• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.868-876
• /
• 2014

Arleigh Burke(DDG-51) and Sejong warship are AEGIS destroyer of US Navy and Korea Navy. These are designed to make more than 30knots by applying a COGAG(COmbined Gas turbine And Gas turbine) system. However, the gas turbine(LM2500) in this system has a low SFC (Specific Fuel Consumption) when the warship operated low speed. So, many kinds of companies are researching the HED(Hybrid Electric Drive) system to improve this problem. The purpose of this paper is to analyze the HED system and simulate by Sejong warship data. Serveral methods were used for that purpose. More specifically, the equipment modeling are employed for regression analysis by LabVIEW. As a result, it was found that the warship installed HED system could cut their fuel bills by as much as about 80,000,000won per year.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.13-19
• /
• 2015

Railway vehicle equipment goes back again to the state just before when failure by the repair. In repairable system, we are interested in the failure interval. As such, a statistical model of the point process, NHPP power law is often used for the reliability analysis of a repairable system. In order to derive a quantitative reliability value of repairable system, we analyze the failure data of the air brake system of the train line 7. The quantitative value is the failure intensity function that was modified, converted into a cost-rate function. Finally we studied the optimal number and optimal interval in which the costs to a minimum consumption point as cost-rate function. The minimum cost point was 194,613 (won/day) during the total life cycle of the braking system, then the optimal interval were 2,251days and the number of optimal preventive maintenance were 7 times. Additionally, we were compared to the cost of a currently fixed interval(4Y) and the optimum interval then the optimal interval is 3,853(won/day) consuming smaller. In addition, judging from the total life, "fixed interval" is smaller than 1,157 days as "optimal interval".

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.612-614
• /
• 2000

ABS(Anti-lock Braking System) is a device which prevents the lock-up of car wheels during emergency braking. It helps to maintain the steerability since the tire-road slip is controlled in an acceptable range. By maintaining the maximal frictional force during braking. ABS can reduce the braking distance. Recently, ABS is accepted as a standard equipment in vehicles, especially in commercial vehicles(bus and trucks). Commercial vehicles mostly use pneumatic pressure for braking. In this paper, ECU(Electronic Control Unit) for the anti-lock braking system of a commercial vehicle which is equipped with a full-air brake system and its control algorithms are presented.

• 유공압시스템학회논문집
• /
• 제7권2호
• /
• pp.7-12
• /
• 2010

In these days, the researches about hybrid and fuel cell electric vehicles are actively performed due to the environmental contamination and resource exhaust. Specially, the technology of regenerative braking, converting heat energy to electric energy, is one of the most effective technologies to improve fuel economy. This paper developed a regenerative braking control algorithm that is considered vehicle stability. The vehicle has a inline motor at front drive shaft and has a EHB(Electo-hydraulic Brake) system. The control logic and regenerative braking control algorithm are analyzed by MATLAB/Simulink. The vehicle model is carried out by CarSim and the driving simulation is performed by using co-simulation of CarSim and MATLAB/Simulink. From the simulation results, a regenerative braking control algorithm is verified to improve the vehicle stability as well as fuel economy.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.48-55
• /
• 2019

The Electronic Stability Program (ESP), a system that improves vehicle safety, also known as YMC (Yaw Motion Controller) or VDC (Vehicle Dynamics Control), is a system that operates in unstable or sudden driving and braking situations. Developing conditions such as unstable or sudden driving and braking situations in a vehicle are very dangerous unless you are an experienced professional driver. Additionally, many repetitive tests are required to collect reliable data, and there are many variables to consider such as changes in the weather, road surface, and tire condition. To overcome this problem, in this paper, hardware and control software such as the ESP controller, vehicle engine, ABS, and TCS module, composed of three control zones, are modeled using MATLAB/SIMULINK, and the vehicle, climate, and road surface. Various environmental variables such as the driving course were modeled and studied for the real-time ESP real-time simulator that can be repeatedly tested under the same conditions.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1720-1727
• /
• 2003

The object of this work is to develop the measurement method of the transmission error of the helical gears. For this purpose, experimental set up is designed by 3D CAD software. It consists of the motor, inverter, powdered brake equipment, torque sensor and helical gearbox. In this study, tangential linear accelerometers were used as the methods for the transmission error measurement. the acceleration signals are transmitted to the signal conditioners through the slip rings and the transmission errors are obtained by a specially designed circuit board. The transmission errors are analyzed in the frequency domain. As a result, The periodicity of the transmission error is confirmed in the mesh frequency and its harmonics. The magnitude of harmonic components is very dependent on the natural frequencies of the gear system. It usually increases with the rotational speed. However, it does not always increase with torque.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.71-78
• /
• 2017

