• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.163-168
• /
• 2003

Analytical approach is applied to predict temperature of satellite box under worst hot condition from fairing jettison to separation. The box is tried to solve analytically which is exposed to known environmental heating condition and has internal heating and irradiation to space. For a single thermal mass, governing equation for temperature is simplified to 1st order ordinary differential equation(ODE) by several assumptions. Two cases are considered. The one is for constant mass box and the other is for mass-varying box. Each case has three different analytical solution by sign of constant term in ODE. One analytical solution for constant mass is applied to physical launch stage condition. It is concluded that the present analytical method can be used to quick predict the temperature of a satellite box and check whether a satellite is safe against space environment during launch stage.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.118-126
• /
• 1993

Static and dynamic crushing behaviors of composite box tube show the difference with those of metal tube. This paper investigates the characteristics of static and dynamic crushing test which were conducted to characterize the energy absorption and collapse mode of composite box tubes. Sixteen kinds of tube specimens were fabricated from[0/90] woven Glass/Epoxy fabric and autoclave cured. Axial crushing tests were performed using Instron and Dynatup Impact Tester. It is shown that collapse mode and energy absorption capacity can vary according to the aspect ratio, length, loading rate, lay-up direction of fabric, and trigger geometry of the composite box tube.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.10
• /
• pp.983-992
• /
• 2007

It was proposed to identify Thiele Small Parameters for loudspeaker attached to closed-box using known dynamic mass of moving parts. Also, enhanced PSPICE circuit model for closed-box loudspeaker system was proposed to more accurately simulate real closed-box loudspeaker system. Frequency dependent parameters were used to model voice coil inductor. Acoustic pressure response curves and electrical impedance curves were simulated and investigated by PSPICE circuit model according to compensation filter's parameters. Finally, proposed method is expected to be utilized for identification of pseudo Thiele Small parameters of microspeaker.

• Journal for History of Mathematics
• /
• v.11 no.2
• /
• pp.63-76
• /
• 1998

When teaching the linear regression analysis in the class, the power transformation must be introduced to fit the linear regression model for nonlinear data. Box and Cox (1964) proposed the attractive power transformation technique which is so called Box-Cox transformation. In this paper, an effective algorithm selecting an appropriate value for Box-Cox transformation is developed which is considered to find a value minimizing error sum of squares. When the proposed algorithm is used to find a value for transformation, the number of iterations needs to be considered. Thus, the number of iterations is examined through simulation study. Since SAS is one of most widely used packages and does not provide the procedure that performs iterative Box-Cox transformation, a SAS program automatically choosing the value for transformation is developed. Hence, the students could learn how the Box-Cox transformation works, moreover, researchers can use this for analysis of data.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.199-206
• /
• 2015

The purpose of this study was to investigate radiation dose sensitivity due to displacement of human extremities in the water bolus box on radiation therapy. Water bolus box and human thigh with femur bone were constructed in computerized radiation therapy planning system to verify the absorbed dose. Two 6MV X-ray beams were irradiated bilaterally into water bolus box and then radiation dose were calculated each situation at displacement of middle axis of thigh from the center in water bolus box to right and left direction. Absorbed dose of thigh and femur bone increased by the distance of displacement. The maximum dose of thigh even increased 20% over than prescribed dose. This is in contrast to conventional concept of dose distribution in water bolus box. Based on this result, displacement of body site in the water bolus box have to be averted during radiation therapy.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.128-136
• /
• 2001

This paper presents an optimum deck and girder system design for minimizing the life-cycle cost (LU) of steel box girder bridges. The problem of optimum LCC design of steel box girder bridges is formulated as that of minimization of the expected total LCC that consists of initial cost, maintenance cost, expected retrofit costs for strength, deflection, and crack. To demonstrate the effect of LCC optimum design of steel box girder bridges, the LCC optimum design is compared with conventional design method for steel box girder bridges design. From the numerical investigations, it may be positively stated that the optimum design of steel box girder bridges based on LCC will lead to more rational, economical and safer design.

