• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.708-718
• /
• 2002

In this paper, the problems in identifying the noise sources by using the sound intensity technique are dealt with for the general radiated near-field from vibro-acoustic sources. For this purpose, a three-dimensional model structure resembling the engine room of a car or heavy equipment is considered. Similar to the practical situations, the model contains many mutually coherent and incoherent noise sources distributed on the complicated surfaces. The sources are located on the narrow, connected, reflecting planes constructed with rigid boxes, of which a small clearance exists between the whole box structure and the reflecting bottom. The acoustic boundary element method is employed to calculate the acoustic intensity at the near-field surfaces and interior spaces. The effects of relative source phases, frequencies, and locations are investigated, from which the results are illustrated by the contour map, vector plot, and energy streamlines. It is clearly observed that the application of sound intensity technique to the reactive or reverberant field, e.g., scanning over the upper engine room as is usually practiced, can yield the detection of fake sources. For the precise result for such a field, the field reactivity should be checked a priori and the proper effort should be directed to reduce or improve the reactivity of sound field.

• The Journal of Society for e-Business Studies
• /
• v.19 no.3
• /
• pp.125-141
• /
• 2014

Nowadays, overflowing data produced every second from the internet make people to be difficult to search for the useful information. That's why people have invented and developed unique tools that they get some relevant information. In this paper, the recommender system, one of the effective tools, is used and it helps us to get the useful information that we want by using demographic information to predict new items of interest. The demographic recommender system in this paper computes users' similarity using demographic information, age and gender. So we performed demographic analysis on movie ratings on Internet Movie Database (IMDB) web site that movies are rated by thousands of people, where users submitted a movie rating after they watched a recent popular film. Meanwhile, we can understand that user's ratings, among various determinants of box office, is very essential factor in the study on recommendation of movie. This paper is aimed at analyzing movie average ratings directly given by film viewers, categorizing them into groups by sex and age, investigating the entire group and finding the representative group by examining it with F-test and T-test. This result is used to promote and recommend for the target group only. Therefore, this study is considerably significant as presenting utilization for movie business as well as showing how to analyze demographic information on movie ratings on the web.

• Journal of agricultural medicine and community health
• /
• v.45 no.2
• /
• pp.69-78
• /
• 2020

Purpose: This study was conducted to provide the results of the epidemiological investigation for outbreak of Clostridium perfringens enteritis among students at a college in Sejong City. Methods: This investigation was performed between May 25 and May 28, 2018. The Sejong City public health authority received a complaint which was about 40 university students experienced vomiting or diarrhea. We immediately set up an epidemiological investigation team and conducted a field epidemiological investigation. Results: The overall incidence was 86 out of 153 (56.2%). The estimated risk exposure time was 12 o'clock on the previous day, and the cause was contaminated during distribution and storage of the lunch box provided for lunch on the day of the athletic competition, with 13 hours of average incubation period. The outbreak was closed on May 28, and the identified pathogen was Clostridium perfringens. Conclusions: It was proposed that food poisoning by Clostridium perfringens was likely and contaminated during group meal.

• The Journal of Korean Association of Computer Education
• /
• v.11 no.1
• /
• pp.57-64
• /
• 2008

This paper presents a web-based virtual educational system for Java language, which consists of a management system named Java Web Player (JWP) and creative multimedia contents for the lectures of Java language. The JWP is a Java application program free from security problems by the Java Web Start technologies that supports an integrated learning environment including three important learning procedures: Java concept learning process, programming practice process and assessment process. On-line voice presentation and its related texts together with moving images are synchronized for efficiently conveying creative contents to learners. Furthermore, a simple and useful compiler is included in the JWP for providing user-friendly language practice environment enabling such as coding, editing, executing, and debugging Java source files on the Web. Finally, simple multiple choices are given suddenly to the learners while they are studying through the JWP and the test results are displayed on the message box. In order to show the validity of the proposed virtual educational system we analysed and assessed the learners' academic performance on the five quizzes for one semester.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.39-44
• /
• 2005

A sheet type of green body was made with the mixture of 60 wt% red clay, 20 wt% fly ash, and 20 wt% stone sludge. Indentations were made on the surfaces of sheets to investigate fracture rate of 1 to 5 mm artificial light-weight aggregates by various drying, breaking, and forming methods. Drying methods of green bodies were natural, electric oven, microwave, and fast drying by torch. Breaking methods of green bodies were ballmill Ⅰ, ballmill Ⅱ, free dropping in the box, and mechanical breaking with roller mill. The depth and width of indent on the surface of the sheet were varied and the thickness of green bodies was also changed to investigate effects of indentation on fracture rates. The highest fracture rate of 42 % among the various drying methods was obtained by microwave drying for 210 sec and the highest fracture rate of 65 % among the various breaking method was obtained by ballmill Ⅱ method. In forming method, an yield of larger aggregates than Ф = 5 mm decreased and that of smaller aggregates than Ф = 5 mm in creased with increasing depth of indentation (only in 3 mm thick green body)and with increasing thickness of green body. The size of aggregates was most homogeneous (by judging from the measurement of aspect ratio of 1 to 5 mm aggregates.) when 3 mm thick green body was rapidly dried by torch and was broken by ballmill Ⅱ method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.789-799
• /
• 2019

