• Journal of Chest Surgery
• /
• v.30 no.11
• /
• pp.1083-1091
• /
• 1997

This study was purposed to assess the result of coronary artery bypass graft surgery by analyzing and comparing the pre and postoperative myocardial perfusion state quantitatively by using myocardial SPECT. Twenty patients who received coronary artery bypass graft surgery since 1993 underwent both preoperative and postoperative myocardial SPECT and the result were analyzed. The mean age was 56.4$\pm$9.0 years, and the patients were composed of thirteen males and seven females. For quantitative analysis, we used polar maps of SPECT generated by Cedars-Sin i Medical Center program and we calculated perfusion scores, ischemic myocardial area ratios and reperfusion scores from polar maps. Preoperative mean stressfrest perfusion score was 7.3$\pm$ 1.117.7$\pm$ 1.0 and postoperative score was 8.1 $\pm$ 1 118.3$\pm$ 1.1. Preoperative mean stress ischemic myocardial area ratio was 0.32$\pm$0.2 and postoperative ratio was 0.15 $\pm$0.1. Postoperative mean perfusion score was significantly increased but, on the other hand, mean ischemic myocardial area ratio was significantly decreased as compared with preoperative values(p<0.01). Preoperative mean perfusion score of patients with postoperative roper(usion score more than 1.5 was significantly higher(p<0.01) than that of patients with postoperative reperfusion score less than 1.5. Preoperative perfusion scores of coronary artery territories that had fixed perfusion defect at myocardial SPECT were significantly low(4.3 $\pm$0.514.6$\pm$0.6, stresslrest), nevertheless it proved quantitatively that there was improvement in myocardial perfusion after surgery by showing improved perfusion scores postoperatively. In conclusion, myocardial SPECT is useful method for quantitative analysis of the myocardial perfusion state after coronary artery bypass grafting surgery.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.206-225
• /
• 2019

This paper examines the trade and development aspects of glass mirrors through the literature records of the Joseon Dynasty, and studies the characteristics of existing glass mirror crafts by referring to the terms and types shown in the literature. The glass mirror in the records had called western mirrors(西洋鏡, 洋鏡), glass mirrors(玻璃鏡, 玻瓈鏡), stone mirrors(石鏡), etc. Glass mirrors were imported mainly through trade with Russia and the Qing Dynasty since the 17th century and were banned from importation in the late Joseon Dynasty. These mirrors were something new that caused a great stirring in Joseon society in the 18th century, and in the 19th century, it grew larger as a commodity needed for everyday life, especially with trade with Japan. At that time, glass mirrors were used for various purposes, such as installing large glass at a store, which were not the standard mirror usage of confirming one's appearance. These mirrors surprised Koreans in Joseon who experienced them at Yanjing Liulichang(燕京 琉璃廠) in the 18th and 19th centuries. As a result, the demand for glass mirrors rapidly increased and quickly surpassed that of bronze mirrors. Consequentially, new crafts using glass mirrors instead of bronze mirrors in Joseon began to be produced and used after the 18th century. In particular, integrated flat boards of glass mirrors were developed as crafts used indoors. It was convenient to use the hair comb box, a long-time presence in Joseon society, with the bronze mirror. This kind of mirror remained apparent in various genre paintings, including the Taepyeong Seongsido(太平城市圖, 'A Thriving City in a Peaceful Era') collected the National Museum of Korea which reflect its populism of the times. Also, the Mirror Stand(鏡臺) used in the Qing Period was produced in Joseon, but there was a difference in the way of making the drawers and box shapes between two nations. On the other hand, the Face Mirror(面鏡) was made to look at the face. Various crafts made with the aesthetic sense of Joseon, such as the ox horn inlaying craft technique, were produced with auspicious designs. In the 19th century, glass mirrors were imported from European countries, such as France, Denmark, the Netherlands, and the United Kingdom, however after the end of the 19th century Japanese crafts were popular. Glass mirrors, which were popular in the Meiji and Taisho eras of Japan, were imported and also the Mirror Screen(鏡屛) using large glass mirrors were used. In particular, the mirror screen had developed wood furniture since the previous time, which were used for banquets and large spaces, such as the drawing room, and were imported from China and Japan. In addition, the western architectural effect of attaching a mirror to the wall was also attempted to adjust the brightness of the space and introduce another image and scenery in the mirror. This was done at Deoksugung Palace's Seokjojeon.

