• Asian-Australasian Journal of Animal Sciences
• /
• 제3권2호
• /
• pp.125-133
• /
• 1990

The effect of dietary protein-energy restriction (PER) on the growth of long bone were examined in sheep during growing period and then following a cycle of reproduction. Three months-old female sheep were offered protein-energy restricted feed for 6 months (growing period), thereafter changed to normal nutritional conditions for 8 months (reproduction period). A half of animals in each group took pregnancy, parturition and lactation. The nutritional restriction reduced the growth in bone diameter more than that in bone length. Compensatory growth resulting from the removal of the nutritional restraint strongly occurred in bone diameter, especially the bone cortical width, as compared to bone longitudinal growth. A cycle of reproduction severely decreased the growth in the bone cortical width relative to that in the bone width, and little effect was found on the growth in bone length and bone mass. The depression of bone development by pregnancy and lactation tended to exhibit severer in animals having received normal nutrition than in those having received PER. Bone mineral density was not affected by the nutritional restriction. A cycle of reproduction had an adverse effect on the mineral density between in animals having received normal nutrition and in those having received PER.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.41.1-41.6
• /
• 2016

Background: The goal of this study was to retrospectively evaluate the prognosis of minimal invasive horizontal ridge augmentation (MIHRA) technique using small incision and subperiosteal tunneling technique. Methods: This study targeted 25 partially edentulous patients (10 males and 15 females, mean age $48.8{\pm19.7years$) who needed bone graft for installation of the implants due to alveolar bone deficiency. The patients took the radiographic exam, panoramic and periapical view at first visit, and had implant fixture installation surgery. All patients received immediate or delayed implant surgery with bone graft using U-shaped incision and tunneling technique. After an average of 2.8 months, the prosthesis was connected and functioned. The clinical prognosis was recorded by observation of the peri-implant tissue at every visit. A year after restoration, the crestal bone loss around the implant was measured by taking the follow-up radiographs. One patient took 3D-CT before bone graft, after bone graft, and 2 years after restoration to compare and analyze change of alveolar bone width. Results: This study included 25 patients and 39 implants. Thirty eight implants (97.4 %) survived. As for postoperative complications, five patients showed minor infection symptoms, like swelling and tenderness after bone graft. The other one had buccal fenestration, and secondary bone graft was done by the same technique. No complications related with bone graft were found except in these patients. The mean crestal bone loss around the implants was 0.03 mm 1 year after restoration, and this was an adequate clinical prognosis. A patient took 3D-CT after bone graft, and the width of alveolar bone increased 4.32 mm added to 4.6 mm of former alveolar bone width. Two years after bone graft, the width of alveolar bone was 8.13 mm, and this suggested that the resorption rate of bone graft material was 18.29 % during 2 years. Conclusions: The bone graft material retained within a pouch formed using U-shaped incision and tunneling technique resulted with a few complications, and the prognosis of the implants placed above the alveolar bone was adequate.

• 대한치과교정학회지
• /
• 제32권5호
• /
• pp.361-373
• /
• 2002

이번 연구의 목적은 골격성 III급 부정교합자의 악교정 수술 전과 수술 후의 하악전치부 치조골의 형태 변화를 평가하는 것이다 : 하악지 시상골분할절단술만을 시행받은 30명의 성인 골격성 III급 부정교합자를 대상으로 하였다. 초진시와 수술 전과 수술 후 3개월이 경과하였을 때의 측모두부규격방사선 사진을 비교하였다 골격과 하악이부의 계측치를 비교하였으며 이들 사이의 상관성 분석을 시행하여서 다음과 같은 결과를 얻었다. 1. 술전교정후군과 악교정수술후군에서 치료전군에 비해 하악전치부의 순측과 설측의 치조골 높이가 감소하였다. 2. 치조골 기저부의 전후방적인 폭경은 두개안면골격의 수직계측항목과 역상관관계를, IMPA와는 순상관관계를 보였다(P<0.01). 3. 하악이부 계측항목중 하악이부의 장경과 폭경은 두개안면골격과 상관관계를 보이지 않았다. 4. 순측의 치조골 높이와 설측의 치조골 높이는 순상관관계를 나타냈지만(p<0.001), 설측의 치조정의 폭경과는 역상관관계를 보였다(p<0.01). 순측과 설측의 치조정의 폭경은 역상관관계를 보였다(p<0.05). 하악이부의 장경과 폭경은 서로 순상관관계를 보였다(p<0.01). 5. IMPA와 LISA는 순, 설측치조골의 장경과 설측의 치조골 폭경과는 역상관관계를 보였지만, 순측치조골폭경과는 순상관관계를 보였다

