• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.216-222
• /
• 2003

In order to develop effective control methods for Bakanae disease caused by Gibberella fujikuroi (Saito) Ito during rearing of rice seedlings, we investigated the disease resistance of 15 rice varieties to G. fujikuroi and control effect of six seed disinfectants, and tried to improve the using methods of the seed disinfectants. Disease resistance was tested by investigating the disease incidence on each rice cultivar grown in rice seedling box infested with or not infested with G. fujikuroi at 30 days after sowing seeds and 20 days after heading date. The results showed that Hwayongbyeo, Dongjinbyeo, Hwoanbyeo, Nonghobyeo, Nampyeongbyeo, and Hwojinbyeo were resistant G. fujikuroi, meanwhile Keulubyeo, Sobibyeo, Odaebyeo, Junambyeo, Samchonebyeo, Sangjubyeo, and Hwabongbyeo were susceptible. Three seed disinfectants, prochloraz, fludioxonil, and carproamid + thiram + fludioxonil controlled Bakanae disease of rice very well, while bonomyl + thiram, thiophanate-methyl + thiram and thiophanate-methyl + triflumizole did not suppress the disease enough. Water temperature was turned to be an important factor for controlling the disease by treating seed disinfectants. Prochloraz showed 61% control value on the disease at $10^{\circ}C$, but it showed above 95% control value at the range of $30-35^{\circ}C$. It was confirmed that the control effect of seed disinfectants increased with increasing water temperature. Meanwhile soaking period of rice seeds in the suspension of seed disinfectants and chemical dosage had no high relation to control the disease. This results suggest that rice varieties, water temperature, and optimal selection of suitable seed disinfectants are very important to control Bakanae disease effectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.2
• /
• pp.109-114
• /
• 2009

Absorption spectra for a quantitative analysis of actinide elements such as U(VI) and Pu(V) were measured by using a liquid waveguide capillary cell (LWCC) which has an optical path length of 1.0 meter. In order to investigate radioactive elements, a LWCC is installed in a glove box and is coupled to a spectrophotometer with optical fibers. Limits of detection (LOD) for the system were determined as 0.74 and 0.35 M with molar absorption coefficients of 8.14${\pm}$0.07 (414 nm) and 17.00${\pm}$0.16 (569 nm) $M^{-1}cm^{-1}$ for U(VI) and Pu(V) ions, respectively. The measured LOD values are about 30 times more sensitive when compared to those achievable by using a conventional quartz cell with an optical path length of 1.0 cm. As an application with an enhanced sensitivity, a quantitative analysis for micromolar concentrations of Pu(V) has been performed to decrease the uncertainty in the formation constant of the Pu(VI)-OH complex.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.261-270
• /
• 2018

In this study, to replace the 'J-slot joint', a joint device between a disposal canister and an emplacement jig in Deep Borehole Disposal process, a novel joint device was designed and tested. The novel joint device was composed of a wedge on top of a disposal canister and a hook box at the end of a winch system. The designed joint device had merits in that it can recombine an emplaced canister freely without the replacement of the joint component. Moreover, it can be applied to various emplacement jigs such as drill pipes, wire-lines, and coiled tubing. To demonstrate the designed joint device, the joint device (${\Phi}110mm$, H 148 mm), a twin canister string (${\Phi}140mm$, H 1,105 mm), and a water tube (${\Phi}150mm$, H 1,500 mm) as a borehole model were manufactured at 1/3 scale. As deployment muds, Na-type bentonite (MX-80) and Ca-type (GJ II) bentonite muds were prepared at solid contents of 7wt% and 28wt%, respectively. The manufactured joint device showed good performance in pure water and viscous muds, with an operation speed of $10m{\cdot}min^{-1}$. It was concluded that the newly developed joint device can be used for the emplacement and retrieval of a deep disposal canister, below 3~5 km, in the future.

• Cartoon and Animation Studies
• /
• s.25
• /
• pp.1-39
• /
• 2011

It is important to create animation storytelling because it is the most critical factor to make animation successful at the box-office. As such, lots of researchers have paid attention to Disney's animations because the Walt Disney company has produced the largest number of interesting animations. One of Disney's strategies to make story interesting is the application of original works that were already open to public. On this point, this article explores how Disney deals with characters in its animation that is based on an original work. Drawing a comparison between characters of and those of "Hua Mulan", which is its original work, this article focuses on how characters are created and used for the purpose of managing animation storytelling. Significant differences between two works exist. That is to say, actively makes the use of characters. First, it creates several new characters that are not seen in "Hua Mulan." Those characters can be divided into three groups by their roles; realistic characters, unrealistic characters, and realistic characters of unrealistic personalities. Second, Mulan in has both masculine initiative and feminine adaptability, and each one is used as necessary through the whole narrative. Last, it sets up a relationship between characters either in a blood-based family category or in a social category. Through these results, it is possible to confirm that this modification of characters is solely to manage the narrative with more flexibility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.471-479
• /
• 2018

Recently, the spread of smart TV based Android iOS Set Top box has become common. This paper propose a new approach to control the TV using gestures away from the era of controlling the TV using remote control. In this paper, the AdaBoost algorithm is applied to gesture recognition by using a mono camera. First, we use Camshift-based Body tracking and estimation algorithm based on Gaussian background removal for body coordinate extraction. Using global and local feature vectors, we recognized gestures with speed change. By tracking the time interval trajectories of hand and wrist, the AdaBoost algorithm with CART algorithm is used to train and classify gestures. The principal component feature vector with high classification success rate is searched using CART algorithm. As a result, 24 optimal feature vectors were found, which showed lower error rate (3.73%) and higher accuracy rate (95.17%) than the existing algorithm.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.144-152
• /
• 2010

