• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.111-127
• /
• 2020

The goal of this study is to fill this apparent gap in the area about investigating the effect of porosity distributions on vibrational behavior of FG sectorial plates resting on a two-parameter elastic foundation. The response of the elastic medium is formulated by the Winkler/Pasternak model. The internal pores and graphene platelets (GPLs) are distributed in the matrix either uniformly or non-uniformly according to three different patterns. The model is proposed with material parameters varying in the thickness of plate to achieve graded distributions in both porosity and nanofillers. The elastic modulus of the nanocomposite is obtained by using Halpin-Tsai micromechanics model. The annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. The 2-D differential quadrature method as an efficient and accurate numerical approach is used to discretize the governing equations and to implement the boundary conditions. The convergence of the method is demonstrated and to validate the results, comparisons are made between the present results and those reported by well-known references for special cases treated before, have confirmed accuracy and efficiency of the present approach. It is observed that the maximum vibration frequency obtained in the case of symmetric porosity and GPL distribution, while the minimum vibration frequency is obtained using uniform porosity distribution. Results show that for better understanding of mechanical behavior of nanocomposite plates, it is crucial to consider porosities inside the material structure.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3923-3926
• /
• 2015

Background: Lung cancer is a fatal malignancy with high mortality and short survival time. The aim of this study was to estimate survival rates of Iranian patients with lung cancer and its associate predictive factors. Materials and Methods: The study was conducted on 355 patients admitted to hospitals of West Azerbaijan in the year 2007. The patients were followed up by phone calls until the end of June 2014. The survival rate was estimated using the Kaplan-Meier method and log-rank test for comparison. The Cox's proportional hazard model was used to investigate the effect of various variables on patient survival time, including age, sex, Eastern Cooperative Oncology Group (ECOG) performance, smoking status, tumor type, tumor stage, treatment, metastasis, and blood hemoglobin concentration. Results: Of the 355 patients under study, 240 died and 115 were censored. The mean and median survival time of patients was 13 and 4.8 months, respectively. According to the results of Kaplan-Meier method, 1, 2, and 3 years survival rates were 39%, 18%, and 0.07%, respectively. Based on Cox regression analysis, the risk of death was associated with ECOG group V (1.83, 95% CI: 1 Conclusions: The survival time of the patients with lung cancer is very short. While early diagnosis may improve the life expectancy effective treatment is not available.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.271-277
• /
• 2017

PURPOSE. This in vitro study aimed to evaluate the effect of implant connection design (external vs. internal) on the fit discrepancy and torque loss of zirconia and titanium abutments. MATERIALS AND METHODS. Two regular platform dental implants, one with external connection ($Br{\aa}nemark$, Nobel Biocare AB) and the other with internal connection (Noble Replace, Nobel Biocare AB), were selected. Seven titanium and seven customized zirconia abutments were used for each connection design. Measurements of geometry, marginal discrepancy, and rotational freedom were done using video measuring machine. To measure the torque loss, each abutment was torqued to 35 Ncm and then opened by means of a digital torque wrench. Data were analyzed with two-way ANOVA and t-test at ${\alpha}=0.05$ of significance. RESULTS. There were significant differences in the geometrical measurements and rotational freedom between abutments of two connection groups (P<.001). Also, the results showed significant differences between titanium abutments of internal and external connection implants in terms of rotational freedom (P<.001). Not only customized internal abutments but also customized external abutments did not have the exact geometry of prefabricated abutments (P<.001). However, neither connection type (P=.15) nor abutment material (P=.38) affected torque loss. CONCLUSION. Abutments with internal connection showed less rotational freedom. However, better marginal fit was observed in externally connected abutments. Also, customized abutments with either connection could not duplicate the exact geometry of their corresponding prefabricated abutment. However, neither abutment connection nor material affected torque loss values.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.1
• /
• pp.145-152
• /
• 2015