The settlement hardly occurs in structures supported by pile foundation such as abutment, culvert but a cavity is formed in the lower part of a structure. As a result, soil discharged from the lateral ground to the cavity accelerates the settlement of the lateral ground of the structure, resulting in a larger settlement. Therefore, in order to prevent problems caused by cavity under the structure supported by pile foundation, soil Flow Protector (briefly called 'FLP'), which can be easily installed on the side of structure, was developed. In this study, an laboratory model test was carried out to prove the reduction effect of settlement and to estimate the optimal installation length of the FLP. As a result, the installation of the FLP reduced the settlement of the lateral ground and prevented the leakage of lateral ground soil into the cavity. If the stiffness of the FLP is small, the state or active earth pressure is generated in the upper part, which is not favorable for stability. But if the stiffness of the FLP is high enough, the passive earth pressure area is generated in the upper part, which will be advantageous for the stability. Also, the increased installation length of FLP is effective to reduce the settlement. And the ratio of the optimal length of the FLP to the box structure height (H = 250 mm) are flexible FLP 1.38, stiff FLP 0.73.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.374-380
• /
• 2017

Image analysis and k-mean clustering were conducted to develop a grading system of dried sea cucumber (SC) based on rehydration rate. The SC images were obtained by taking pictures in a box under controlled light conditions. The region of interest was extracted to depict the shape of the SC in a 2D graph, and those 2D shapes were rendered to build a 3D model. The results from the image analysis provided the morphological features of the SC, including length, width, surface area, and volume, to obtain the parameters of the k-mean clustering weight. The k-mean clustering classified the SC samples into three different grades. Each SC sample was rehydrated at $30^{\circ}C$ for 40 h. During rehydration, the flux of each grade was analyzed. Our study demonstrates that the mass transfer rate of SC increased as the surface area increased, and the grade of SC was classified based on rehydration rate. This study suggests that the optimal rehydration process for SC can be achieved by applying a suitable grading system.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.2
• /
• pp.150-160
• /
• 2017

Atopic dermatitis (AD) is a chronic inflammatory skin disease. It is characterized by eczematous lesions, skin dryness, and pruritus. The existing treatment drugs for AD have side effects, especially if the drugs are taken for extended periods. Therefore, new alternative therapies are necessary. The aim of this study was to investigate the combined effects of curcumin administration and LED irradiation on AD. AD-like lesions were induced in BALB/c mice by repeated application of 1-chloro-2,4-dinitrobenzene (DNCB) to the shaved skin of the ear and neck. Thirty male BALB/c mice were divided into five groups: vehicle, DNCB, curcumin, LED, and curcumin+LED groups. Curcumin (0.1 g/kg/day) was administrated repeatedly during a period of 14 days (experimental period) and 630 nm LED irradiation ($5J/cm^2/day$) was performed in the acryl box once a day for 10 days, after inducing AD-like lesions via DNCB application. The severity of AD-like lesions was evaluated during the experimental period, using a modified SCORAD index. Both ear and neck skin tissues were examined histologically for epidermal thickness, mast cell, eosinophil counting, and dermal collagen density. Epidermal cell proliferation and apoptosis were detected using immunohistochemistry and TUNEL, respectively. These were all reduced in SCORAD index, epidermal thickness, collagen density, number of mast cell and eosinophil in dermis, and number of proliferating cell and apoptotic cell in epidermis by curcumin administration and 630 nm LED irradiation. Moreover, all parameters were significantly lower in the curcumin+LED group compared with the curcumin group and LED group. These results suggest that the combined therapy of curcumin and LED is more effective than a single treatment. We recommend that this can be a feasible alternative therapy to manage AD.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.64-71
• /
• 2016

According to the urban gas business law, electrical corrosion prevention measures shall be installed to the buried gas pipelines and the pipe-to-soil potentials should be measured at the test box at least once a year. Most of the test boxes installed in urban area are usually located on the road where the vehicle travels, therefore, it is difficult to measure the CP potentials at the test boxes. That is, we need traffic control when carrying out the measurement of the CP potentials on daytime when the traffic is heavy, or we have to measure the potentials in the late night when the traffic is light. To solve these difficulties, we have studied remotely CP potential measuring method by using the patrol car. We have installed solid reference electrodes and data loggers under the test boxes on the site and received the CP potentials from the data loggers when the vehicle moves. It was difficult to send and receive the data because the data logger was located under the ground. We have applied 3 different method including 2 antenna systems to achieve best effective way in receiving the data. We have found the remote CP measuring method by using a car can save more 20 times of measuring time than conventional measuring methods.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.363-368
• /
• 2017

The tsunami flood the coastal cities and damage the land structures. The study on wave pressure and force on land structures is one of the important factors in designing the stability of inland structures. In this study, two - dimensional wave flume tests on the horizontal wave force and pressure of tsunamis on a simplified box-type structure was conducted. Vertical distribution and wave power of horizontal wave pressure over time were measured by pressure sensors and force transducer. Also, those were measured from the different wave breaking types. The vertical distribution of horizontal wave pressure was uniform at the moment when the horizontal wave force to the structure was maximum under the breaking wave condition. A surf similarity parameter was employed in order to figure out the relationship between the maximum horizontal wave force on the structure as a function of various incident wave conditions. As a result, the non - dimensionalized horizontal wave force tends to decrease exponentially as the surf similarity parameter increases.