• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.800-806
• /
• 2018

Software efficiency is the probability of failure free use in operating environments, and is the most fundamental factor affecting software system stability. The malfunction of the computer system used in the information technology field may cause a significant loss in the related industry. Therefore, in this study, we analyze the attributes of software reliability models that depend on various hazard functions based on finite fault NHPP model with software failure time data. The hazard function pattern of proposed model is constant for the Goel-Okumoto model, and the Minimax and Rayleigh models follow the incremental pattern, but the hazard function increase value of the Minimax model is smaller than that of the Rayleigh model and the Goel-Okumoto model. Also, the Minimax model was relatively efficient because the true value error of the mean value function m(t) and the mean square error (MSE) of the Minimax model were smaller than those of the Rayleigh and Goel-Okumoto models. The results of this study are expected to be useful for software developers as basic information about the hazard function.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.645-650
• /
• 2018

Software stability is the possibility of operating without any malfunction in the operating environment over time. In a finite failure NHPP for software failure analysis, the failure occurrence rate may be constant, monotonically increasing, or monotonically decreasing. In this study, based on the NHPP model and based on the software failure time data, we compared and analyzed the attributes of the software development cost model using the exponential distribution Rayleigh distribution and inverse exponential distribution considering the shape parameter of the Weibull distribution as the life distribution. The results of this study show that the Rayleigh model is the fastest release time and has the economic cost compared to the inverse-exponential model and the Goel-Okumoto model. Using the results of this study, it can be expected that software developers and operators will be able to predict the optimal release time and economic development cost.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.240-240
• /
• 2020

강우 시 우수관로 내부의 수리 거동(유속, 수위)에 영향을 미치는 대표적인 매개변수는 관로의 조도계수와 손실계수 등이 있다. 이 중 조도계수는 관로 내부의 퇴적 및 협잡물로 인한 조도높이 변화에 따른 관로 내의 수리학적 거동을 평가할 수 있는 매개변수이며 손실계수는 관로의 확대, 축소, 만곡 등에 의한 에너지 감쇄 효과에 따른 관로 내 수리학적 변화를 평가할 수 있는 매개변수이다. 본 연구에서는 서울시 주요 배수구역에 대해 관로 조도계수 및 손실계수 변화에 따른 수위, 유속 변동성을 SWMM으로 분석하였다. 연구에 적용한 대상 배수구역은 반포 02 (방배1), 안양천 13 (봉천1), 성내 05 (길동), 안양천 11(신림4), 반포 03 (방배2), 안양천 01 (오류1), 성내 03 (천호)로 총 7개 배수구역이다. 모형수행을 위한 조건으로 조도계수는 0.015 ~ 0.120 구간에 대해 0.003 단위로 증가시키며 총 12개 CASE를 적용하였으며 손실계수는 0.0 ~ 0.5 구간에 대해 0.1 단위로 총 6개 CASE를 적용하였다. 관로 수리특성에 따른 수심, 유속의 변화량 분석 결과는 관로 및 유역의 크기별로 변화의 폭이 매우 크므로 상자-수염그림(Box-whisker plot) 이용하여 중간값의 변화 정도를 검토하였다. 조도계수 증가에 따른 수심증가, 유속 감소치의 중간값을 분석한 결과 조도계수가 0.013에서 0.034로 증가 시 수심은 40.6% 증가하고 유속은 47.4% 감소하는 것으로 검토되었다(그림 1, 2). 한편, 손실계수 증가에 따른 수심증가, 유속 감소치의 중간값을 분석한 결과 조도계수가 0.0에서 1.6으로 증가시 수심은 15.7% 증가하고 유속은 15.0% 감소하는 것으로 검토되었다. 이상과 같은 연구의 성과는 우수관로 내부의 다양한 여건 변화가 강우 시 관로 내 수리특성에 미치는 영향을 판단하기 위한 기초 자료로 활용할 수 있으며 향후, 우수관로 모니터링 결과와 연계하여 유지관리 방안 수립에 활용할 수 있을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• v.85 no.4
• /
• pp.469-484
• /
• 2023

