The study with the subjects of the female consumers of the fomentation rooms in their 20s, this research made an investigation of the fomentation wear. Also, dye-fastness experiments of the wear's colors against washing and sweating were held. The following are the conclusions; 1. Survey Results of the Present Situations of Fomentation Wear Designs of the fomentation wear, 88% belonged to a T-shirt (upper clothes) and knee pants. The primary colors of the wear were in the order of gray (37.5%), white (31.3%), orange (25%), indigo (18.8%), and yellowish (18.8%). 43% of the wear companies used the same color for two-piece clothes, and 57% employed different colors for upper and lower clothes. 2. Consumers' Attitude about Fomentation Wear The key problem in the attitude to the wear, 25.9% pointed out the worries about physical exposure (like breasts and legs) owing to the improperness in designs and sizes. 32.8% of the subjects were also worried about physical silhouette exposure following sweating. The need for design improvement was felt as the subjects expressed their intention to use better fomentation wear in design and materials if the fare is higher. 3. Experimental Results of the Dye fastness of the Fomentation Wear Dye-fastness experiments by sweating appeared in the order of gray > white > pink. The results by washing were gray & white > pink. As laundry grew in number, the grade of dye fastness fell a little bit. In the fomentation environment with more laundry and more perspiration, dye fastness of the wear's colors against washing and sweating should be fully considered.
Park, Yeong Ja;No Kwanghyun;Song Boo-Hee;Rhim Soo Kyung
Bulletin of the Korean Chemical Society
/
v.15
no.12
/
pp.1108-1112
/
1994
25-Acetoxy-26,27,28-trimethoxycalix[4]arene was synthesized by the treatment of calix[4]arene trimethyl ether with acetyl chloride in the presence of NaH. The solution conformation was inferred as a partial cone conformation based on the $^1H$-and $^{13}C$ NMR spectra. The crystal structure has been determined by X-ray diffraction method. The crystals are monoclinic, space group $P2_1$/n, a=8.186 (1), b=17.137 (2), c=19.878 (3) ${\AA}$, ${\beta}$=95.67 (1)$^{\circ}$, Z=4, V=2774.90 ${\AA}^3$, $D_c$= 1.22 g $cm^{-3}$, $D_m$=1.23 g $cm^{-3}$. The intensity data were collected on an Enraf-Noninus CAD-4 Diffractometer with a graphite monochromated $Cu-K{\alpha}$ radiation. The structure was solved by direct method and refined by full-matrix least-squares methods to a final R value of 0.054 for 3675 observed reflections. The molecule possesses a partial cone conformation with one flattened phenyl unit, in which one anisol ring, distal to the ester ring, is inverted. The acetoxyphenyl ring is flattened.
Kim, Sang Boo;Park, Woo Jae;You, Jea Woo;Lee, Ja Kyoung
Journal of the Korean Society of Systems Engineering
/
v.15
no.1
/
pp.16-24
/
2019
In this study, an improved method of setting the RAM goals for surveillance system using OMS/MP and field operations data of similar systems is suggested and a case study of surveillance system A is given. Newly suggested methods for setting the RAM goals consist of the procedures such as On/Off time analysis of configuration equipment based on OMS/MP, field operations data analysis of similar systems, adjustment of preventive maintenance time, the number of corrective maintenances, and TALDT in wartime, introducing new subsystem to reliability structure of surveillance system, and reflecting expert's opinion. A case study of surveillance system A shows that newly suggested method in this study for setting the RAM goals is reasonably acceptable and practically applicable to other similar systems.
The mechanical and electrical properties of ball grid array (BGA) solder joints were measured, consisting of Sn-3.5Ag, with organic solderability preservative (OSP)-finished Cu pads and Electroless Nickel/Immersion Gold (ENIG) surface finishes. The mechanical properties were measured by die shear test. When ENIG PCB was upper joint and OSP PCB was lower joint, the highest shear force showed at the third reflow. When OSP PCB was upper joint and ENIG PCB was lower joint, the highest shear force showed at the forth reflow. For both joints, after the die shear results reached the highest shear force, shear force decreased as a function of increasing reflow number. Electrical property of the solder joint decreased with the function of increasing reflow number. The scanning electron microscope results show that the IMC thickness at the bonding interface gets thicker while the number of reflow increases.
