• Title/Summary/Keyword: box

Search Result 6,627, Processing Time 0.034 seconds

The Survey of Anthropometric Data and Dietary Behavior of Chinese Middle and High School Students Living in Incheon, Korea (한국 인천에 거주하고 있는 화교 중.고등학생의 체위와 식생활 행동에 관한 연구)

  • Jung, Mee-Lee;Rho, Sook-Nyung;Kim, Chun-Soo
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.17 no.3
    • /
    • pp.289-303
    • /
    • 2007
  • This report includes basic data on nutrition education for Chinese adolescents living in Korea. A total of 183 Chinese adolescents living in Incheon participated in the survey. Body composition was analyzed by the Inbody 4.0., and questionnaires on personal dietary behavior were administrated. When compared with the body measure indices of Korean adolescents, we found that height was similar, but weight greater ($5{\sim}12 kg$) among the participants. Regarding obesity, 30.0% of all students were obese (BMI>25), especially the high school boys (42.0%). But in the case of middle school boys, the rates of obesity and under weight (BMI<18.5) were the same (both of them at 22.9%). The average WHR (Waist Hip Ratio) of the female high school group (0.9) was over the normal range. The average percent body fat for each group was also over the normal range. The percentage of students having breakfast everyday was 52.2%, and the rate of skipping breakfast was 25.0%. In the obesity group, the rate of skipping breakfast was remarkably high (P<0.05). Because lunch service was not available at the schools, a lunch box from home was the most popular pattern (43.1 %), but eating out was also popular at 36.6%. For the male high school students, the eating out rate was 62.8%. Since many have-lived in Korea for a few generations, the students' eating practices were much closer to the Korean pattern. For their ordinary meal pattern, 96.0% of the students included Korean foods. however, for New Years Day, the rate of having Gyo-Ja was 75.2%, and having Wol-Byung at Choo-seok was 78.6%, showing that the Chinese tradition still remains. In the case of food preferences, the percentage having Kimchi everyday was 62.1 %, but those drinking green tea was 13.1 %. For cold drinks, the rate for drinking them more than twice per week was 71.6%. The most preferred cooking method was frying with oil (50.6%). Among the students who had visited China (or Taiwan), the rate for 'bad food familiarity' was 37.0%, and the rate for 'did not know Chinese traditional course menus' was 71.3%. As a result of combining eating practices from both China and Korea, and the absence of lunch service in Chinese schools, students are showing bad dietary behaviors. therefore, it is necessary to provide proper nutrition education and a system for lunch service in Chinese schools.

  • PDF

A Design of AES-based WiBro Security Processor (AES 기반 와이브로 보안 프로세서 설계)

  • Kim, Jong-Hwan;Shin, Kyung-Wook
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.7 s.361
    • /
    • pp.71-80
    • /
    • 2007
  • This paper describes an efficient hardware design of WiBro security processor (WBSec) supporting for the security sub-layer of WiBro wireless internet system. The WBSec processor, which is based on AES (Advanced Encryption Standard) block cipher algorithm, performs data oncryption/decryption, authentication/integrity, and key encryption/decryption for packet data protection of wireless network. It carries out the modes of ECB, CTR, CBC, CCM and key wrap/unwrap with two AES cores working in parallel. In order to achieve an area-efficient implementation, two design techniques are considered; First, round transformation block within AES core is designed using a shared structure for encryption/decryption. Secondly, SubByte/InvSubByte blocks that require the largest hardware in AES core are implemented using field transformation technique. It results that the gate count of WBSec is reduced by about 25% compared with conventional LUT (Look-Up Table)-based design. The WBSec processor designed in Verilog-HDL has about 22,350 gates, and the estimated throughput is about 16-Mbps at key wrap mode and maximum 213-Mbps at CCM mode, thus it can be used for hardware design of WiBro security system.

