterogeneous schemas. XIR-Branching has its basis on the conventional schema-level methods using relational tables(e.g., XRel, XParent, XIR-Linear[21]) and significantly improves their efficiency and scalability using two techniques: an inverted index technique and a novel prefix match join. The former supports linear path expressions as the method used in XIR-Linear[21]. The latter supports branching path expressions, and allows for finding the result nodes more efficiently than containment joins used in the conventional methods. XIR-Linear shows the efficiency for linear path expressions, but does not handle branching path expressions. However, we have to handle branching path expressions for querying more in detail and general. The paper presents a novel method for handling branching path expressions. XIR-Branching reduces a candidate set for a query as a schema-level method and then, efficiently finds a final result set by using a novel prefix match join as an instance-level method. We compare the efficiency and scalability of XIR-Branching with those of XRel and XParent using XML documents crawled from the Internet. The results show that XIR-Branching is more efficient than both XRel and XParent by several orders of magnitude for linear path expressions, and by several factors for branching path expressions.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.83-89
• /
• 1997

In order to study on fatigue crack retardation and retardation mechanism in variable loading, the effects of crack tip branching in fatigue crack growth retardation were examined. The characteristics of crack tip banching behavior was considered to micro structure. It was examined that the variation of crack tip branching angle. Crack tip branching was observed along the grain boundary of ferrite and pearlite structure. It was found that the abanching angle ranges from 25 to 53 degrees. Using the finite element method, the variable of crack driving force to branching angle was examined. The effective crack driving force ( $K_{\eff}$ ) decreased as the braching angle increases. The rate of decrease was 33% for the kinked type and 29% for the forked one. It was confirmed that the effect of crack tip branching is a very important factor in fatigue crack growth retardation. Therefore, crack branching effect should be considered building the hypoth- etical model to predict crack growth retardation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.2
• /
• pp.123-134
• /
• 2000

This paper addresses a new triangulation method for constructing surface model from a set of wire-frame contours. The most important problem of contour triangulation is the branching problem, and we provide a new solution for the double branching problem, which occurs frequently in real data. The multiple branching problem is treated as a set of double branchings and an algorithm based on contour merging is developed. Our double branching algorithm is based on partitioning of root contour by Toussiant's polygon triangulation algorithml[14]. Our double branching algorithm produces quite natural surface model even if the branch contours are very complicate in shape. We treat the multiple branching problem as a problem of coarse section sampling in z-direction, and provide a new multiple branching algorithm which iteratively merge a pair of branch contours using imaginary interpolating contours. Our method is a natural and systematic solution for the general branching problem of contour triangulation. The result shows that our method works well even though there are many complicated branches in the object.

• Journal of Bio-Environment Control
• /
• v.6 no.2
• /
• pp.86-91
• /
• 1997

This study was conducted to improve group production structure of green pepper in greenhouse. Plant was trained 45$^{\circ}$ branching, erection after 45$^{\circ}$ branching and erection. Light absorption index was calculated to investigate relation of light intensity and leaf area in different plant type according to plant height. Group production structure was analyzed with relative light intensity and dry weight of plant. In total growing seasons, group production structures were good in order of erect type after 45$^{\circ}$ branching > erect type > 45$^{\circ}$ branching type in view of light absorption, leaf and stem distribution. Plant height of erect type was taller than any other case, and average node length of 45$^{\circ}$ branching type was shorter than any other case. But stem diameter, leaf area, fresh weight and dry weight of erect type after 45$^{\circ}$ branching were superior to any other case. Yield is order of erect type after 45$^{\circ}$ branching > 45$^{\circ}$ branching type > erect type.