Proceedings of the Korea Information Processing Society Conference
/
2009.11a
/
pp.269-270
/
2009
이러닝 학습은 다양한 목적을 지닌 많은 대상들에게 눈부실만한 기여를 하고 있음에도 불구하고 이러닝의 특성을 가장 절실히 필요로 하는 장애인과 노인 등의 소외된 사람들에게 혜택을 주지 못하고 있다는 점은 안타까운 일이다. 이러한 현실에 대하여, 그동안 정보통신기술분야에서도 소외된 대상들을 고려한 접근성 관련 제도적 개선이 이루어져 왔다는 점을 상기한다면, 자성만이 아니라 그 이유를 조사할 필요가 있다. 따라서 본 연구의 목적은 이러닝 기업 CEO의 인식을 조사하여 웹 접근성과 관련한 제도적인 여건 속에서도 학습 환경에서는 여전히 접근성 개선이 이루어지지 않는 이유를 찾아보고 개선 방안을 제시하는 데 있다. 위의 목적을 위하여 현업에 종사하는 운영자와 개발자들을 대상으로 보편적 교수 설계을 위한 이러닝의 접근성 관련 인식을 조사하였다, 그 결과 이러닝 접근성에 대한 CEO의 인식은 매우 저조하며, 중요성에 대해서는 공감하나 비용적인 부담으로 인해 보편적 이러닝 콘텐츠 개발은 불가능하다고 생각하고 있었다. 이러닝 기업 CEO의 낮은 인식은 곧 개발자와 교수설계자들에게 접근성 기술 적용의 필요성을 강조하지 않는 결과를 초래하고 있다. 이에 대한 개선을 위해서는 우선 정부와 관련기관의 적극적인 홍보와 제도적 장치가 필수적이며, 현재 제공되는 이러닝의 접근성 개선을 위한 연구와 지원방안이 필요하며, 구체적으로는 보편적 학습설계와 접근성에 대한 교육과 확산을 위한 대안이 필요하다.
With the subjects of male consumers in their 20s to 40s living in the Ningbo area in Zhejiang Province, this study aims to investigate into the reality of their purchase attitude and size fitness of ready-made suits. The results are as follows; Looking into their demographic characteristics, 70.6% of the subjects were twenties, 60.6% were single, and educational career stood in the order of college, middle school, and high school graduation. They were largely absorbed in free trade, followed by teaching, commerce and service industry. 59.6% of them were Zhejiang Province belongs. One to two thousand yuan was the greatest portion of their monthly income. As for their purchase attitude of ready-made suits, they thought higher of material, quality, activity, and solidity than of design. They preferred to buy clothes at a department store. There was significant difference between purchase frequency and purchase price according to monthly income and jobs. Concerning brand recognition, the Chinese subjects favored "Youngor." Though Korea's brands were very lowly recognized, Korean products received really high recognition. Compared with China's brands, they found foreign brands excellent in design, followed by material/matter, wear, and sewing. As to their physical satisfaction and the size fitness of clothes, most subjects felt happy with their sizes. Trousers and jackets were among the unfitting suit items, while the girth of waist was the least satisfactory size. Therefore, in order to raise the market occupation rate of Korean suit goods in China, more aggressive marketing strategies are required to utilize the current Korean-style entertainment and maximize concerning brand images. In particular, outstanding products in consideration of prices should be made through the proper patternmaking to reflect the body types of the Chinese.
In this study, we developed a species-specific PCR assay for rapid and accurate detection of three Xanthomonas species, X. axonopodis pv. poinsettiicola (XAP), X. hyacinthi (XH) and X. campestris pv. zantedeschiae (XCZ), based on their draft genome sequences. XAP, XH and XCZ genomes consist of single chromosomes that contain 5,221, 4,395 and 7,986 protein coding genes, respectively. Species-specific primers were designed from variable regions of the draft genome sequence data and assessed by a PCR-based detection method. These primers were also tested for specificity against 17 allied Xanthomonas species as well as against the host DNA and the microbial community of the host surface. Three primer sets were found to be very specific and no amplification product was obtained with the host DNA and the microbial community of the host surface. In addition, a detection limit of $1pg/{\mu}l$ per PCR reaction was detected when these primer sets were used to amplify corresponding bacterial DNAs. Therefore, these primer sets and the developed species-specific PCR assay represent a valuable, sensitive, and rapid diagnostic tool that can be used to detect three specific pathogens at early stages of infection and may help control diseases.
