• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.483-494
• /
• 2006

In this paper, we propose a novel program specific information structure(PSI) in MPEG-2 system for a three-dimensional broadcasting system while guaranteeing compatibility with the conventional digital broadcasting system. The proposed PSI structure including a descriptor of contents type, 2D or 3D, provides service providers with a function of combining 2D and 3D contents freely. However the descriptor is ignored in the conventional digital broadcasting set-top box. With the proposed PSI structure, we designed and implemented a three-dimensional broadcasting system. The proposed system has 2D or 3D display mode for providing user's preference in a three-dimensional broadcasting environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.47-58
• /
• 2014

In this research, the initial sizing of a HALE(High Altitude Long Endurance) UAV which uses solar power and hydrogen fuel cell as an alternative energy was performed. Instead of a wing box type, a glider type was chosen since it is relatively easy to get a data thanks to many researches abroad. Maximum takeoff weight is around 150Kg and the propulsion system is composed of motor, propeller, solar cell, and hydrogen fuel cell which can be recharged through electrolysis. Maximum takeoff weight was estimated as aspect ratio, wing span, wing area change while considering energy balance of required energy which is necessary for flight during the entire day and available energy which can be taken from the solar cell.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.55-61
• /
• 2016

Organic fouling observed in submerged membrane filtration as a pretreatment for seawater desalination increases energy consumption for membrane operation because of requiring frequent chemical cleaning and membrane replacement. In membrane pretreatment for seawater facing with algae blooms, membrane fouling was observed in submerged microfiltration using sodium alginate model compound which is one of the main components of extracellular polymeric substances. Without aeration, aglinate fouling increased with its concentration while aeration reduced the alginate fouling effectively regardless of its concentration tested. In the absence of aeration, alingate fouling tended to be decreased with increasing calcium concentration. However, this effectiveness was reduced by increasing sodium chloride concentration. At high concentration of sodium chloride and calcium similar to the seawater conditions, aeration reduced initial fouling. However, as time progressed, the effect of increased airflow rate on fouling reduction was not significant, implying that optimum airflow rate to control alginate fouling in submerged microfiltration can exist.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.4
• /
• pp.320-328
• /
• 2007

This paper presents a stiffness modeling of a low-DOF parallel robot, which takes into account of elastic deformations of joints and links, A low-DOF parallel robot is defined as a spatial parallel robot which has less than six degrees of freedom. Differently from serial chains in a full 6-DOF parallel robot, some of those in a low-DOF parallel robot may be subject to constraint forces as well as actuation forces. The reaction forces due to actuations and constraints in each serial chain can be determined by making use of the theory of reciprocal screws. It is shown that the stiffness of an F-DOF parallel robot can be modeled such that the moving platform is supported by 6 springs related to the reciprocal screws of actuations (F) and constraints (6-F). A general $6{\times}6$ stiffness matrix is derived, which is the sum of the stiffness matrices of actuations and constraints, The compliance of each spring can be precisely determined by modeling the compliance of joints and links in a serial chain as follows; a link is modeled as an Euler beam and the compliance matrix of rotational or prismatic joint is modeled as a $6{\times}6$ diagonal matrix, where one diagonal element about the rotation axis or along the sliding direction is infinite. By summing joint and link compliance matrices with respect to a reference frame and applying unit reciprocal screw to the resulting compliance matrix of a serial chain, the compliance of a spring is determined by the resulting infinitesimal displacement. In order to illustrate this methodology, the stiffness of a Tricept parallel robot has been analyzed. Finally, a numerical example of the optimal design to maximize stiffness in a specified box-shape workspace is presented.

• Imaging Science in Dentistry
• /
• v.42 no.1
• /
• pp.5-12
• /
• 2012

Purpose : This study was performed to evaluate possible variations in maxillary and mandibular bone texture of normal population using the fractal analysis, particles count, and area fraction in intraoral radiographs. Materials and Methods : Periapical radiographs of patients who had full mouth intraoral radiographs were collected. Regions of interest ($100{\times}100$ pixels) were located between the teeth of the maxillary anterior, premolar, and molar area, as well as the mandibular anterior, premolar, and molar areas. The fractal dimension (FD) was calculated by using the box counting method. The particle count (PC) and area fraction (AF) analyses were also performed. Results : There was no significant difference in the FD values among the different groups of age, gender, upper, and lower jaws. The mean FD value was $1.49{\pm}0.01$. The mean PC ranged from 44 to 54, and the mean AF ranged from 10.92 to 11.85. The values of FD, PC, and AF were significantly correlated with each other except for the upper molar area. Conclusion : According to the results, patients with normal trabecular pattern showed a FD of approximately 1.5. Based on these results, further investigation would be recommended if the FD value of patient significantly differenct from this number, since the alteration of this value indicates microstructural modification of trabecular pattern of the jaws. Additionally, with periapical radiographs, simple and cost-effective, PC and AF could be used to assess the deviation from the normal.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.359-365
• /
• 2013