• Cartoon and Animation Studies
• /
• s.28
• /
• pp.27-53
• /
• 2012

American superhero comics are being produced in numerous different forms for multiple, and cross-platform media. In cinema, films based on superhero comics top the list of all time box office records. The same phenomenon of the 'Invasion of Superhero' is duplicated in Korean box office 2012, however, the korean fans are not familiar with the superheroes from the publication which provides the original source of characters and stories for other superhero related media products. Based on observing the multiple and vastness of world building characteristics of superhero comic, this paper attempts to associate the continuous creative nature and the infinite repetition of superheroes and comic texts with the identity of superhero on ontological level. First, chapter 2 examines how one superhero exists in multiple and different worlds individually by utilizing the concept of 'multi-universe' or 'multiverse' in comic texts. Initially, duplicating a superhero on multiple settings and series destroyed continuity and allowed contradiction and paradox confused narrative as a whole, but it also gave chances for comics to be more vibrant and experimental with their stories and characters. Chapter 3 analyzes the superhero comic texts in the light of repetition, concept developed by french philosopher Gilles Deleuze, and make the argument that the superheroes and texts are not repeated to generate surplus of source for economic utilitarian purposes, but it is, first and foremost, a repetition of creativeness and capability. Many concepts introduced by Deleuze in his early masterpiece, $\acute{e}$rence et R$\acute{e}$p$\acute{e}$tition> are taken to support this argument. Mainly, his critical views on generality of the identity and his effort to replace the Plato's system of representation with vibrant creative, and renewal energy of r$\acute{e}$p$\acute{e}$tition. According to Deleuze, repetition is similar concept, if not identical, to what Nietzsche called the 'eternal return' which allows the return of the Overhuman or the Superhuman, and he extends his idea that the returning Overhuman is the singular simulacre which opposes the generalization of identity, in the likes of Plato's Idea. Thus, the superhero's identity is ever changing, ever returning, and ever renewing Overhuman. The superhero must be repeated to fully actualize his/her existence. Also, based on Deleuze's reading of Bergson's texts on the Virtual, the superhero, for example Superman, is actualization of his/her multiplisit$\acute{e}$, the internally multiple, and differentiated variations from itself. These every Supermans' multiplisit$\acute{e}$ shares common memory, past, and duration, thus the Virtual of Superman. Superman becomes himself only by actualizing the movement and differentiation from these multiplisit$\acute{e}$ in his virtual on the surface of reality. On chapter 4, a popular Korean comic book character Oh, Hae-Sung's r$\acute{e}$p$\acute{e}$tition and multiplist$\acute{e}$ are analyzed, and makes comparison to that of Superman to distinguish the repetition from r$\acute{e}$p$\acute{e}$tition, and multiplicit$\acute{e}$ from diversity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1731-1741
• /
• 2014

Recently, many overpasses, highway, and advanced transit systems have been constructed to distribute the traffic congestion, thus small size of curved bridges with small curvature such as ramp structures have been increasing. Many of early curved bridges had been constructed by using straight beams with curved slabs, but curved steel beams have replaced them due to the cost, aesthetic and the advantage in building the section form and manipulating the curvature of beams, thereby large portion of curved bridges were applied with steel box girders. However, steel box girder bridges needs comparatively high initial costs and continuous maintenance such as repainting, which is the one of the reason for increasing the cost. Moreover, I-type steel plate girder which is being studied by many researchers recently, seem to have problems in stability due to the low torsional stiffness, resulting from the section characteristics with thin plate used for web and open section forms. Therefore, in recent studies, researchers have proposed curved precast PSC girders with low cost and could secured safety which could replace the curved steel girder type bridges. Hence, this study developed a Smart Mold system to manufacture efficient curved precast PSC girders. And by using this mold system a 40 m 2-girder bridge was constructed for a static flexural test, to evaluate the safety and performance under ultimate load. At the manufacturing stage, each single girder showed problems in the stability due to the torsional moment, but after the girders were connected by cross beams and decks, the bridge successfully distributed the stress, thereby the stability was confirmed. The static loading test results show that the initial crack was observed at 1,400 kN when the design load was 450 kN, and the load at the allowable deflection by code was 1,800 kN, which shows that the safety and usability of the curved precast PSC bridge manufactured by Smart Mold system is secured.