Barriers to health seeking constitute a challenging issue in the treatment of breast cancer. The current meta-synthesis aimed to explore common barriers to health seeking among Malaysian breast cancer patients. From the systematic search, nine studies were found meeting the inclusion criteria. Data extraction revealed that health behavior towards breast cancer among Malaysia women was influenced by knowledge, psychological, sociocultural and medical system factors. In terms of knowledge, most of the Malaysian patients were observed to have cursory information and the reliance on the information provided by media was limiting. Among psychological factors, stress and sense of denial were some of the common factors leading to delay in treatment seeking. Family member's advice, cultural beliefs towards traditional care were some of the common sociocultural factors hindering immediate access to advanced medical diagnosis and care. Lastly, the delay in referral was one of the most common health system-related problems highlighted in most of the studies. In conclusion, there is an immediate need to improve the knowledge and understanding of Malaysian women towards breast cancer. Mass media should liaise with the cancer specialists to disseminate accurate and up-to-date information for the readers and audience, helping in modification of cultural beliefs that hinder timing health seeking. However, such intervention will not improve or rectify the health system related barriers to treatment seeking. Therefore, there is an immediate need for resource adjustment and training programs among health professional to improve their competency and professionalism required to develop an efficient health system.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.240-246
• /
• 2015

Anodic aluminum oxide (AAO) has been widely used for the development and fabrication of nano-powder with various morphologies such as particle, wire, rod, and tube. So far, many researchers have reported about shape control and fabrication of AAO films. However, they have reported on the shape control with different diameter and length of anodic aluminum oxide mainly. We present a combined mild-hard (or hard-mild) anodization to prepare shape-controlled AAO films. Two main parameters which are combination mild-hard (or hard-mild) anodization and run-time of voltage control are applied in this work. The voltages of mild and hard anodization are respectively 40 and 80 V. Anodization was conducted on the aluminum sheet in 0.3 mole oxalic acid at $4^{\circ}C$. AAO films with morphologies of varying interpore distance, branch-shaped pore, diameter-modulated pore and long funnel-shaped pore were fabricated. Those shapes will be able to apply to fabricate novel nano-materials with potential application which is especially a support to prevent volume expansion of inserted active materials, such as metal silicon or tin powder, in lithium ion battery. The silicon powder electrode using an AAO as a support shows outstanding cycle performance as 1003 mAh/g up to 200 cycles.

• Health Policy and Management
• /
• v.12 no.4
• /
• pp.56-67
• /
• 2002

The objectives of this study were to look into the present conditions and problems of smoking prevention programs for young people carried out by the Korean health insurance corporation(KHIC) and to provide the basic data for the governmental policy. In order to examine the actual achievements of existing smoking cessation programs, a survey was conducted over 235 KHIC branches. The person responsible for the cessation program from each branch responded to questionnaire sent by mail with regard to smoking cessation programs The survey shows the shortage of responsible persons. educational subjects were mainly elementary, middle school and high school students. The main educational method was to watch the video of which the content is the knowledge of smoking. but most of these videos were made for adults. Therefore, these videos are not appropriate for the children. 37% of these branches estimated the effectiveness of their program. On the basis of the survey data and analysis of current situations, the following actions are recommended in order to develop a more effective cessation program; first, the establishment of the effective administrative plan, second, the supplementation of the educator and the responsible person, third, the development of text books and videos which are appropriate for the children.

• Archives of Reconstructive Microsurgery
• /
• v.13 no.1
• /
• pp.51-57
• /
• 2004

Introduction: To cover the exposed tendons and bones in the foot and hand which need coverage and abundant vascular flow, lateral arm flaps were transferred. Lateral arm flap is a thin and innervated fasciocutaneous flap with a lower lateral cutaneous nerve and posterior radial collateral artery. Materials and methods: From October 1992 through September 2003, we have performed 5 lateral arm flaps for reconstruction of the exposed achilles tendons in 2 cases and the exposed forearm extensors, 2nd to 5th metacarpal bones and scaphoid each 1 case. The causes were traffic accident in 2 cases and machinary injury in 3 cases. Age range was between 31 to 74 (average 50) and all male except 1. Posterior lateral collateral artery and venae comitantes were anastomosed by end to end in 3 cases and vena comitante in 2 cases. Lower lateral cutaneous nerve was anastomosed with a branch of superficial radial nerve in 2 cases. Results: The results were evaluated by survival of the flap, sensory discrimination, cosmesis and comfort in the activities of the daily living. All flaps were survived. Sensory recovery was graded as deep cutaneous pain sensibility in 2 cases. Cosmesis was moderately satisfied and comfort was good except 1 as moderate. Postoperative defatting procedure was done in 1 case and skin abrasion was occurred in 1 case. Conclusion: Lateral arm flap was suitable for coverage of the exposed achilles tendons and exposed forearm extensors, metacarpals and scaphoid in the wrist.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.1
• /
• pp.18-24
• /
• 2018