In this study, cement-based filler is used as an adhesive instead of organic adhesive, epoxy because there were problems under wet condition. First, the bond strength of cement-based filler was measured and the result was satisfied with KS F 4716. However, in case of wet condition, bond strength of epoxy adhesive decreased $0.73N/mm^2$ in 7 days and $0.84N/mm^2$ in 14 days from pilot test. This implies that there would be a problem on reinforced concrete structure in wet condition, such as tunnel and sewage box. In the second experiment, the flexural strength of RC beams with GFRP using different thickness of cement-based filler was investigated, and the result was indicated 113%, 66%, 75% increase in 10mm, 20mm, 30mm thickness, respectively. From the result, it was known that 10mm filler thickness produces stable bond performance.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.428-434
• /
• 2008

The purpose of this study was to compare the microtensile bond strength in Class I cavities associated with different light curing modes of same light energy density. Occlusal enamel was removed to expose a flat dentin surface and twenty box-shaped Class I cavities were prepared in dentin. Single Bond (3M Dental product) was applied and Z 250 was inserted using bulk technique. The composite was light-cured using one of four techniques, pulse delay (PD group), soft-start (SS group), pulse cure (PC group) and standard continuous cure (CC group). The light-curing unit capable of adjusting time and intensity (VIP, Bisco Dental product) was selected and the light energy density for all curing modes was fixed at $16J/cm^2$. After storage for 24 hours, specimens were sectioned into beams with a rectangular cross-sectional area of approximately $1mm^2$ Microtensile bond strength $({\mu}TBS)$ test was per- formed using a univel·sal testing machine (EZ Test, Shimadzu Co.). The results were analyzed using oneway ANOVA and Tukey's test at significance level 0.05. The ${\mu}TBS$ of PD group and SS group was higher than that of PC group and CC group. Within the limitations of this in vitro study, modification of curing modes such as pulse delay and soft start polymerization can improve resin/dentin bond strength in Class I cavities by controlling polymerization velocity of composite resin.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.30-41
• /
• 2002

We focus on the mobile agents which are considered as new paradigm to solve information retrieval of large volumes of data in the distributed and heterogeneous environment. The mobile agent moves the computation to data instead of large volumes of data to computations. In this paper, we propose an information retrieval model, which can effectively search data in the distributed and heterogeneous environment, using mobile agents. Our model is applied to the design and implementation of an Q&A(Question and Answer) retrieval system. Our Q&A retrieval system, called QASSMA(Q&A Search System using Mobile Agents), uses mobile agents to retrieve articles from Q&A boards and newsgroups that exist in the heterogeneous and distributed environment. QASSMA has the following features and advantages. First, the mobile retrieval agent moves to the destination server to retrieve articles to reduce the retrieval time by eliminating data traffics from the server to the client host. Also it can reduce the traffic that was occurred in the centralized network system, and reduce the usage of resources by sending its agent and running in the destination host. Finally, the mobile retrieval agent of QASSMA can add and update dynamically the class file according to its retrieval environment, and support other retrieval manner. In this paper, we have shown that our Q&A retrieval system using mobile agents is more efficient than the retrieval system using static agents by our experiments.

• The KIPS Transactions:PartB
• /
• v.15B no.1
• /
• pp.25-36
• /
• 2008

In this paper, we present a robust hand recognition approach to sudden illumination changes. The proposed approach constructs a background model with respect to hue and hue gradient in HSI color space and extracts a foreground hand region from an input image using the background subtraction method. Eighteen features are defined for a hand pose and multi-class SVM(Support Vector Machine) approach is applied to learn and classify hand poses based on eighteen features. The proposed approach robustly extracts the contour of a hand with variations in illumination by applying the hue gradient into the background subtraction. A hand pose is defined by two Eigen values which are normalized by the size of OBB(Object-Oriented Bounding Box), and sixteen feature values which represent the number of hand contour points included in each subrange of OBB. We compared the RGB-based background subtraction, hue-based background subtraction and the proposed approach with sudden illumination changes and proved the robustness of the proposed approach. In the experiment, we built a hand pose training model from 2,700 sample hand images of six subjects which represent nine numerical numbers from one to nine. Our implementation result shows 92.6% of successful recognition rate for 1,620 hand images with various lighting condition using the training model.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.105-115
• /
• 2009

According to the accident statistics published by the National Police Agency in 2007, the number of commercial vehicle(city, suburb and other buses) accidents consumes 3.5 percent of the total number of traffic accidents in this year. Since the commercial vehicles are responsible for not only the drivers but also the passengers, it leads more serious social and economic problems. There have been various forms of systems such as a digital speedometer or a black box to meet the social requirement for reducing traffic accidents and safe driving. however the system based on the data after accident control the driver by analyze dangerous drive behaviors, so there is a limit to control driver in real-time. Also speedometer currently managed provide the driver warning information in real-time, but using only the speed of vehicle and RPM information regardless of actual dangerous drive behaviors, disappear the effectiveness. In this study performed a simulation for drivers in general using a simulator programed with dangerous driving types we had developed in the previous study and judging the types. It'd be more effective system to provide the drivers warning information using weight valued in this study. However in this study is limited to apply weight as a result of simulation of drivers in general in actual situation should be made up the deficit based on information of driving type of actual commercial vehicles.