Efficient Floor Vibration Analysis in A Shear Wall Building Structure (벽식구조물의 효율적인 연직진동해석)

  • Kim, Hyun-Su;Lee, Dong-Guen
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.8 no.6 s.40
    • /
    • pp.55-66
    • /
    • 2004
  • Recently, many high-rise apartment buildings using the box system, composed of only reinforced concrete walls and slabs, have been constructed. In residential buildings such as apartments, vibrations occur from various sources and these vibrations transfer to neighboring residential units through walls and slabs. It is necessary to use a refined finite element model for an accurate vibration analysis of shear wall building structures. But it would take significant amount of computational time and memory if the entire building structure were subdivided into a finer mesh. Therefore, an efficient analytical method, which has only translational DOFs perpendicular to walls or slabs by the matrix condensation technique, is proposed in this study to obtain accurate results in significantly reduced computational time. If all of the DOFs except those perpendicular to walls or slabs in the shear wall structure eliminated using the matrix condensation technique at a time, the computational time for the matrix condensation would be significant. Thus, the modeling technique using super elements and substructuring technique is proposed to reduce the computational time for the matrix condensation. Dynamic analysis of 3-story and 5-story shear wall example structures were performed to verify the efficiency and accuracy of the proposed method. It was confirmed that the proposed method can provide the results with outstanding accuracy requiring significantly reduced computational time and memory.

Wavelet Image Coding according to the Activity Regions (활성 영역에 따른 웨이브렛 영상 부호화)

  • Park, Jeong-Ho;Kim, Dae-Jung;Gwak, Hun-Seong
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.39 no.2
    • /
    • pp.30-38
    • /
    • 2002
  • In this paper, we propose a new method for image coding which efficiently use the relationship between the properties of spatial image and its wavelet transform. Firstly, an original image is decomposed into several layers by the wavelet transform, and simultaneously decomposed into 2$^n$$\times$2$^n$blocks. Each block is classified into two regions according to their standard deviation, i.e., low activity region(LAR) and high activity region(HAR). The region with low frequency in spatial domain does not only appears as zero regions in wavelet frequency domain like HL, LH, and HH but also gives little influence to the quality of reconstructed image. The other side, the high frequency regions are related to significant coefficients which gives much influence to image reconstruction. In this paper, we propose a image coding method to obtain high compression rate at low bit rate by these properties. The LAR region is encoded by LAR coding method which is proposed in this paper, the HAR by a technique similar to bitplane coding in hierarchical tree. Simulation results show that th,$\boxUl$ proposed coding method has better performance than EZW and SPIHT schemes in terms of image quality and transmitted bit rates, can be successfully applied to the application areas that require of progressive transmission.

TFWT and OBT Concentrations in Rice Plants Exposed to HTO Vapor during Daytime and Nighttime at Different Seed-Developing Stages (벼의 종실 발육단계에 따른 주간 및 야간 HTO 증기 피폭시 TFWT 및 OBT 농도)

  • Choi, Yong-Ho;Lim, Kwang-Muk;Lee, Won-Yun;Kang, Hee-Suk;Choi, Heui-Joo;Lee, Han-Soo;Diabate, Silvia;Strack, Siegfried
    • Journal of Radiation Protection and Research
    • /
    • v.28 no.1
    • /
    • pp.9-18
    • /
    • 2003
  • Rice plants at different seed-developing stages were exposed to HTO vapor in an exposure box for 1 h during daytime and nighttime to investigate the levels of tissue free water $^3H$ (TFWT) and organically bound $^3H$ (OBT) in different plant parts. In the daytime experiment, TFWT concentrations in leaves at the end of exposure $(h_0)$ were around 100% of the 1 hour mean HTO concentrations in air moisture whereas in the nighttime experiment, they were as low as $30{\sim}40%$ of the air concentration. TFWT concentrations in both experiments decreased very rapidly in the beginning but much mote slowly later and those at harvest were hundreds to hundred thousands times lower than those at $h_0$. OBT concentrations varied with time in different manners depending on plant parts and exposure times and differed between at $h_0$ and at harvest by factors of less than 10 on the whole. Even during nighttime exposures, OBT was produced at about a third the rate for daytime exposures. The degree of the conversion of airborne HTO into OBT in mature rice seeds, being several times higher in the daytime experiment than in the nighttime experiment, was highest after the exposure peformed at the most actively seed-developing stage for both experiments. It is estimated that OBT would contribute much more to the ingestion radiation dose than TFWT if rice plants are exposed to HTO vapor for the seed-developing period.

