• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.210-214
• /
• 2003

The static and dynamic characteristics of HDD slider with ulta-low flying height are analyzed using Direct Numerical method with Boundary Fitted Coordinate System. The slip flow effect is considered using the Boltzmann equation solution in a form of the flow rate database. The air film stiffness and damping are evaluated by the small perturbation method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.423-427
• /
• 1997

Recently, distributed piezoelectric actuators have drawn attention due to their potential applicability within smart structures. Because they serve not only as active components but also passive components, it is difficult to estimate their characteristics accurately. In this study a finite element method based on layerwise theory has been formulated to analyze the characteristics of the distributed piezoelectric actuators. The present method has the capability to describe more refined strain distribution and more realistic boundary conditions.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1987-1992
• /
• 2004

Hemodynamics behavior of the blood flow is influenced by the presence of the arterial stenosis. If stenosis is present in an artery, normal blood flow is disturbed. In the present study, characteristics of steady and pulsatile flow of non-Newtonian fluid, the effects of stenosised geometry are analyzed by numerical simulation. One interesting point is that non-symmetric solutions were obtained at severity stenosis, although the stenosis and the boundary condition were all axisymmetric.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.481-481
• /
• 2007

The characteristics of slow wave structure employed for backward wave oscillator expected to be a high power microwave source are studied analytically. The slow wave structure is a sinusodially corrugated wall waveguide. The waveguide is designed and transmitted characteristics for microwave are measured in the air. There exist literatures on high efficiency of enhansed radiation from backward wave oscillators involving plasmastudied experimentally another results.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.43.2-43.2
• /
• 2005

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.144.2-144.2
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.29.2-29.2
• /
• 2000

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.47-48
• /
• 2006

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1921-1936
• /
• 1999

In this paper, we analyze the blocking artifact in block transform-coded images and propose a classification algorithm which classifies each horizontal and vertical block boundary into four regions of EQ, BA, EE, and AE according to the characteristics of the blocking artifact. We also compare the performance of several blocking artifact reduction methods which can reduce blocking artifact in block transform-coded images well. As the blocking artifact reduction methods, the LOT, Kim's wavelet transform-based method, Yang's POCS, Paek's POCS, and Jang's CM have been selected. Experimental results show that each horizontal and vertical block boundary classified by using the proposed classification algorithm yields different characteristics of discontinuities due to the blocking artifact according to the classified region. It is also shown that the blocking artifact reduction methods using wavelet transform yield better performance over the other methods.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.143-161
• /
• 2020

In nanosized structures as the surface area to the bulk volume ratio increases the classical continuum mechanics approaches fails to investigate the mechanical behavior of such structures. In perforated nanobeam structures, more decrease in the bulk volume is obtained due to perforation process thus nonclassical continuum approaches should be employed for reliable investigation of the mechanical behavior these structures. This article introduces an analytical methodology to investigate the size dependent, surface energy, and perforation impacts on the nonclassical bending behavior of regularly squared cutout nanobeam structures for the first time. To do this, geometrical model for both bulk and surface characteristics is developed for regularly squared perforated nanobeams. Based on the proposed geometrical model, the nonclassical Gurtin-Murdoch surface elasticity model is adopted and modified to incorporate the surface energy effects in perforated nanobeams. To investigate the effect of shear deformation associated with cutout process, both Euler-Bernoulli and Timoshenko beams theories are developed. Mathematical model for perforated nanobeam structure including surface energy effects are derived in comprehensive procedure and nonclassical boundary conditions are presented. Closed forms for the nonclassical bending and rotational displacements are derived for both theories considering all classical and nonclassical kinematics and kinetics boundary conditions. Additionally, both uniformly distributed and concentrated loads are considered. The developed methodology is verified and compared with the available results and an excellent agreement is noticed. Both classical and nonclassical bending profiles for both thin and thick perforated nanobeams are investigated. Numerical results are obtained to illustrate effects of beam filling ratio, the number of hole rows through the cross section, surface material characteristics, beam slenderness ratio as well as the boundary and loading conditions on the non-classical bending behavior of perforated nanobeams in the presence of surface effects. It is found that, the surface residual stress has more significant effect on the bending deflection compared with the corresponding effect of the surface elasticity, Es. The obtained results are supportive for the design, analysis and manufacturing of perforated nanobeams.