This research checked about the necessity for the development of men's dress forms in the first investigation for the educational circle and the men's wear industry. Somatotype characteristics were analyzed in the second investigation of body measurement with the subjects of 200 male adults in their twenties residing in Busan. The following are the results of the present research to develop male dress forms for patternmaking: 1. In the group analysis for the characterization of front body types, three somatotypes were found and named H, Semi X, and Y. In the cluster analysis of side body types, four types were identified: D, I, d, and q. In the combination of front and lateral body types, four kinds were chosen: semi X-I, semi X-q, semi Y-I, and Y-q. 2. Through the comparison of plane figures by the plaster method as well as horizontal and vertical cross sections by the sliding gauge method, semi X-I was finally chosen as the standard somatotype for male dress form development. 3. Compared with the sliding gauge method of the present dress forms, the research dress form reflected better the shapes of the parts of the back and hips and the position of the waist, especially for males in their 20's. In addition, the dress form in the current research had superior points in all the items of clothing evaluation. Based on the above results, the sizes and models of the men's dress forms for patternmaking were developed.
This research suggest the correspondent sizes of women's and men's ready-made clothes to export to China on the basis of KS size specification. The results of this study, with the cooperation of Sejung and Searte Companies exporting clothes to Ningbo City, Zhejiang Province in China, are as follows: 1. Corresponding Dimensions of China Women's Clothes According to Morrison's relative deviation method, the body measurement characteristics of Chines and Korean women in their 30s and 40s were compared. As a result, Chinese women were bigger in height, arm length, abdomen girth, and upper arm girth but smaller in shoulder length and shoulder width. The cluster analysis for body type classification was as follows: Type 1, tall and well-developed, was 34.8%. Type 2 with weaker upper body, medium height, narrow shoulders and a slim waist was 45%. Type 3 with stronger upper body, shortest height and wide shoulders was 20.2%. 2. Corresponding Dimensions of China Men's Clothes Based on the drop standard of KS K 0050, the body types of Chinese men in their 20s were classified. A body types were 55.77%, Y body types were 32.16%, B body types were 11.55% and BB body types were 1.51%. According to the criteria of ready-made dimensions of normal body type suggested in Korea Standards, and in consideration of the basic distribution reality of body dimensions, representative 5 sizes were selected. 3. The corresponding size specification of China women's and men's clothes based on those of KS size specification were presented here, showing product sizes and physical items in detail.
This study were to grasp the present situation of the pet wear market and the problem of pet wear, and to develop the pet wear pattern which agrees well to dog's shape and movements. We carried out survey research to analyze the actual pet wear market condition for a dog-lover, and movement analysis and sensory test to develop a pattern for Maltese which was the favorite dog among Korean. For data analysis, ANOVA with duncan test, T-test were conducted using SPSS statistic program(ver. 10.0). The results are as follows: 1. The results of the survey research, 75% of dog-lover had a pet wear and favorite was T-shirts. The problems of wearing T-shirts were 'too tight seam sleeve and bodice(front legs hole)', 'the clothes easily hang down' and 'easily taken off due to large neck size'. 2. The ease amount of the developed pattern was given according to the results of dog's shape and movement analysis, and the results of sensory test, there is a significant difference in the following items: depth of front neck line, front chest${\to}$abdomen curve, ease amount of sleeve, comfort level of leg parts. 3. The size of each parts of the developed pattern in this study were as follows : neck girth 27.0cm, body girth 40.0cm, back length 26.0cm, front leg girth 23.0cm, sleeve length 20.7cm, sleeve width 14.4cm. But, there exists some limits to generalize these results since dog's body size and shapes are various according to dog species. Therefore, further studies are needed to develop each pet wear pattern for each dog species.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.