• The Korean Journal of Mycology
• /
• v.34 no.1
• /
• pp.39-53
• /
• 2006

This studies investigated the effect of concentrations of sodium chloride (NaCl) on occurrence and growth of fruitbody in oyster mushrooms, Pleurotus spp. Our experiments divided into two parts. When the water contents in substrate were added with sodium chloride solution in cotton waste box cultivation as a first experiment, the growth of mushroom was damaged as the concentration was increased, even though there was a little difference according to the strains. The yield in 1.0% NaCl solution was decreased to 72% compared to non-treated plot while that in 3.0% solution was only 2% of the non-treated plot. Morphological characteristics of mushrooms cultivated in substrate with the different concentration of the solution showed different results. For example, the size and thickness of pilei were not influenced by NaCl concentration, but the length of stipes and individual weight were much influenced. In plastic box cultivation filled with cotton waste, watering treatment with the different concentrations of sodium chloride solution, the second experiment, did not show any difference according to the concentration until 1.0% solution but there was a little difference according to the strains. The productivity of fruitbody started to decrease at 2.0% of the solution and the yield and quality of mushroom in 3.0% solution treatment were generally low. After the second flush, days for mushroom sprouting were generally prolonged in proportion to the solution concentration. Taken altogether, the second experiment did not show a clear effect as the case of the first experiment.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.511-520
• /
• 2006

The study analyzed the distribution of mammalia per altitude in Gamebong, the highest trail of Juwangsan National Park and confirmed the inhabitation of 22 different species inhabiting in the park. Starting from 200 m to 800 m above the sea level was segmented into 100 m unit. The result of analysis has shown that the Tamias sibiricus is the dominant specie throughout in all segments. Species confirmed to be inhabiting in all segments of research areas were Mustela sibirica, Caproelus pygargus and squirrel. By analyzing the confirmed Field Sign basing from the observation point, it has shown close relations between types of species and population following the increase in altitude (y=-0.0234 + 25.552, $R^2$=0.9296, $F_{0.05}$(1,4)=7.71, p<0.05). However, the result of analysis targeting nine species inhabiting in at least five out of six 100 m segmented units has shown that only two species, Apodemus sgrarius (y=-0.034X+25.2, $R^2$=0.905, $F_{0.05}$(1, 4)=38.169, p<.0.01) and Sciurus vulgaris (y=-0.0154X+ 12.819, $R^2$=0.781, $F_{0.05}$(1, 4)=14.270, p<0.05) were affected by the altitude. Therefore, it is judged that the distribution of species does not follow the altitude variation but follows the food conditions and the structure of habitat. The result of analysis of Box and Whisker Diagram had shown lowest quartile deviation($Q_U-Q_L$) in Nature Restoration Area that is located in $200{\sim}300m$ above the sea level, where hikers are prohibited from entering. In $500{\sim}600m$ above the sea level segment that has similar food environment and trail, it has shown the widest distribution. Further research is required on this segment for the excretion drops of Prionailurus bengalensis, a Grade II class of endangered species, were found on the trails.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.189-215
• /
• 2014

Since the launching of in 1963, a large amount of outstanding cartoons had been produced in China by the year 1980. During this period of time, international reputation was achieved with the extremely full expression and characteristic stories originated from Chinese culture. Decades of cartoons were produced ever year benefiting from support of the government in the last years. However, the quality and in fluence power dropped down comparing with the increasing productivity. The outward followed by examples of successful international box office most of the animation made in China. These cartoons did not obtain admitting internationally, or disclose any traditional speciality of China, although the domestic box office is considered to be fairly successful. The key factors to the successful cases should be analysed and researched rather than simply estimating, in order to achieve both artistic and commercial success. Factor of humor, as a key element of a successful cartoon is proposed in this thesis. Prior to the discussion, a general definition of humor factor is described through Henri Bergson's comedy concept, based on which the key factors of humor will be analysed. A classification system would be derived and introduced as a tool for the analysis of humor factors. According to Henri Bergson, Humor is determined by circumstance, language and character factors. Humor factors are divided into visual, scene and acoustic factors in this research taking the Speciality of cartoon media into consideration. It is the speciality that, in addition to the visual and language factors, multiple acoustic elements are also introduced in such a presentation pattern. This classification system would be considerably applicable to the analysis of humor factors in Chinese cartoons. In this study, around the year 2000 to share the Chinese animation masterpiece were analyzed by selecting and , and . This discussion about key factors of humor is likely to be beneficial to the development of Chinese Cartoons in the future.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.153-161
• /
• 2002

