• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.9
• /
• pp.876-883
• /
• 2009

The radiation of sound from a rectangular plate with a guided edge condition is investigated. By taking this particular boundary condition into account, simple analytical forms of the average radiation efficiency and radiation power based on the modal approach can be found, where the cross-modal terms can average out for all possible point excitation locations. Design variables of the plate such as thickness, aspect ratio, and damping that are closely related to the sound radiation are mainly discussed. The radiation power of the guided plate is found to be governed by the piston mode as well as the critical frequency. While both the radiation efficiency and the radiation power seem to be influenced by thickness and a large aspect ratio, damping loss factor seems less important to the radiation power. It is also shown that no clear corner and edge mode regions may be found for the guided case, unlike the pinned.

• Journal of the Korean Society of Visualization
• /
• v.2 no.2
• /
• pp.3-7
• /
• 2004

In this paper, computational aeroacoustics (CAA) method is used for flow-noise analysis and flow-noise visualization. High order high resolution scheme of optimized high order compact is used to resolve the small acoustic quantities and large flow quantities at the same time. An adaptive nonlinear artificial dissipation model and generalized characteristic boundary condition are also used. Aeolion tone noise, cavity noise, and jet noise are investigated. The visualizations of flow-noise are successful and characteristics of noise are studied. It is observed that the propagation directivity of noise is different with that of flow. With the help of CAA method, the visualization of noise is possible.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.140-143
• /
• 1997

The present study is concerned with the hydrostatic extrusion process of copper-clad aluminium bar to investigate the basic flow characteristics. Considering the bonding mechanism of bi-metal contact surface as cold pressure welding, the normal pressure and the contact surface expansion are selected as process parameters governing the bonding condition. The critical pressure required for the bonding at the interface is obtained by solving a "local extrusion" using a slip line meyhod. A viscoplastic finite element method is used to analyze the steady state extrusion process. The boundary profile of bi-metal rod is predicted by tracking a particle path adjacent to interface surface. The variations of contact surface area and the normal pressure along the interface profile are predicted and compared to those by experiments.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.47-55
• /
• 1997

Dynamic characteristics of the short circuit mode are investigated using the Volume of Fluid (VOF) method. When the initial molten drop volume, contact area and wire feed rate are given, rate change of the molten bridge profiles, pressure and velocity distributions are predicted. The electromagnetic force with proper boundary conditions are included in the formulation to consider the effects of welding current. It is found that the molten metal is transferred to the weld pool mainly due to the pressure difference caused by the curvatures in the initial stage, and electromagnetic force becomes dominant factor in the final stage of short circuit transfer. Necking occurs at the contact position between the molten drop and weld pool, and the initial molten drop volume and welding current have significant effects on break-up time.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.161-164
• /
• 2002

Polycrystalline and epitaxial heterostructure films of $La_{0.5}Sr_{0.5}CoO_{3}/Pb(Nb_{0.04}Zr_{0.28}Ti_{0.68})O_{3}/La_{0.5}Sr_{0.5}CoO_{3}$ (LSCO/PNZT/LSCO) capacitors were evaluated in terms of low voltage and high speed operation in high density memory, using TiN/Pt conducting barrier combination. Structural studies for a high density ferroelectric memory process flow, which requires the integration of conducting barrier layers to connect the drain of the pass-gate transistor to the bottom electrode of the ferroelectric stack, indicate complete phase purity (i.e. fully perovskite) in both epitaxial and polycrystalline materials. The polycrystalline capacitors show lower remnant polarization and coercive voltages. However, the retention, and high-speed characteristics are similar, indicating minimal influence of crystalline quality on the ferroelectric properties.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.4
• /
• pp.867-877
• /
• 2004

The sequential sampling inspection method is an extension of the multiple-sampling methods, and its theory is based on the sequential probability ratio test (SPRT) of Wald. In this paper, the characteristics of SPRT for testing the number of defects are approximated by using the estimated excess over the boundaries. The use of the estimated excess shows good performances in estimating the operating characteristic function and the average sample number of SPRT compared to the method by neglecting the excess. It also makes it possible to determine the boundary values which satisfy the desired error probabilities.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.107-118
• /
• 1995

Three-dimensional simulator for thermal oxidation process is developed. The simulator is consisted by two individual module, one is analytic-model module and the other is numerical-model module. The analytic-model which uses simple complementary-error function guarantees fast calculation in prediction of multi-dimensional oxidation process. The numerical-model which is based on boundary element method (BEM), has a good accuracy and suitable for various process conditions. The results of this study show that oxide growth is retarded at the corner of hole structure and enhanced at the corner of island structure. These effects are reson of different distribution of oxidant diffusion and mask stress. The utility of models and simulator developed in this study is demonstrated by using it to predict not only traditional shape of LOCOS but also process effects in small geometry.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.32-40
• /
• 2004

An extension of the density-gradient model to include the non-local transport effect is presented. The governing equations can be derived from the first three moments of the Wigner distribution function with some approximations. A new nonlinear discretization scheme is applied to the model to reduce the discretization error. We also developed a new boundary condition for the $Si/SiO_2$ interface that includes the electron wavefunction penetration into the oxide to obtain more accurate C-V characteristics. We report the simulation results of a 25-nm metal-oxide-semiconductor field-effect transistor (MOSFET) device.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.487-491
• /
• 2003

Design procedure of corrugated horn antenna for mm-wave frequency range is presented, and hybrid condition in horn is calculated. Balanced hybrid mode should be converted in the horn from TE11 mode by the proper corrugation dimensions which size are available to be fabricated under the mm-wave short wavelength condition. In this paper, corrugate profiles which satisfy both hybrid condition and fabrication possibility are obtained.. By cylindrical mode theory, the electromagnetic fields both inside hem and corrugation are delivered. Propagation characteristics in hem is calculated by the mode impedance matching method with boundary conditions, and radiation fields are obtained by the Kirchhoff-Hyugen principle to the hem aperture fields. A mm-wave corrugated horn operates on 85 - 115GHz is designed and fabricated, and results of measurement are also shown.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1679-1681
• /
• 1996

ZnO varistor with composition of 89wt%-ZnO, 3.0wt%-$Bi_{2}O_{3}$, 3.6wt%-$Sb_{2}O_{3}$, 1.16wt%-CoO, 0.88wt%-NiO, 0.71wt%-$MnO_2$, 0.93wt%-$Cr_{2}O_{3}$, 0.013wt%-$Al_{2}O_{3}$ was fabricated by sintering methods. The effects of annealing on the J-E characteristics of ZnO varistors were investigated. These changes of electric properties were found to be caused by the variation of grains and grain boundary related to annealing. And the conductive mechanism and micostructure of ZnO varistor were researched using I-V meter, SEM and XRD.