The power train of hydro-mechanical continuously variable transmission (HMCVT) for 8-ton class forklift includes hydro-static units, hydraulic multi-wet disc brake & clutches and complex helical & planetary gears. The helical & planetary gears are key components of HMCVT's power train wherein strength problems are the main concerns including gear bending stress, gear compressive stress, and scoring failure. Many failures in power train gears of HMCVT are due to the insufficient gear strength and resonance problems caused by major excitation forces, such as gear transmission error of mating gear fair in the transmission. In this study, wherein excitation frequencies are the gear tooth passing frequencies of the mating gears, a Campbell diagram is used to calculate the power train gears' critical speeds. Mode shapes and natural frequencies of the power train gears are calculated by CATIA V5. These are used to predict resonance failures by comparing the actual working speed range with the critical speeds due to the gear transmission errors of HMCVT's power train gears.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.10-14
• /
• 2015

Due to the characteristics of the vehicle structure, the magnetic levitation train has a confined bottom space thus a study on miniaturization and weight reduction of auxiliary power unit is essential. This auxiliary power unit is an essential device used for illumination, air conditioning, heating and air brake equipment excluding the motor. The previous auxiliary power unit for magnetic levitation train has used the hard switching having a high switching frequency with heavy loss in order to reduce the size of filter reactor and transformer but the reduction in volume was not significant. In this paper, by reducing the loss, reducing the size of the cooling unit and by increasing the switching frequency using the soft switching of resonant converter, it has miniaturized and reduced the weight of filter reactor and transformer which occupy significant space in the auxiliary power unit. This study has verified the performance of 50KVA grade prototype through simulated interpretation and analysis, and compared the size and weight of auxiliary power unit of the previous magnetic levitation train.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.541-549
• /
• 2018

본 연구에서는 국내 화물 및 여객차량들을 견인하는 디젤전기 기관차의 제동에 따른 동적 거동을 분석하기 위하여 제동장치에 영향을 미치는 마찰계수, 제동압력, 주행저항 등을 시험하였다. 마찰계수는 UIC 541-4를 참고로 Dynamo 시험을 수행하였으며 시험결과는 다변량 회귀분석을 통해 제동하중, 제동초기 속도와의 관계를 분석하여 제시하였다. 제동압력은 상용제동과 비상제동으로 구분하였으며, 제동밸브와 배관의 특성을 반영하기 위하여 시간에 따른 제동압력 변화를 대상 차량에서 측정하였다. 차량에 작용하는 외력을 반영하기 위하여 EN 14067-4의 타행시험을 수행하고 2차 다항식 형태의 주행저항을 제시하였다. 도출한 주행저항을 동일 차종에 대하여 각 국가별로 사용하고 있는 주행저항들과 비교하였다. 차량의 재원, 마찰계수, 제동압력, 주행저항을 바탕으로 직선 평탄 선로를 주행하는 디젤전기기관차의 동적 거동을 EN 14531-1에서 제시된 시간적분을 이용하여 해석하였다. 해석 결과는 상용제동과 비상제동에 대하여 각각 차량의 속도이력 시험결과와 비교 검증하였으며 상당히 합리적인 결과를 도출하였다. 본 연구의 결과들은 철도차량들을 연결하여 운행하는 열차의 동적 거동해석에 활용할 수 있을 뿐 아니라 차량 설계에서 제동에 영향을 미치는 다양한 파라미터들을 분석하고 성능향상의 기초자료로 활용할 수 있을 것으로 기대된다.

• 한국융합학회논문지
• /
• 제3권4호
• /
• pp.35-44
• /
• 2012

본 연구에서 모사 프로그램이 6WD/6WS를 가진 특수 목적 차량의 비정상상태 코너링 성능을 조사하기 위해 개발되었다. 6WD 차량은 비포장 도로에서 작전을 수행하기 좋은 성능을 가지고 있고 안전한 성능을 가진 것으로 신뢰받고 있다. 그러나, 6WS 차량들의 코너링 성능은 관련 문헌을 통해서는 언뜻 이해가 어렵다. 본 논문에서는 6WD/6WS 차량들은 비선형 차량 동력학, 타이어 모델, 운동학적 효과 등을 포함한 18 자유도 시스템으로 모델링 되었다. 그리고 그 차량 모델은 입/출력과 차량변수가 수식화된 접근 방법으로 쉽게 변환될 수 있도록 MATLAB/SIMULINK를 사용한 모사 프로그램으로 구성되었다. 6WS 차량의 코너링 성능은 브레이크 휠과 피봇팅 각각으로 해석되었다. 모사 결과들을 보면, 코너링 성능은 전후 휠 조향 뿐만이 아니라 중간 휠 조향에 따라 좌우됨을 보여준다. 덧붙여, 새로운 6WS 제어법칙은 측면 미끄러짐 각을 최소화하기 위해 제안되었다. 차량변경 모사 결과들은 제안된 제어법칙의 6WS 차량의 장점을 보여준다.