A deep recursive bidirectional Cuda Deep Neural Network Long Short Term Memory (Bi-CuDNNLSTM) layer is recruited in this paper to predict the entire force time histories, and the corresponding hysteresis and backbone curves of reinforced concrete (RC) bridge piers using experimental fast and slow cyclic tests. The proposed stacked Bi-CuDNNLSTM layers involve multiple uncertain input variables, including horizontal actuator displacements, vertical actuators axial loads, the effective height of the bridge pier, the moment of inertia, and mass. The functional application programming interface in the Keras Python library is utilized to develop a deep learning model considering all the above various input attributes. To have a robust and reliable prediction, the dataset for both the fast and slow cyclic tests is split into three mutually exclusive subsets of training, validation, and testing (unseen). The whole datasets include 17 RC bridge piers tested experimentally ten for fast and seven for slow cyclic tests. The results bring to light that the mean absolute error, as a loss function, is monotonically decreased to zero for both the training and validation datasets after 5000 epochs, and a high level of correlation is observed between the predicted and the experimentally measured values of the force time histories for all the datasets, more than 90%. It can be concluded that the maximum mean of the normalized error, obtained through Box-Whisker plot and Gaussian distribution of normalized error, associated with unseen data is about 10% and 3% for the fast and slow cyclic tests, respectively. In recapitulation, it brings to an end that the stacked Bi-CuDNNLSTM layer implemented in this study has a myriad of benefits in reducing the time and experimental costs for conducting new fast and slow cyclic tests in the future and results in a fast and accurate insight into hysteretic behavior of bridge piers.

• Structural Engineering and Mechanics
• /
• v.87 no.3
• /
• pp.221-229
• /
• 2023

Urbanization and industrialization have significantly increased the amount of solid waste produced in recent decades, posing considerable disposal problems and environmental burdens. The practice of waste utilization in concrete has gained popularity among construction practitioners and researchers for the efficient use of resources and the transition to the circular economy in construction. This study employed Lytag aggregate, an environmentally friendly pulverized fuel ash-based lightweight aggregate, as a substitute for natural coarse aggregate. At the same time, fly ash, an industrial by-product, was used as a partial substitute for cement. Concrete mix M20 was experimented with using fly ash and Lytag lightweight aggregate. The percentages of fly ash that make up the replacements were 5%, 10%, 15%, 20%, and 25%. The Compressive Strength (CS), Split Tensile Strength (STS), and deflection were discovered at these percentages after 56 days of testing. The concrete cube, cylinder, and beam specimens were examined in the explorations, as mentioned earlier. The results indicate that a 10% substitution of cement with fly ash and a replacement of coarse aggregate with Lytag lightweight aggregate produced concrete that performed well in terms of mechanical properties and deflection. The cementitious composites have varying characteristics as the environment changes. Therefore, understanding their mechanical properties are crucial for safety reasons. CS, STS, and deflection are the essential property of concrete. Machine learning (ML) approaches have been necessary to predict the CS of concrete. The Artificial Fish Swarm Optimization (AFSO), Particle Swarm Optimization (PSO), and Harmony Search (HS) algorithms were investigated for the prediction of outcomes. This work deftly explains the tremendous AFSO technique, which achieves the precise ideal values of the weights in the model to crown the mathematical modeling technique. This has been proved by the minimum, maximum, and sample median, and the first and third quartiles were used as the basis for a boxplot through the standardized method of showing the dataset. It graphically displays the quantitative value distribution of a field. The correlation matrix and confidence interval were represented graphically using the corrupt method.

• Smart Media Journal
• /
• v.13 no.6
• /
• pp.24-34
• /
• 2024

If the future can be predicted from network traffic data, which is a time series, it can achieve effects such as efficient resource allocation, prevention of malicious attacks, and energy saving. Many models based on statistical and deep learning techniques have been proposed, and most of these studies have focused on improving model structures and learning algorithms. Another approach to improving the prediction performance of the model is to obtain a good-quality data. With the aim of obtaining a good-quality data, this paper applies a dense sampling technique that augments time series data to the application of network traffic prediction and analyzes the performance improvement. As a dataset, UNSW-NB15, which is widely used for network traffic analysis, is used. Performance is analyzed using RMSE, MAE, and MAPE. To increase the objectivity of performance measurement, experiment is performed independently 10 times and the performance of existing sparse sampling and dense sampling is compared as a box plot. As a result of comparing the performance by changing the window size and the horizon factor, dense sampling consistently showed a better performance.