The high mobility group box 1 (HMGB1) protein is a multifunctional cytokine-like molecule that plays an important role in the pathogenesis of tumors. In this study, real-time polymerase chain reactions and Western blot assays indicated that HMGB1 transcriptional activity and protein level are increased in $Tax^+$-T cells (TaxP). To clarify the mechanisms, a series of HMGB1 deletion reporter plasmids (pHLuc1 to pHLuc6) were transfected into $Tax^-$-T cells (TaxN, Jurkat) and $Tax^+$-T cells (TaxP). We found that promoter activity in $Tax^+$-T cells to be higher than that in $Tax^-$-T cells, indicating a significant increase in pHLuc6. Bay11-7082 (NF-${\kappa}B$ inhibitor) treatment did not block the enhancing effect. Chromatin immunoprecipitation assays revealed that Tax was retained on a HMGB1 promoter fragment encompassing -1163 to -975. Bioinformatics analysis showed six characteristic cis-elements for CdxA, AP-1, AML-1a, USF, v-Myb, and C/EBP in the fragment in question. Mutation of cis-elements for C/EBP reduced significant HMGB1 promoter activity induced by Tax. These findings indicate that Tax enhances the expression of HMGB1 gene at the transcriptional level, possibly by interacting with C/EBP.

• Journal of the Korean Dietetic Association
• /
• v.13 no.2
• /
• pp.123-137
• /
• 2007

The purpose of this study was to investigate the current nutritional labeling practices in the processed foods industry. Package labels provide consumers with reliable nutritional information, which has been considered a useful aid for food selection and a potent educational tool for nutrition in a daily life. To assess the nutritional composition labeling and nutritional claims on the food package labels in the Korean market, 2,691 processed foods were purchased from a wholesale market in August, 2004, under the food categories specified in the 2004 Food Code. Nutritional composition labels were found on 674 out of the 2,691 processed foods items. The study findings were as follows. Milk and dairy products showed the highest percentage(56.6%) of nutritional composition labeling among the food categories, while 86.2% of processed foods carried inappropriate types of nutrition labels. The title of nutritional composition labeling was ordered according to the nutritional composition presented on the top part of the box. The regulations method which it indicates was 77.8%. The expression unit of the nutritional composition labeling was per 100g(32.8%) or per OOg (29.4%). Of total processed foods, 83(3.1%) offered nutritional claims in their labels. These claims were divided into two ways: nutrient content claims and nutrient comparative claims. The most frequently used term in nutrient content claims was "contained"(67.2%). "More" or "Plus" were frequently used term in nutrient comparative claims(11.2%). Calcium was the most popular among nutrients claimed by processed foods(34.3%).

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.5
• /
• pp.87-92
• /
• 1998

Ultr shallow p$^{+}$-n junction with Co/Ti bilayer silicidde contact was formed by ion implantation of BF$_{2}$ [energy : (30, 50)keV, dose:($5{\times}10^{14}$, $5{\times}10^{15}$/$\textrm{cm}^2$] onto the n-well Si(100) region and by RTA-silicidation and post annealing of the evaporated Co(120.angs., 170.angs.)/Ti(40~50.angs.) double layer. The sheet resistance of the silicided p$^{+}$ region of the p$^{+}$-n junction formed by BF2 implantation with energy of 30keV and dose of $5{\times}10^{15}$/$\textrm{cm}^2$ and Co/Ti thickness of $120{\AA}$/(40~$50{\AA}$) was about $8{\Omega}$/${\box}$. The junction depth including silicide thickness of about $500{\AA}$ was 0.14${\mu}$. The fabricated p$^{+}$ -n ultra shallow junction depth including silicide thickness of about $500{\AA}$ was 0.14${\mu}$. The fabricated p$^{+}$-n ultra shallow junction with Co/Ti bilayer silicide contact did not show any agglomeration or variation of sheet resistance value after post annealing at $850^{\circ}C$ for 30 minutes. The boron concentration at the epitaxial CoSi$_{2}$/Si interface of the fabricated junction was about 6*10$6{\times}10^{19}$ / $\textrm{cm}^2$./TEX>.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.114-123
• /
• 2014

Vehicle Black Box (Event Data Recorder EDR) only recognizes the general surrounding environments of load. In addition, general EDR is difficult to recognize the images of a sudden illumination change. It appears that the lens is being a severe distortion. Therefore, general EDR does not provide the clues of the circumstances of the accident. To solve this problem, we estimate the value of Normalized Luminance Descriptor(NLD) and Normalized Contrast Descriptor(NCD). Illumination change is corrected using Normalized Image Quality(NIQ). Second, we are corrected lens distortion using model of Field Of View(FOV) based on designed method of fisheye lens. As a result, we propose integration algorithm of two methods that correct distortions of images using each Gamma Correction and Lens Correction in parallel.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.75-81
• /
• 2014

The integral image is the sum of input image pixel values. It is mainly used to speed up processing of a box filter operation, such as Haar-like features. However, large memory for integral image data can be an obstacle on an embedded hardware environment with limited memory resources. Therefore, an efficient method to store the integral image is necessary. In this paper, we propose a memory size reduction hardware design for integral image. The hardware design is used two methods. It is the new integral image memory and modulo calculation for reducing integral image data. The new integral image memory has additional calculation overhead, but it is not obstacle in hardware environment that parallel processing is possible. In the Xilinx Virtex5-LX330T targeted experimental result, integral image memory can be reduced by 50% on a $640{\times}480$ 8-bit gray-scale input image.