An Experimental Study on the Direct Contamination Pathway of Elemental iodine Vapor $(I_2)$ for Rice Plants (벼에 대한 원소상 요오드 증기$(I_2)$의 직접오염경로 해석 실험)

  • Choi, Y.H.;Lim, K.M.;Lee, C.M.;Park, H.G.;Park, D.W.;Choi, G.S.;Choi, H.J.;Lee, H.S.;Lee, C.W.
    • Journal of Radiation Protection and Research
    • /
    • v.29 no.3
    • /
    • pp.165-172
    • /
    • 2004
  • Rice plants were exposed to $I_2$ vapor for 80 min at different growth stages in an exposure box to investigate the parameters concerning direct plant contamination. Deposition velocity $(m\;s^{-1})$ of the $I_2$ vapor for the straws was in the range of $1.4{\times}10^{-5}-1.3{\times}10^{-4}$ depending on the exposure time, being comparatively low during the earlier part of the plant growth. Ear deposition velocity was in the range of $2.5{\times}10^{-5}-6.7{\times}10^{-5}$. Whole-plant deposition velocity was in the range of $1.4{\times}10^{-5}-1.8{\times}10^{-4}$ with the highest from the exposure performed on Aug. 18 (7 d after the start of heading). The time-dependent variation generally decreased when the deposition velocity was normalized to the biomass density No noteworthy tendency in the deposition velocity was observed with regard to the temperature, sunlight and humidity. Translocation factor for the hulled seeds was $3.3{\times}10^{-5}-4.7{\times}10^{-4}$ with the highest from the Aug. 23 exposure. It was found that a leaf deposition even before the ear emergence resulted in a considerable seed translocation.

Induction of Muscle Atrophy by Dexamethasone and Hydrogen Peroxide in Differentiated C2C12 Myotubes (C2C12 근관세포에서 dexamethasone 및 hydrogen peroxide에 의한 근위축 유도)

  • Park, Cheol;Jeong, Jin-Woo;Choi, Yung Hyun
    • Journal of Life Science
    • /
    • v.27 no.12
    • /
    • pp.1479-1485
    • /
    • 2017
  • Muscle atrophy due to aging, starvation, and various chronic diseases leads to a decrease in muscle fiber area and density due to reduced muscle protein synthesis and increased protein breakdown. This study investigated the effect of dexamethasone and hydrogen peroxide on the induction of muscle atrophy and expression of atrophy-related genes in differentiated C2C12 myotubes. C2C12 myoblasts were differentiated into myotubes in differentiation medium. During myoblast differentiation, muscle-specific transcription factors, such as myogenin, and MyoD expression increased. Differentiated C2C12 myotubes exposed to noncytotoxic levels of dexamethasone and hydrogen peroxide showed a decrease in myotube diameter, which was associated with up-regulation of muscle-specific ubiquitin ligases, such as muscle atrophy F-box (MAFbx)/atrogin-1 and muscle RING finger-1 (MuRF1), and down-regulation of myogenin and MyoD. These results demonstrated that dexamethasone and hydrogen peroxide induced atrophy through regulation of muscle-specific ubiquitin ligases and muscle-specific transcription factors in C2C12 myotubes. In this study, we confirmed the process of differentiation of C2C12 myoblasts into myotubes in in vitro experiments in the presence of atrophy. This muscle atrophy model of C2C12 cells induced by dexamethasone or hydrogen peroxide seems suited to studies of the mechanism of muscle atrophy suppression and to exploit the experiment for excavating new muscle atrophy.

Analysis of Volatile Organic Compounds Produced from Incineration of Papers at 600°C (600°C에서 제지류 소각시 발생하는 휘발성 유기화합물 농도분석 연구)

  • 이병규;조정범
    • Journal of Environmental Science International
    • /
    • v.11 no.10
    • /
    • pp.1109-1116
    • /
    • 2002
  • This study analyzed concentrations of volatile organic compounds (VOCs) produced from incineration of papers at $600^{\circ}C$. The papers used in this study included A4 papers (new, printed with ink-jet, printed with carbon), newspapers (printed with bean oil, printed with a general newspaper ink), packaging box, document envelope, single-use paper cup, and cosmetic tissue. Papers were heated from room temperature upto $600^{\circ}C$ providing air inside of the electric furnace and then they were oxidized for 80 minutes at $600^{\circ}C$ maintaining the same air supply. VOCs emitted from the incineration process were sampled using an air sampling pump and bags for 160 minutes and then the components and concentrations of the VOCs were analyzed by a CC-MS. The most prominent chemical structure of the Vous identified from incineration of the papers was furans and then furans were followed by aromatics and aliphatic alkenes. About 40% of the identified VOCs contained double bonds, which have relatively a high ozone (ground level) formation potential, within their molecular structure. Also, some cancer suspecting compounds like benzene, dichlorormethane and chloroform were identified.

