• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.1
• /
• pp.47-51
• /
• 2004

To evolve silkworm hybrids with higher survival and productivity and easy and effective seed cocoon production, three new evolved bivoltine hybrids of silkworm (Bombyx mori L.), created with participation of sex-limited lines at eggs and larva stage were evaluated with control Super$_1$${\times}$Hessa$_2$ hybrid at Plovdiv Agrarian University during 2000 - 2002. ANOVA analysis was employed and the performance of hybrids was observed in respect of main quantitative traits. The results obtained show significant superiority of new hybrids T$_{15}$ 4/${\times}$TBV$_{2}$24/, XT$_{215}$38/${\times}$TV$_{3}$2/, XT$_{215}$38/${\times}$B$_{2}$6/ and their reciprocal crosses over the control. They were characterized with 99% hatchability of eggs, 93-95% silkworm survival, 2.32- 2.42 g cocoon weight, 53.5-55.7 cg shell weight, 22.9-23.1% shell ratio, 1,307-1,326 m filament length, 3.08-3.17 denier, 95-96% reelability, 44.4-45.1% silk ratio, 569-593 number of normal eggs per lying and 347-364 mg weight of normal eggs per lying. Newly evolved hybrids were manifested high productivity, 41.0-43.6 kg cocoon yield and 7.33-7.78 kg raw silk yield per one box (20,000$\pm$200 viable eggs), which significant surpass the control Super$_1$${\times}$Hessa$_2$ hybrid with 7.6-14.4% and 10.8-17.6%, respectively. T$_{15}$ 4/${\times}$TBV$_{2}$24/ and XT$_{215}$38/${\times}$TV$_{3}$2/ were considered as highly productive hybrids to local conditions and found suitable to rear in spring season.n.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.47-57
• /
• 2020

In Floating PV (Photovoltaic) systems, PV modules are installed on water by utilizing the surface of idle water such as a reservoir and multipurpose dam. A floating PV system, therefore, has the advantage of efficiency in national land use and improved energy yield owing to cooling effect compared to on-land PV systems. Owing to the limitation of installation environment for a floating PV system, the system, however, has the disadvantage of an increase in transmission distance of DC (Direct current) cables. A longer transmission distance of a DC cable results in greater power loss due to a voltage drop. This leads to a decline in economic feasibility for the floating PV system. In this paper, the economic analysis for 10 floating PV systems installed in a reservoir has been conducted in terms of a change in annual power sales according to the variation of transmission losses depending on the factors affecting the voltage drop, such as transmission distance, cross-section area of underwater cable, the presence of joint box, and PV capacity.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.1
• /
• pp.254-261
• /
• 2005

The effects on memory and learning ability of the Korean herbal medicine, Xingyo-tang(XGT, 神交湯), which consists of Ginseng Radix(人蔘) 4 g, Liriopis Tuber(麥門冬) 40 g, Morindae Officinalis Radix(巴戟天) 40 g, Biotae Semen(柏子仁) 20 g, Dioscoreae Rhizoma(山藥) 40 g, Euryales Semen(?實) 20 g, Scrophulariae Radix(玄蔘) 40 g, Salviae Miltiorrhizae Radix(丹蔘) 12 g, Poria(茯神) 12 g, Cuscutae Semen(免絲子) 40 g, was investigated. The effects of XGT on learning and memory performance were examined in normal or memory impaired mice by using avoidance tests, Pentobarbital -induced sleep test, fear conditioning task, novel object recognition task, and water maze task. Hot water extract from XGT was used for the studies. Learning ability and memory are based on modifications of synaptic strength among neurons that are simultaneously active. Enhanced synaptic coincidence detection leads to better learning and memory. The XGT-treated (30 mg/100 g and 60 mg/100 g, p.o.) mice exhibit superior ability in learning and memorizing when performing various behavioral tasks. XGT did not affect the passive avoidance responses of normal mice in the step through and step down tests, the conditioned and unconditioned avoidance responses of normal mice in the shuttle box, lever press performance tests, and the ambulatory activity of normal mice in normal condition. In contrast, XGT produced ameliorating effects on the memory retrieval impairment induced by ethanol. XGT also improved the memory consolidation disability induced by electric convulsive shock (ECS). XGT extended the sleeping time induced by pentobarbital dose-dependently, suggesting its transquilizing or antianxiety action. These results suggest that XGT has an improving effect on the impaired learning through the effects on memory registration and retrieval.