Sox4, a transcription factor, consists of three functional domains: an HMG-box domain as a DNA binding domain, serine rich region as a transactivation domain and glycine rich region (GRR), an unknown functional domain. Although Sox4 is known to be functionally involved in heart, B-cell and reproductive system development, its physiological function remains to be elucidated. We used pGEX expression system to develop a simple and rapid method for purifying Sox4 protein in suitable forms for biochemical studies of their functions. Unexpectedly, we observed that full-length Sox4 appears to be protease-sensitive during expression and purification in E. coli. To map the protease-sensitive site in Sox4, we generated various constructs with each of functional domains of Sox4 and purified as the GST-Sox4 fusion proteins using glutathione beads. We found that the specific cleavage site for the proteolytic enzyme, which exists in E. coli, is localized within the novel GRR of Sox4. Our study suggest that the GRR of Sox4 may a target for the cellular protease action and this cleavage in the GRR may be involved in regulating physiological function of Sox4. Additionally, our study may provide a useful method for investigating the proteolytic cleavage of the target molecule in E. coli.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.350-355
• /
• 2009

Bond strength depends on characteristics of bonding surface and restorative technique. The majority of studies dealing with dentin bond strength were carried out on flat bonding surface, therefore, difference of bond strength between axial wall and pulpal wall is not clear yet. This study evaluated bonding difference between cavity walls in class I composite resin restoration with different filling techniques. Twenty extracted caries-free human third molars were used. Cavities were prepared in 6 ${\times}$4 ${\times}$3 mm box-type and divided into four groups according to filling technique and bonding surface: Group I; bulk filling - pulpal wall, Group II; bulk filling - axial wall, Group III; incremental filling - pulpal wall, Group IV; incremental filling - axial wall. Cavities were filled with Filtek $Z250^{(R)}$(3M/ESPE., USA) and Clearfill SE $bond^{(R)}$(Kuraray, Japan). After 24 hour-storage in $37^{\circ}C$water, the resin bonded teeth were sectioned bucco-lingualy at the center of cavity. Specimens were vertically sectioned into 1.0 ${\times}$1.0 mm thick serial sticks perpendicular to the bond surface using a low-speed diamond saw (Accutom 50, Struers, Copenhagen, Denmark) under water cooling. The trimmed specimens were then attached to the testing device and in turn, was placed in a universal testing machine (EZ test, Shimadzu Co., Kyoto, Japan) for micro-tensile testing at a cross-head speed of 1 mm/min. The results obtained were statistically analyzed using 2-way ANOVA and t-test at a significance level of 95%. The results were as follows: 1. There was no significant difference between bulk filling and incremental filling. 2. There was no significant difference between pulpal wall and axial wall, either. Within the limit of this study, it was concluded that microtensile bond strength was not affected by the filling technique and the site of cavity walls.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.36-43
• /
• 2008

This purpose of this study was to examine the effect of planting density, growing medium and strength of a nutrient solution (National Horticultural Research Institute's nutrient solution: HRI's) on the growth and development of Oriental hybrid lily 'Le Reve' in a box cultivation. The planting density with 14, 18 and 22 bulbs had sprouting one day earlier than other treatments. Planting density of 22 bulbs flowered first, while six bulbs flowered the last, indicating that higher planting densities led earlier flowering. The increasing planting density increased stem length of cut flowers. On the other hand, cut flower quality was improved when the planting density was lower. The incidence of physiological disorders such as blasting was more frequent in planting density of 22, 18, and 14, indicating that higher planting densities caused higher incidences of physiological disorders. All planting densities except 22 bulbs displayed superior results in width, weight, number, and scale weight of the bulbs. Greater planting densities led to inferior bulb enlargement and an increased decomposition rate. pH decreased in all treatments after the bulb enlargement and decreased more as the planting density increased. Contents of P, K, Ca, and Mg increased, while contents of K and Ca decreased, as the planting density increased. The rice hull+coir (1:1, v/v) treatment was better than others, but did not show that much of a difference. Moreover, in bulbs enlargement after cut flower harvest, lily medium and perlite+peat moss treatments showed superior results, and decomposition rate was the greatest in the rice hull+coir (1:1, v/v) treatment. In the HRI's solution strength treatment from the period of flower bud emergence to flower harvest, higher solution strengths gave better cut flower quality in terns of length, weight, and number of flowers. The non-treated control and one third strength of a HRI's solution hastened flowering, indicating that lower strengths led to earlier flowering. According to the results of leaf analysis as affected by solution strength during the flower harvest, absorption rates of N and K were greater when the strength was higher, and Ca and Mg showed the same tendency. On the other hand, the absorption rate of P was the lowest in all treatments.