• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.12
• /
• pp.1275-1281
• /
• 2001

Aqueous polymer solutions are known to have small pressure reduction. Paraffin slurries are known to have high thermal capacity. Paraffin particles are mixed into an aqueous polymer solution to make a new heat transfer fluid having high thermal capacity but low pressure reduction. The heat transfer characteristics of the new slurry was tested in a circular tube having a constant heat transfer boundary condition. The new slurry was found to have high Nusselt numbers as well as high thermal capacity and low pressure reduction in the laminar flow. The trends of the Nusselt numbers along the heating test section were studied for various heating conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.12
• /
• pp.1282-1287
• /
• 2001

This study presents the numerical analysis of natural convection of a micro- environments with air permeability in the clothing air-layer. As a numerical model the clothing air layer of shoulder and arm were adopted. Finite volume method for two-dimensional laminar flow was used for the analysis of flow and thermal characteristics of velocity, temperature and concentration in the air layer between body and clothing. As temperature boundary conditions, a body skin has a high temperature with $34^{\circ}C$ and the environmental temperatures are 5, 15 and $25^{\circ}C$ for various permeability coefficients. The distributions of concentration, temperature and velocity are shown that two large cells form at horizontal and vertical air layer, respectively. As the temperature difference between body skin and environment decreases, the heat transfer is decreased rapidly.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.29-35
• /
• 1992

Dielectric thin film of N/O (Si$_{3}N_[4}/SIO_{2}$) for high density stacked dynamic-RAM cell was formed by LPCVD and oxidation(Dry & pyrogenic oxidation methods) of the top Si$_{3}N_[4}$ film. The thickness, structure and composition of this film were measured by ellipsometer, high frequency C-V meter, high resolution TEM, AES, and SIMS. The thickness limit of Si$_{3}N_[4}$ film in making thin N/O structure layer was 7nm. In this experiment, the film with thinner than 7nm was not thick enough as oxygen diffusion barrier, and oxygen punched through the film and interfacial oxidation occurred at the phase boundary between Si$_{3}N_[4}$ and polycrystalline silicon electrode.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.18-18
• /
• 1998

평판에 충돌하는 초음속 세트에 관한 연구는 수직/단거리 이·착륙기의 발진, 미사일 발사시스템, 다단계 로켓 분리 등 실제적인 분야에 응용되고 있으며 고온의 충돌제트와 화염에 의한 가열문제와 관련된 산입분야에서도 많은 연구가 이루어지고 있다. 과소팽창하는 초음속 제트가 평판에 충돌할 때 Barrel shock, exhaust gas boundary, Mach disk, contact surface, reflected shock, plate shock, stagnation bubble 등 매우 복잡한 유동 구조가 표면에 나타나는데 이것은 평판으로부터 반사된 shock과 free jet의 충격파 구조 사이에서의 상호간섭 때문이다. 노즐로부터 방출되는 고속, 고온가스가 주변 장비 등에 부딪힐 때 발생하는 이러한 복잡한 간섭현상의 연구는 관련 주변장비 설계 및 상황예측에 필수적인 자료를 제공하며 이해를 도와준다.

• Structural Engineering and Mechanics
• /
• v.35 no.5
• /
• pp.645-658
• /
• 2010

In this study, the Differential Transform Method (DTM) is employed in order to solve the governing differential equation of a moving Bernoulli-Euler beam with axial force effect and investigate its free flexural vibration characteristics. The free vibration analysis of a moving Bernoulli-Euler beam using DTM has not been investigated by any of the studies in open literature so far. At first, the terms are found directly from the analytical solution of the differential equation that describes the deformations of the cross-section according to Bernoulli-Euler beam theory. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the differential equation of the motion. The calculated natural frequencies of the moving beams with various combinations of boundary conditions using DTM are tabulated in several tables and are compared with the results of the analytical solution where a very good agreement is observed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.1
• /
• pp.20-32
• /
• 1992

A numerical solution for heat transfer in the flue tube of a pulse combustion water heater was presented. The $k-{\varepsilon}$ turbulent model was adopted to describe turbulent characteristics and radiative heat transfer was calculated by P-N approximation. Three pulsating conditions equivalent to existing experimental studies were used for analysis. Pulsating pressure was specified at the inlet and outlet of flue tube and numerical procedure using control volume method and pressure boundary condition was presented. It was found that the present mathematical model and numerical method could predict effectively the flow field and heat transfer for the flue tube in pulse combustor.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.2
• /
• pp.30-34
• /
• 2011

Variable precision rough set models have been successfully applied to problems whose domains are discrete values. However, there are many situations where discrete data is not available. When it comes to the problems with interval values, no variable precision rough set model has been proposed. In this paper, we propose a variable precision rough set model for interval values in which classification errors are allowed in determining if two intervals are same. To build the model, we define equivalence class, upper approximation, lower approximation, and boundary region. Then, we check if each of 11 characteristics on approximation that works in Pawlak's rough set model is valid for the proposed model or not.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.419-423
• /
• 1989

The laboratory quench method used in this study is based on plunging a silver cylinder heated to 800.deg. C in to mineral oil and vegetable at given temperature. Experimental apparatus and measuring method followed Korean Industrial Standard. Colling curves at the boundary of the cylinder measured by a silver-alumel thermocouple is recorded throughout the quenching period. Using the cooling curves, the coolingability of the quenching oils at various temperatures were compared and discussed.

• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.626-631
• /
• 1996

Reactive dc magnetron sputtering 법을 이용하여 증착한 molybdenum mitride 박막의 Cu 확산 방지막 특성을 조사하였다. Cu 확산 방지막으로서 molybdenum nitride 박막의 열적안정성을 관찰하기 위하여 molybdenum nitride 박막 위에 Cu를 evaporation 법으로 증착하고 진공 열처리하였다. Cu/r-Mo2N/si 구조는 $600^{\circ}C$, 30분간 열처리 시까지 안정하였다. 확산 방지막의 파괴는 $650^{\circ}C$, 30분간 열처리 시부터 격자 확산(lattice diffusion)이나 입계(grain boundary)과 결함(defect)을 통한 확산에 의해 나타나기 시작하였고, 이 때 molybdenum silicide과 copper silicide의 형성에 기인된 것으로 생각되었다. 열처리 이후 Cu/r-Mo2N/Si 사이의 상호반응이 증가하였다. 이는 Rutherford backscattering spectrometry, Auger electron spectroscopy 그리고 Nomarski microscopy 등의 분석을 통해 조사되었다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.81-94
• /
• 2000

This study attempted to make a comparative investigation into architecture and fashion. It was intended to grasp the contemporary meaning of fashion expressed in fashion by investigating the image of lightness expressed in contemporary fashion. With the increasing trend of the characteristics of lightness over the whole field of contemporary design, this study took an opportunity to probe its understanding and a desirable direction of expression. The study results were summarized as follows: First, flexibility conveys comfortableness and lightness that makes people feel wear no costume in a soft and flowing style. This phenomenon is thought to express the desire to depart from the dismal and heavy ideology of the past times. Second, lightness is expressed as the virtual transparency felt from what is spatial. It shows a sense of openness while removing the internal and external boundary. Third, liberalness expresses the unfettered consciousness of freedom by expressing an open, free image through free, thin and transparent fashion.