Objectives: Foreign bodies (FBs) account for 3.8% of all pathologies of the head and neck region, and approximately one third of them are missed on initial examination. Thus, FBs represent diagnostic challenges to maxillofacial surgeons, rendering it necessary to employ an appropriate imaging modality in suspected cases. Materials and Methods: In this cross-sectional study, five different materials, including wood, metal, glass, tooth and stone, were prepared in three sizes (0.5, 1, and 2 mm) and placed in three locations (soft tissue, air-filled space and bone surface) within a sheep's head (one day after death) and scanned by panoramic radiography, cone-beam computed tomography (CBCT), and ultrasonography (US) devices. The images were reviewed, and accuracy of the detection modalities was recorded. The data were analyzed statistically using the Kruskal-Wallis, Mann-Whitney U-test, Friedman, Wilcoxon signed-rank and kappa tests (P<0.05). Results: CBCT was more accurate in detection of FBs than panoramic radiography and US (P<0.001). Metal was the most visible FB in all of modalities. US was the most accurate technique for detecting wooden materials, and CBCT was the best modality for detecting all other materials, regardless of size or location (P<0.05). The detection accuracy of US was greater in soft tissue, while both CBCT and panoramic radiography had minimal accuracy in detection of FBs in soft tissue. Conclusion: CBCT was the most accurate detection modality for all the sizes, locations and compositions of FBs, except for the wooden materials. Therefore, we recommend CBCT as the gold standard of imaging for detecting FBs in the maxillofacial region.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.2
• /
• pp.70-76
• /
• 2017

The purpose of this study was to perform a literature review of short implants in the posterior maxilla and to assess the influence of different factors on implant success rate. A comprehensive search was conducted to retrieve articles published from 2004 to 2015 using short dental implants with lengths less than 10 mm in the posterior maxilla with at least one year of follow-up. Twenty-four of 253 papers were selected, reviewed, and produced the following results. (1) The initial survival rate of short implants in the posterior maxilla was not related to implant width, surface, or design; however, the cumulative success rate of rough-surface short implants was higher than that of machined-surface implants especially in performance of edentulous dental implants of length <7 mm. (2) While bone augmentation can be used for rehabilitation of the atrophic posterior maxilla, short dental implants may be an alternative approach with fewer biological complications. (3) The increased crown-to-implant (C/I) ratio and occlusal table (OT) values in short dental implants with favorable occlusal loading do not seem to cause peri-implant bone loss. Higher C/I ratio does not produce any negative influence on implant success. (4) Some approaches that decrease the stress in posterior short implants use an implant designed to increase bone-implant contact surface area, providing the patient with a mutually protected or canine guidance occlusion and splinting implants together with no cantilever load. The survival rate of short implants in the posterior edentulous maxilla is high, and applying short implants under strict clinical protocols seems to be a safe and predictable technique.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.211-216
• /
• 2014

Using a high-rise building water piping after hydrostatic test of the reliability of the leak to be completed if the pressure is maintained until the leak is not commercially available considered. Due to the nature of high-rise buildings and the construction period will take several years from the lower levels of use of the water supply and fire fighting water pipe construction is in progress, the order of which I do most of the first pipe to the construction and more than three years. So kind of riser pipe is complete, install the valve in the basement by installing an automatic pump to maintain a constant pressure after hydrostatic test and after each floor plumbing piping is complete, the progress of the hydrostatic test without undergoing a separate branch pipe the valve is opened automatically when the number of the pressing pressure of the structure. I kind of do and keep working pressure of pipe until the completion of the construction work to keep the damage to human error when it is intended to prepare. In winter, the frost protection and an alternative to drainage water pipe is damaged or deformed, even if unaware of the finishing work to the building, the use of the damage caused by a leak in a after construction of finish work to be expected. Alternative to reduce this damage if the pressure test without fear of freezing to help maintain long-term commercial pressures may be considered.