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.165-171
• /
• 2021

Purpose: This study aimed to evaluate the effect of collimator width on effective atomic number (EAN), relative electron density (RED), and stopping power ratio (SPR) measured by dual-layer dual-energy computed tomography (DL-DECT). Methods: CIRS electron density calibration phantoms with two different arrangements of material plugs were scanned by DL-DECT with two different collimator widths. The first phantom included two dense bone plugs, while the second excluded dense bone plugs. The collimator widths selected were 64 mm×0.625 mm for wider collimators and 16 mm×0.625 mm for narrow collimators. The scanning parameters were 120 kVp, 0.33 second gantry rotation, 3 mm slice thickness, B reconstruction filter, and spectral level 4. An image analysis portal system provided by a computed tomography (CT) manufacturer was used to derive the EAN and RED of the phantoms from the combination of low energy and high energy CT images. The EAN and RED were compared between the images scanned using the two different collimation widths. Results: The CT images with the wider collimation width generated more severe artifacts, particularly with high-density material (i.e., dense bone). RED and EAN for tissues (excluding lung and bones) with the wider collimation width showed significant relative differences compared to the theoretical value (4.5% for RED and 20.6% for EAN), while those with the narrow collimation width were closer to the theoretical value of each material (2.2% for EAN and 2.3% for RED). Scanning with narrow collimation width increased the accuracy of SPR estimation even with high-density bone plugs in the phantom. Conclusions: The effect of CT collimation width on EAN, RED, and SPR measured by DL-DECT was evaluated. In order to improve the accuracy of the measured EAN, RED, and SPR by DL-DECT, CT scanning should be performed using narrow collimation widths.

• 소성∙가공
• /
• 제23권3호
• /
• pp.139-144
• /
• 2014

In the current study, we present a new model for predicting width spread of a slab with a dog-bone shaped cross section during rolling in the roughing train of a hot strip mill. The approach is based on the extremum principle for a rigid plastic material and a three dimensional admissible velocity field. The upper bound theorem is used for calculating the width spread of the slab. The prediction accuracy of the proposed model is examined through comparison with the predictions from 3-D finite element (FE) process simulations.

• Journal of Periodontal and Implant Science
• /
• 제35권1호
• /
• pp.251-261
• /
• 2005

Alveolar ridge defects may limit or restrict placement of implants. The purpose of this study was to evaluate clinical and histopathologic results which occur following guided bone regeneration using platelet-rich plasma, bovine bone powder and e-PTFE membrane in the localized alveolar bone defects. Ten patients who required guided bone regeneration in implant placemnet, were slelected. Alveolar crest height and width were measured at baseline and, afer 2nd surgery 5 months later At 5 months , we obtained histopathological results as follows: 1. Alveolar crest height was an average of $8.20{\pm}3.74$ mm preoperatively and decreased to an average of $7.40{\pm}1.84$ mm postoperatively. There was no significant difference. 2. Alveolar crest width was an average of $4.25{\pm}2.03$ mm preoperatively and significantly increased to an average of $7.20{\pm}2.44$ mm postoperatively (P<0.01) 3. The change of Alveolar crest height and width were $0.80{\pm}1.40$ mm, $2.95{\pm}1.09$ mm 4. Histopathological evaluations revealed new bone formation with graft material and laminated bone containing the presence of osteocyte-like cell In conclusion, guided bone regeneration using platelet-rich plasma, bovine bone powder and e-PTFE membrane would provide a viable therapeutic alternative for implant placement in the localized alveolar defect or implant failure

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.506-521
• /
• 2007

Statement of problem: The cumulative success rate of wide implant is still controversial. Some previous reports have shown high success rate, and some other reports shown high failure rate. Purpose: The aim of this study was to analyze, and compare the biomechanics in wide implant system embeded in different width of crestal bone under different occlusal forces by finite element approach. Material and methods: Three-dimensional finite element models were created based on tracing of CT image of second premolar section of mandible with one implant embedded. One standard model (6mm-crestal bone width, 4.0mm implant diameter central position) was created. Varied crestal dimension(4, 6, 8 mm), different diameter of implants(3.3, 4.0, 5.5, 6.0mm), and buccal position implant models were generated. A 100-N vertical(L1) and 30 degree oblique load from lingual(L2) and buccal(L3) direction were applied to the occlusal surface of the crown. The analysis was performed for each load by means of the ANSYS V.9.0 program. Conclusion: 1. In all cases, maximum equivalent stress that applied $30^{\circ}$ oblique load around the alveolar bone crest was larger than that of the vertical load. Especially the equivalent stress that loaded obliquely in buccal side was larger. 2. In study of implant fixture diameter, stress around alveolar bone was decreased with the increase of implant diameter. In the vertical load, as the diameter of implant increased the equivalent stress decreased, but equivalent stress increased in case of the wide implant that have a little cortical bone in the buccal side. In the lateral oblique loading condition, the diameter of implant increased the equivalent stress decreased, but in the buccal oblique load, there was not significant difference between the 5.5mm and 6.0mm as the wide diameter implant. 3. In study of alveolar bone width, equivalent stress was decreased with the increase of alveolar bone width. In the vertical and oblique loading condition, the width of alveolar bone increased 6.0mm the equivalent stress decreased. But in the oblique loading condition, there was not a difference equivalent stress at more than 6.0mm of alveolar bone width. 4. In study of insertion position of implant fixture, even though the insertion position of implant fixture move there was not a difference equivalent stress, but in the case of little cortical bone in the buccal side, value of the equivalent stress was most unfavorable. 5. In all cases, it showed high stress around the top of fixture that contact cortical bone, but there was not a portion on the bottom of fixture that concentrate highly stress and play the role of stress dispersion. These results demonstrated that obtaining the more contact from the bucco-lingual cortical bone by installing wide diameter implant plays an important role in biomechanics.

