• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.94-100
• /
• 2006

The goal of this study is to show the way to increase the safety of deteriorated PSC beam bridges by the to-box reinforcing method. This method is to change the open girder section into the closed box section by connecting bottom flanges of neighboring PSC girders with the precast panels embedding PS tendons at the anchor block. The box section is composed of three concrete members with different casting ages, RC slab, PSC beam, precast panel. This different aging requires a time-dependent analysis considering construction sequences. Reliability index and failure probability are produced by the AFOSM reliability analysis. Transversely five schemes and longitudinally two schemes are considered. The full reinforcing scheme, transversely and longitudinally, shows the highest reliability index, but it requires more cost for retrofit. The partial reinforcing scheme 4, 4-1 are recommended in this study as the economically best scheme.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.95-101
• /
• 2006

It is well known that the thermal load in PSC(prestressed concrete) box-girder bridge is the principal cause of detrimental crack. The longitudinal stress caused by the lateral stress from the temperature gradient in slab of PSC box-girder bridge has a considerable influence on the durability and economy of bridge structures. As the basic study for the rational consideration of thermal load and the derivation of design guide, the inverse thermal analysis program for PSC box-girder bridges using field measurement data is developed. In this paper, thermal analyses are performed using field monitoring data for the sample PSC box-girder bridge. It is proposed that the link between monitoring program and the inverse analysis program is available.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1998.12a
• /
• pp.527-536
• /
• 1998

블록암호의 설계에서 S-box는 가장 중요한 요소이다. S-box의 크기는 기존공격에 대한 안전도와 수행 시 필요한 메모리량, 수행속도가 동시에 고려되어 선택되어야 한다. 일반적으로 S-box의 입출력의 크기가 커지면 안전도와 메모리 소요량은 크게 증가하며 수행속도는 저하된다. 한편, GF(2$^{n}$ )에서의 멱함수(power permutation)는 DC, LC에 강하므로 여러 암호에 적용되었으나 최근 고계차분공격(higher order differential attack)과 보간공격 (interpolation attack)에 의해 공격된 바 있다. 본문에서는 DC, LC, 고계차분공격, 보간공격에 안전한 S-box로서 GF(2$^{n}$ )에서의 멱함수인 $\chi$$^{-2}$ $^{k}$ (k < n)를 구성하고, n이 짝수일 때 메모리 소요량이 보다 적은 구현방법으로서 GF(2$^{n}$ 2/)의 연산을 이용하는 방법을 제시한다.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.672-677
• /
• 2005

The standard reference collection of strains for E. coli, the ECOR collection, was analyzed by a genome-based typing method. Seventy-one ECOR strains were subjected to repetitive extragenic palindromic PCR genome fingerprinting with BOX primers (BOX-PCR). Using a similarity value of 0.8 or more after cluster analysis of BOX-PCR fingerprinting patterns to define the same genotypes, we identified 28 genotypes in the ECOR collection. Shannon's entropy-based diversity index was 3.07, and the incident-based coverage estimator indicated potentially 420 genotypes among E. coli populations. Chi-square test of goodness-of-fit showed statistically significant association between the genotypes defined by BOX-PCR fingerprinting and the groups previously defined by multi-locus enzyme electrophoresis. This study suggests that the diversification of E. coli strains in natural populations is actively ongoing, and rep-PCR fingerprinting is a convenient and reliable method to type E. coli strains for the purposes ranging from ecology to quarantine.ine.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.114-114
• /
• 1997

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.281-284
• /
• 2002

Rijndael algorithm is known to a new private key block cipher which is substitute for DES. Rijndael algorithm is adequate to both hardware and software implementation, so hardware implementation of Rijndael algorithm is applied to high speed data encryption and decryption. This paper describes three implementation methods of Rijndael S-box, which is important factor in performance of Rijndael coprocessor. It shows synthesis results of each S-box implementation in Xilinx FPGA. Tllc lilree S-box implementation methods are implementation using lookup table only, implementation using both lookup table and combinational logic, and implementation using combinational logic only.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.435-440
• /
• 2001

In this study, torsional and lateral vibrations of a gear box transmission system were analyzed theoretically using some mathematical models and examined to determine the causes of its excessive vibrations. As the results, it was found there exist possibility of resonance between gear mesh frequencies and lateral vibration mode of the transmission shaft during the third shifting mode operation. In order to avoid this resonance, we proposed changing the arrangement of gears on the transmission shaft. The measured vibration levels of the improved gear box were dramatically reduced. These results may be helpful to design a machine tool gear box with low noise and vibration.

• Structural Engineering and Mechanics
• /
• v.61 no.3
• /
• pp.397-406
• /
• 2017

The use of fiber reinforced polymer (FRP) for torsional strengthening of reinforced concrete (RC) single cell box beams has been analyzed considerably by researchers worldwide. However, little attention has been paid to torsional strengthening of multicell box girders in terms of both experimental and numerical research. This paper reports the experimental work in an overall investigation for torsional strengthening of multicell box section RC girders with externally-bonded Carbon Fiber Reinforced Polymer CFRP strips. Numerical work was carried out using non-linear finite element modeling (FEM). Good agreement in terms of torque-twist behavior, steel and CFRP reinforcement responses, and crack patterns was achieved. The unique failure modes of all the specimens were modeled correctly as well.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.290-295
• /
• 1992

Tendon driven method to drive one joint using two actuators is developed and implemented. While the method has advantages over conventional transmissions, it also has several drawbacks like tendon slack, elongation and endurability. In this paper, a compensation method of the intrinsic non-linearities of tendon is proposed to improve the performance of antagonistic tendon driven method. In this method, tendon tension measurement is prerequisite which is measured with strain gauge type tension sensor. The developed method is implemented on one link test bed with colocated and non-colocated position sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1337-1342
• /
• 1990

This paper deals with control system design strategy for electrolmaginetic suspension (E.M.S.) system. For a successful control of E.M.S. system, the nature of E.M.S. system is deeply studied in the view point of non-linear, open-loop unstable, time-varying, non-minimum phase system. To find a special control treatment for E.M.S. system, analyses and simulations for various models are carried out. As one of the successful candidates, adaptive control concept is introduced and sample hardware system using digital signal processor is implemented.