• Korean Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.283-293
• /
• 2008

The objectives of the study were firstly to provide fundamental data for establishment of total maximum daily load (TMDL) management in Ulsan City, and secondly to make practical application of stream health assessment with tolerance range by each species when physiochemical and fish investigations were carried out together. A total of 44 sites in Taehwa River, Hoiya River, Dong Stream, and Cheongryang Stream were selected to monitor water qualities seasonally and fish investigation was performed in August 2006. Among the parameters of water quality, biological oxygen demand (BOD) and dissolved oxygen (DO) related to respiration, total nitrogen (T-N) and total phosphorus (T-P) related to nutrient and eutrophication, and total suspended solids (TSS) and $NH_4$-N were compared with vertical box plot by 8 dominant species. According to the fish investigation, 12 families 33 species were found including endangered species (Pungitius kaibarae) and introduced species (Lepomis macrochirus, Micropterus salmoides), and appearance rate of Korean endemic species was greater in Taehwa River (29.2%) than others. As the results of tolerance range by species, Zacco koreanus, Rhynchocypris oxycephalus, Iksookimia longicorpa, and Squalidus gracilis majimae had limited low range by water quality parameters indicating preference of good water quality. Whereas, Carassius auratus and Pseudorasbora parva were found downstream and urban-streams which were exposed from frequent inflow of pollutants. It concludes that the results help distinguishing sensitive, intermediate, and tolerant species when we evaluate stream health assessment with fish, and further making practical application for conservation and restoration of aquatic ecosystem.

• Korean Journal of Ecology and Environment
• /
• v.48 no.4
• /
• pp.238-252
• /
• 2015

The effect of weir construction (2009~2011) was investigated on algal bloom dynamics and surrounding conditions in the Youngsan River by analyzing the long-term (2001~2014) data provided by the Water Information System, Ministry of Environment. The data include chlorophyll a and water properties such as total suspended solids (TSS), ammonium ($NH_4{^+}$), nitrate ($NO_3{^-}$), orthophosphate ($PO{_4}^{3-}$), total nitrogen (TN), total phosphorus (TP) and DIN/DIP molar ratio collected from 12 stations along the channel of the river. Temporal variations were examined using data collected monthly from 2001~2014 and Box-Whisker plot was used to examine the difference in algal bloom dynamics between before (2006~2008) and after (2012~2014) the weir construction. Pearson's correlation analysis was also used to analyze the correlation of parameters. The results showed that TSS affecting water turbidity increased during the construction but decreased especially at the stations located in the upper and middle regions of the river after the construction. Ammonium concentrations increased whereas the concentrations of other nutrients decreased after the construction inducing an increase in N:P molar ratio. Chlorophyll a decreased suddenly during the construction but increased clearly after the construction at the stations where TSS decreased. This indicates that algal blooms can develop in the Youngsan River due to a decrease in turbidity that increases light penetration in water column although the concentrations of nutrients such as orthophosphate were reduced after the weir construction.

• The Korean Journal of Mycology
• /
• v.34 no.1
• /
• pp.39-53
• /
• 2006

This studies investigated the effect of concentrations of sodium chloride (NaCl) on occurrence and growth of fruitbody in oyster mushrooms, Pleurotus spp. Our experiments divided into two parts. When the water contents in substrate were added with sodium chloride solution in cotton waste box cultivation as a first experiment, the growth of mushroom was damaged as the concentration was increased, even though there was a little difference according to the strains. The yield in 1.0% NaCl solution was decreased to 72% compared to non-treated plot while that in 3.0% solution was only 2% of the non-treated plot. Morphological characteristics of mushrooms cultivated in substrate with the different concentration of the solution showed different results. For example, the size and thickness of pilei were not influenced by NaCl concentration, but the length of stipes and individual weight were much influenced. In plastic box cultivation filled with cotton waste, watering treatment with the different concentrations of sodium chloride solution, the second experiment, did not show any difference according to the concentration until 1.0% solution but there was a little difference according to the strains. The productivity of fruitbody started to decrease at 2.0% of the solution and the yield and quality of mushroom in 3.0% solution treatment were generally low. After the second flush, days for mushroom sprouting were generally prolonged in proportion to the solution concentration. Taken altogether, the second experiment did not show a clear effect as the case of the first experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.708-718
• /
• 2002

In this paper, the problems in identifying the noise sources by using the sound intensity technique are dealt with for the general radiated near-field from vibro-acoustic sources. For this purpose, a three-dimensional model structure resembling the engine room of a car or heavy equipment is considered. Similar to the practical situations, the model contains many mutually coherent and incoherent noise sources distributed on the complicated surfaces. The sources are located on the narrow, connected, reflecting planes constructed with rigid boxes, of which a small clearance exists between the whole box structure and the reflecting bottom. The acoustic boundary element method is employed to calculate the acoustic intensity at the near-field surfaces and interior spaces. The effects of relative source phases, frequencies, and locations are investigated, from which the results are illustrated by the contour map, vector plot, and energy streamlines. It is clearly observed that the application of sound intensity technique to the reactive or reverberant field, e.g., scanning over the upper engine room as is usually practiced, can yield the detection of fake sources. For the precise result for such a field, the field reactivity should be checked a priori and the proper effort should be directed to reduce or improve the reactivity of sound field.