• Imaging Science in Dentistry
• /
• 제31권4호
• /
• pp.199-204
• /
• 2001

Purpose : To assess the relationship between soft tissue asymmetry and bone tissue asymmetry using the standardized photographs and the posteroanterior (PA) cephalometric radiographs in mandibular asymmetric patients. And to clarify that the lack of morphologic balance among different skeletal components can often be masked by compensatory soft tissue contributions. Methods: Experimental group consisted of 58 patients whose chief complaints were facial asymmetry, they were taken with standardized facial photographs and PA cephalometric radiographs. Control group consisted of 30 persons in the normal occlusion. The reproducibility of the facial photograph was confirmed by model test. The differences of fractional vertical heightand horizontal width from standardized facial photographs and PA cephalometric radiographs were compared and analyzed. Results: The difference of fractional vertical bone height was 0.63 and fractional vertical soft height was 0.58 in control group, 3.10 and 2.01 in asymmetric group, respectively. The difference of fractional horizontal bone width was 0.52 and fractional horizontal soft width was 0.70 in control group, 2.51 and 1.70 in asymmetric group, respectively. Both soft and bone tissue showed significant difference between control and asymmetric group (p<0.05). The difference of bone tissue was greater than that of soft tissue (p<0.05) in the experimental group but, not in control group. Conclusions: Soft tissue components may compensate for underlying skeletal imbalances.

• 대한치과의사협회지
• /
• 제57권12호
• /
• pp.768-777
• /
• 2019

Alveolar bone resorption are unpredictable and always occur after tooth extraction. Such bone resorption causes insufficient alveolar ridge which make implant placement difficult. There are many techniques to increase the alveolar ridge. Representative procedures include ridge split, guided bone regeneration, bone graft using autogenous block bone, and alveolar distraction. In each procedure, there are indications and complications. Depending on the shape and the width of bone defects, we can choose procedures for horizontal bone augmentation and vertical bone augmentation.

• Journal of Periodontal and Implant Science
• /
• 제31권2호
• /
• pp.477-488
• /
• 2001

The present study evaluated of regeneration effect of platelet rich plasma on the treatment of grade II furcation involvement, with coralline calcium phosphate bone in humans. 30 teeth with grade II furcation defect were selected and 15 teeth(control) were treated with coralline calcium phosphate bone, the others(test) were treated with coralline calcium phosphate bone and platelet rich plasma. Pocket depth, clinical attachment level, width of keratinized gingiva width were measured at baseline, postoperative 3, 6months. from cementoenamel junction to alveolar crest and fundus were measured at baseline, 6months(re-entry). Both groups were statistically analyzed by Wilcoxon signed Ranks Test & Mann-whitney Test using SPSS program(5% significance level). The results were as follows: 1. Pocket depth, clinical attachment level, keratinized gingva width, cementoenamel junction - alveolar crest, cementoenamel junction - fundus were not differ significantly in both groups at baseline 2. The change of pocket depth, clinical attachment level, keratinized gingva width, cementoenamel junction - alveolar crest, cementoenamel junction - fundus in both groups were decreased significantly at 3, 6months(p<0.05). 3. The change of pocket depth, clinical attachment level in test group decreased significantly than control at 3, 6months(p<0.05). 4. The change of keratinized gingiva width, cementoenamel junctional - alveolar crest, cementoenamel junction - fundus were not differ significantly in both groups at 3, 6months. 5. The pocket depth, clinical attachment level, keratinized gingiva width exhibited marked changes at 3 months in both groups. In conclusion, the results of this study suggest that platelet rich plasma have adjunctive clinical treatment effect to periodontal regeneration in grade II furcation defects.