• Korean Management Science Review
• /
• v.1
• /
• pp.68-80
• /
• 1984

Box-Jenkins 시계열 분석법은 변수에 관한 정보가 부족하거나 너무 많은 변수가 영향을 미치고 있는 경우에도 과학적인 예측치를 구할 수 있는 단기예측 방법이다. Box-Jenkins 모형은 자동회귀 모형(Autoregressive Model), 이동평균 모형 (Moving average Model), 계절적 시계열 모형을 통합한 일반적인 모형이기 때문에 특별한 불안정성을 보이지 않는 경우에는 모두 모형화 할 수 있으며, 모형에 관계된 계수의 수를 최소화 하면서 만족스러운 모형을 찾을 수 있다. Box-Jenkins예측방법은 모형선정, 매개변수추정, 적합성 검정의 3단계를 반복으로 수행함으로써 최적모형에 이르게 하게 하고 있기 때문에 최소의 가능한 모형으로부터 시작하여 부적당한 부분을 제거시켜 나감으로써 시행착오의 과정을 최소화 할 수 있다. 일반 사용자가 Box-Jenkins 시계열 분석법을 쉽게 사용할 수 있도록 Box-Jenkins Package가 개발되었으며 여기서는 KAIST 전산 개발 센터에 설치된 Package를 소개하고 그 사용예를 보였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.290-292
• /
• 2000

본 시스템은 1995년에 추진된 지역정보화 사업의 추진과제인 $\boxDr$공단중심의 지역정보시스템$\boxUl$을 확대 발전시키고 시스템 운영의 효율화를 도모하고자 DB를 통합하여 확대 재 구축함으로써 서비스 수준을 한 단계 높이고 인터넷을 통한 웹 정보 이용 활성화 차원에서 추진되었다. 기 구축되었던 $\boxDr$공단중심의 지역정보시스템$\boxUl$은 정보화를 통한 지역경제 발전에 일익을 담당하고자 관. 산. 연이 참여한 지역정보화 사업이다. 이번에 확대 개발된 $\boxDr$과학산업정보서비스시스템$\boxUl$은 연구개발정보센터와 광주광역시, (주)광주광역정보센터가 매칭펀드에 의한 대응자금으로 구축한 시스템으로 크게 10개 산업단지 기본정보, 입주기업체정보, 기업지원정보, 전문인력정보, S/W패키지정보, 장비/설비정보, 기술개발결과정보, 지역소장 도서정보 등을 중심으로 구성하였다. 특히 650여개 지역 기업체 홈페이지를 각각 개별적으로 특성 있게 구축하여 지역기업활동 지원 및 수출진흥을 도모하고 지역경제 활성화에 기여토록 하고자 한다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.65-73
• /
• 1999

Most psychophysical studies in manual material handling (MMH) have paid more attention to two-handed MMH activities than to one-handed MMH activities. Also, studies are involved only with single MMH activities - lifting, lowering, carrying, holding, pushing or pulling. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (lifting a box, then carrying the box, and lowering the box). The objective of this study was to find the psychophysical and physiological responses of human subjects from a simulated industrial task involving one-handed and two-handed combined tasks. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks - lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box from knuckle to floor height - were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. In addition to maximum acceptable weight, heart rate and RPE values on wholebody, back, and arm were also measured as responses.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.1012-1022
• /
• 2015

Conventional cryptographic algorithms are not sufficient to protect secret keys and data in white-box environments, where an attacker has full visibility and control over an executing software code. For this reason, cryptographic algorithms have been redesigned to be resistant to white-box attacks. The first white-box AES (WB-AES) implementation was thought to provide reliable security in that all brute force attacks are infeasible even in white-box environments; however, this proved not to be the case. In particular, Billet and others presented a cryptanalysis of WB-AES with 230 time complexity, and Michiels and others generalized it for all substitution-linear transformation ciphers. Recently, a collision-based cryptanalysis was also reported. In this paper, we revisit Chow and others's first WB-AES implementation and present a conditional re-encoding method for cryptanalysis protection. The experimental results show that there is approximately a 57% increase in the memory requirement and a 20% increase in execution speed.