• Steel and Composite Structures
• /
• 제23권4호
• /
• pp.421-433
• /
• 2017

Experimental and numerical studies of a newly developed Reduced Beam Section (RBS) connection, called Tubular Web RBS connection (TW-RBS) have been recently conducted. This paper presents experimental and numerical results of extending the plastic hinge length on the beam flange to increase energy dissipation of a proposed version of the TW-RBS connection with two pipes, (TW-RBS(II)), made by replacing a part of flat web with two steel tubular web at the desirable location of the beam plastic hinge. Two deep-beam specimens with two pipes are prepared and tested under cyclic loads. Obtained results reveal that the TW-RBS(II) like its type I, increases story drift capacity up to 6% in deep beam much more than that stipulated by the current seismic codes. Based on test results, the proposed TW-RBS(II) helps to dissipate imposed energy up to 30% more than that of the TW-RBS(I) specimens at the same story drift and also reduces demands at the beam-to-column connection up to 30% by increasing plastic hinge length on the beam flange. The TW-RBS(II) specimens are finally simulated using finite element method showing good agreement with experimental results.

• Steel and Composite Structures
• /
• 제51권3호
• /
• pp.325-335
• /
• 2024

Yielding dampers exhibit varying cyclic behavior based on their geometry. These dampers not only increase the energy dissipation of the structure but also increase the strength and stiffness of the structure. In this study, parametric investigations were carried out to explore the impact of angled U-shape damper (AUSD) dimensions on its cyclic behavior. Initially, the numerical model was calibrated using the experimental specimen. Subsequently, analytical equations were presented to calculate the yield strength and elastic stiffness, which agreed with the experimental results. The outcomes of the parametric studies encompassed ultimate strength, effective stiffness, energy dissipation, and equivalent viscous damper ratio (EVDR). These output parameters were compared with similar dampers. Also, the magnitude of the effect of damper dimensions on the results was investigated. The results of parametric studies showed that the yield strength is independent of the damper width. The length and thickness of the damper have the greatest effect on the elastic stiffness. Reducing length and width resulted in increased energy dissipation, effective stiffness, and ultimate strength. Damper width had a more significant effect on EVDR than its length. On average, every 5 mm increase in damper thickness resulted in a 3.6 times increase in energy dissipation, 3 times the effective stiffness, and 3 times the ultimate strength of the model. Every 15 mm reduction in damper width and length increased energy dissipation by 14% and 24%, respectively.

• Fisheries and Aquatic Sciences
• /
• 제18권3호
• /
• pp.283-286
• /
• 2015

This is the first report of Pterygotrigla multiocellata from the family Triglidae, collected in Korea. The specimen (314 mm in standard length) was caught in a gill net in the coastal waters of Jeju Island on 11 February 2010. This species is characterized by the following morphological traits: head large and triangular, bony plates absent along the base of the second dorsal fin, antrorse rostral spine long, and cleithral spine long. We suggest a new Korean name, "Gin-ppul-mit-seong-dae" for P. multiocellata.

• Computers and Concrete
• /
• 제16권6호
• /
• pp.881-896
• /
• 2015

A simultaneous analytical, experimental and numerical analysis of crack initiation, propagation and breaking process of the Central Straight through Crack Brazilian Disk (CSCBD) specimens under diametrical compression is carried out. Brazilian disc tests are being accomplished to evaluate the fracturing process based on stress intensity factors (SIFs). The effects of crack inclination angle and crack length on the fracturing processes have been investigated. The same experimental specimens have been numerically modeled by a higher order indirect boundary element method (HDDM). These numerical results are compared with the existing experimental results proving the accuracy and validity of the proposed numerical method.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.36-41
• /
• 1998

The objective of this study is to investigate effects of prebuckling on the buckling of laminated composite cylindrical shells. axial compression is considered for laminated composite cylindrical shells with length to radius ratios. The shell walls are made of a laminate with several symmetric ply orientations. This study was made using finite difference energy method, utilizing the nonlinear bifurcation branch with nonlinear prebuckling displacements. The results are compared to the buckling loads determined when membrane prebuckling displacements are considered.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.49-58
• /
• 1997

The objective of this study is to investigate effects of prebuckling on the bucking of laminated compostie cylindrical shells, Both axial compression and lateral pressure are considered for laminated composite cylindrical shells with length to radius ratios. The shell walls are made of a laminate with several symmetric ply orientations. The study was using finite difference energy method, utilizing the nonlinear bifurcation branch with nonlinear prebuckling displacements. The results are compared to the buckling loads determined when membrane prebuckling displacements are considered.

• 경영과학
• /
• 제13권1호
• /
• pp.13-27
• /
• 1996

This paper considers the sequencing problem in mixed model assembly lines with hybrid workstation types and sequence-dependent setup times. Computation time is often a critical factor in choosing a method of determining the sequence. We develop a mathematical formulation of the problem to minimize the overall length of a line, and present a tabu search technique which can provide a near optimal solution in real time. The proposed technique is compared with a genetic algorithm and a branch-and-bound method. Experimental results are reported to demonstrate the efficiency of the technique.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.112-116
• /
• 1998

The objective of this study is to investigate effects of prebuckling on the buckling of laminated composite cylindrical shells. Axial compression is considered for laminated composite cylindrical shells with length to radius ratios. The shell walls are made of a laminate with several symmetric ply orientations. This study was made using finite difference energy method, utilizing the nonlinear bifurcation branch with nonlinear prebuckling displacements. The results are compared to the buckling loads determined when membrane prebuckling displacements are considered.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.863-866
• /
• 1999

In this paper, we designed a Viterbi decoder with constraint length K=7, code rate R=1/2, encoder generator polynomial (171, 133)$_{8}$. This decoder makes use of 3-bit soft decision. We designed the Viterbi decoder using VHDL. We employed conventional logic circuit instead of ROM for branch metric units(BMUs) to reduce the number of gates. We adopted fully parallel structures for add-compare-select units(ACSUs). The size of the designed decoder is about 200, 000 gates.s.

• 전자공학회논문지S
• /
• 제34S권9호
• /
• pp.13-22
• /
• 1997

In this paper, we supposed allocating the number of redundancies as the model of 0-1 knapsack problem and formulated the problem to maximize the systems reliability for a mission length. The formulated problem reduced the problem size using the modified branch and bound algorithm by Lagrangian relaxation. The subgradient method can optimize the set of solution. To verify the proposed method, we presented the improved resutls of the systems composed of two and ten component groups as the commparison of those in other papers.