• The Plant Pathology Journal
• /
• v.30 no.4
• /
• pp.375-383
• /
• 2014

Fungi tolerate exposure to various abiotic stresses, including cytotoxic compounds and fungicides, via their ATP-driven efflux pumps belonging to ATP-binding cassette (ABC) transporters. To clarify the molecular basis of interaction between the fungus and various abiotic stresses including fungicides, we constructed a cDNA library from germinated conidia of Colletotrichum acutatum, a major anthracnose pathogen of pepper (Capsicum annum L.). Over 1,000 cDNA clones were sequenced, of which single clone exhibited significant nucleotide sequence homology to ABC transporter genes. We isolated three fosmid clones containing the C. acutatum ABC1 (CaABC1) gene in full-length from genomic DNA library screening. The CaABC1 gene consists of 4,059 bp transcript, predicting a 1,353-aa protein. The gene contains the typical ABC signature and Walker A and B motifs. The 5'-flanking region contains a CAAT motif, a TATA box, and a Kozak region. Phylogenetic and structural analysis suggested that the CaABC1 is a typical ABC transporter gene highly conserved in various fungal species, as well as in Chromista, Metazoans, and Viridiplantae. We also found that CaABC1 was up-regulated during conidiation and a minimal medium condition. Moreover, CaABC1 was induced in iprobenfos, kresoxim-methyl, thiophanate-methyl, and hygromycin B. These results demonstrate that CaABC1 is necessary for conidiation, abiotic stress, and various fungicide resistances. These results will provide the basis for further study on the function of ABC transporter genes in C. acutatum.

• Journal of Power System Engineering
• /
• v.15 no.1
• /
• pp.24-31
• /
• 2011

Rectangular box type structures are used in many fields of civil, mechanical and marine engineering. Especially, Most ship structures are often in contact with inner or outer fluid, like ballast, fuel and stem tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks in contact with fluid near engine and propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tanks. Many authors have studied vibration of rectangular tanks containing fluid. Few research on dynamic interaction among tank walls filled with fluid are reported in the vibration of rectangular tanks recently. In case of rectangular tanks, structural coupling between adjacent panels and effect of vibration modes of multiple panels on added mass of water have to be considered. In the previous report, a numerical analysis is performed for the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing breadth of the plates by using finite element method for plates and boundary element method for fluid region. In this paper, the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing length, thickness, and boundary condition of the plates are investigated numerically and discussed.

• The Journal of Korean Physical Therapy
• /
• v.28 no.5
• /
• pp.308-313
• /
• 2016

Purpose: This study investigated the effects of sex hormones across menstrual cycle phases on knee muscle activity during one-leg landing in non-athletic females. Methods: Twenty-six healthy females who reported normal menstrual cycles for the previous three months were tested when estrogen levels were highest (ovulation) and lowest (menstruation). Knee muscle activity was analyzed based on electromyography (EMG) data recorded during landing on a 30-cm box. Before data collection, each subject was trained in single-leg landing tasks ten times. Landing was analyzed by measuring the average of three landing tasks. EMG data were collected between the moment of ground contact and the point of knee maximum flexion. The maximum voluntary isometric contraction (MVIC) for normalization that was recorded as the EMG root-mean-square (RMS) during landing was tested, with paired t-tests used to assess differences in knee muscle activity according to menstrual cycle phases. Results: The results showed that the soleus, semitendinosus, and lateral gastrocnemius muscle activity during landing was differed significantly during ovulation compared to that during menstruation (p<0.05). No significant differences in vastus medialis activity were found between menstrual and ovulatory phases during landing (p>0.05). Conclusion: Changes in the menstrual cycle in response to sex hormones changed the activity of muscles around the knee during landing. Females utilize different muscle activity control strategies during different phases of the menstrual cycle, which may contribute to increased ACL injury risk.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.485-492
• /
• 2014