BIM Based Time-series Cost Model for Building Projects: Focusing on Construction Material Prices (BIM 기반의 설계단계 원가예측 시계열모델 -자재가격을 중심으로-)

  • Hwang, Sung-Joo;Park, Moon-Seo;Lee, Hyun-Soo;Kim, Hyun-Soo
    • Korean Journal of Construction Engineering and Management
    • /
    • v.12 no.2
    • /
    • pp.111-120
    • /
    • 2011
  • High-rise buildings have recently increased over the residential, commercial and office facilities, thus an understanding of construction cost for high-rise building projects has been a fundamental issue due to enormous construction cost as well as unpredictable market conditions and fluctuations in the rate of inflation by long-term construction periods of high-rise projects. Especially, recent violent fluctuations of construction material prices add to problems in construction cost forecasting. This research, therefore, develops a time-series model with the Box-Jenkins methodologies and material prices time-series data in Korea in order to forecast future trends of unit prices of required materials. BIM (Building Information Modeling) approaches are also used to analyze injection time of construction resources and to conduct quantity takeoff so that total material price can be forecasted. Comparative analysis of Predictability of tentative ARIMA (Autoregressive Integrated Moving Average) models was conducted to determine optimal time-series model for forecasting future price trends. Proposed BIM based time series forecasting model can help to deal with sudden changes in economic conditions by estimating future material prices.

An Experimental Study for the Design of Household-Storage Facilities (부엌 수납장 설계 기준 설정을 위한 기초적 연구)

  • 최재순
    • Journal of the Korean Home Economics Association
    • /
    • v.20 no.4
    • /
    • pp.155-168
    • /
    • 1982
  • What is attempted here is to find out an optimum method for the design of physical environments that could save human energy expenditures and safely perform household duties. There are, if any, very little amount of research done in this area. This is particulary so when the work relates to the designing of household storage facilities in the light of the energy metabolism of human body. The first step to this study, therefore, is to find out the ways by which we can determine the energy metabolism of human body accurately. To measure the volume and the concentration of human respiration continuously and automatically, a new apparatus is selected here. This includes the recording system with the Wright Respirometer and the Expired Gas Analyzer as well as the computer system to multiply volume by concentration of human respiration and to integrate them for a given time. Then, the author experimented on the reliability of this apparatus and came to the conclusion that this apparatus satisfied our need to research the energy metabolism of human body. Next, the general plan and procedures to experiment with this apparatus have been determined as follows: 1) subjects are three young and sound females. Their physical characteristics are shown in Table 1 and most approximates the standard characteristics of Japanese females, 2) height of open shelves is selected in such away as to correspond to the respective height of each subject(see Table 2), 3) utensils to be stored are box shaped object, which weight is 0.5kg, 1.0kg, 2.0kg or 3.0kg, 4) working motions are given while one or two hands as to place utensil on each shelf from the standard working board, 85 cm in height and then to place back it on the board from the shelf and repeated in constant velocity as 10 times per a minute, 5) each posture of motion is chosen by each subject in free, 6) procedures of measurement of human energy metabolism ard shown at(6), 1, Section 3 as specific methods for using this apparatus. Findings of this study are as follows: 1. Human energy expenditures for storing utensils on shelves by each subject are shown in quantity more accurately than in any other studies, under varying conditions about height of shelves, load of utensils and working motion with one hand and two hands (see Fig. 8~13 and Table 3). 2. Experimental formulae of human energy expenditure for that work are shown as formula (8), (9) and (10), to generalize results of 1. and to apply those for working motion under given conditions. 3. As results of analysis on gained data, we are able to show the standard model of human energy expenditures for storing untensils on shelves by the standard Japanese female (see Table 7 and Fig. 14).

  • PDF