PURPOSE: This study aimed to examine the pain, range of motion (ROM), upper extremity task performance, and functional levels of patients after rotator cuff repair according to the timing of a closed chain exercise thereby presenting basic data for an effective rehabilitation program. METHODS: The intervention was applied three times per week, one hour per day, for four weeks to 40 participants, 78 of whom had undergone rotator cuff repair. The participants were divided into four groups and assigned to usual general physical therapy and an open chain exercise. Group I consisted of the open chain exercise only. The closed chain exercise was applied to group II after the 4 times, group III after the 7 times, group IV after the 10 times. Measurement were used ROM, visual analogue scale (VAS), box and block test (BBT), and shoulder pain and disability index (SPADI). A one-way analysis of variance was conducted to test differences. RESULTS: There were significant differences in the internal/external rotation between group I and group II. The VAS significantly differed between group II and group I, group III, and group IV. The BBT results of group II and group I were significantly different compared to those of group IV. The SPADI significantly differed between group II and group I and between group II and group IV. CONCLUSION: The closed chain exercise was effective for patients following rotator cuff repair from the second week after active exercise was prescribed, verifying its applicability in rehabilitation programs.

• Communications for Statistical Applications and Methods
• /
• v.15 no.1
• /
• pp.125-136
• /
• 2008

In many practical engineering design problems, the form of objective functions is not given explicitly in terms of design variables. Given the value of design variables, under this circumstance, the value of objective functions is obtained by real/computational experiments such as structural analysis, fluid mechanic analysis, thermodynamic analysis, and so on. These experiments are, in general, considerably expensive. In order to make the number of these experiments as few as possible, optimization is performed in parallel with predicting the form of objective functions. Response Surface Methods (RSM) are well known along this approach. This paper suggests to apply Support Vector Machines (SVM) for predicting the objective functions. One of most important tasks in this approach is to allocate sample data moderately in order to make the number of experiments as small as possible. It will be shown that the information of support vector can be used effectively to this aim. The effectiveness of our suggested method will be shown through numerical example which is well known in design of engineering.

• The Korean Journal of Applied Statistics
• /
• v.22 no.1
• /
• pp.41-57
• /
• 2009

The paper investigates the resources of the 232 countries based on the 39 resources of these countries. The data used in this work is from various sources like UN, CIA, World bank, OECD reports and the home pages of each country. The purpose of the study is to evaluate what resources are most influential to the wealth of a country, to the well-bring of the country, or the status of the country's development. For this, data visualization method is applied. Data visualization technique, although powerful for exploratory purposes, is dependent upon the users expertize and the interpretation is also dependent on the of the users. For objective methods of investigation, mutual information based on the Shanon's entropy theory is applied here. All the statistical methods employed in this paper are processed with DAVIS (Huh and Song, 2002)

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.127-142
• /
• 2005

The purpose of this study was to analysis biomechanics of the lower extremities injury the heights(40cm, 60cm, 80cm) of jump box as performed depth jump motion by 6 females aerobic athletes and 6 non-experience females students. The event of depth jump were set to be drop, landing and jump. The depth jump motions on the force plate were filmed using a digital video cameras, and data were collected through the cinematography and force plate. On the basis of the results analyzed, the conclusions were drawn as follows: 1. The landing time of skill group was shorter than unskill group at 40cm, 60cm drop height during drop-landing-jump phase especially. The landing time of 60cm drop height was significant between two group(p<.05). 2. The peak GRF of sagittal and frontaI direction following drop height improve was variety pattern and the peak vertical force of 40cm drop height was significantly(p<.05). 3. The magnitude of peak passive force was not increase to change the drop height. 4. The peak passive forces was significant at 40cm drop height between two groups(p<.05)