• 제목/요약/키워드: bone quality

검색결과 700건 처리시간 0.032초

상완골 근위부 분쇄성 골절 및 탈구에서 시행한 견관절 반치환술 (Hemiarthroplasty in Comminuted Fracture and Dislocation of the Proximal Humerus)

  • 황성관;김용석
    • Clinics in Shoulder and Elbow
    • /
    • 제1권2호
    • /
    • pp.205-211
    • /
    • 1998
  • 저자들은 상완골 근위부의 골절탈구로 일차성 견관절 반치환술로 치료받은 환자 25례중 14례를 대상으로 치료결과를 분석하여 다음과 같은 결론을 얻었다. 1. 전례에서 동통은 소실되거나 완화되었으나 Neer의 평가에 따라 총 14례중 5례에서만 만족할만 한 결과를 믿었으며 나머지 9례에서는 불만족한 결과를 보였다. 2. 수상시 상완곤두의 분쇄상이 심하거나, 수술이 지연되어 골편치 연화가 심한 경우 상완골 길이와 humeral offset의 유지가 힘들었으며, 견관절 반치환술 시팽한 측이 정상측보다 1cm 이상 단축을 보인 경우가 5례였으며 이 경우 능동적 견관절 운동범위가 정상측보다 감소되었다. 3. 견관절 반치환술은 분쇄상 상완골 근위부 골절에서 사용되어지며 동통의 감소와 기능의 호전은 있으나 완전한 회복은 어려우며 수술시 연부조직 손상이 적고 적당한 후염각, 결절의 재건 과 회전근개의 수복은 필수적이다. humeral offset과 길이의 유지는 술 후 능동적 견관절 운동 범위의 향상에 영향을 미치며 아울러 환자의 협조하에 체계적인 재활운동이 필요할 것으로 사료된다.

  • PDF

골연부조직 종양 전공자가 아닌 일반 정형외과 전문의에 의해 치료된 연부조직육종 (Treatment of soft Tissue Sarcoma by General Orthopedic Surgeon Rather than Orthopedic Oncologist)

  • 이순혁;박종훈;박상원;채인정;한승범;이석하;김호중
    • 대한골관절종양학회지
    • /
    • 제13권2호
    • /
    • pp.75-80
    • /
    • 2007
  • 목적: 저자들은 골연부조직 종양 전공자가 아닌 타 분야의 경험 있는 수련병원의 정형외과 전문의에 의해 치료된 연부조직육종 환자의 치료과정을 분석하여 치료의 적절성 여부를 보고자 하였다. 대상 및 방법: 1997년 7월부터 2006년 9월까지 본원을 방문하여 연부조직육종으로 진단받은 25명의 환자를 대상으로 하였다. 분석은 초진 방법과 수술적 치료와 보조적 치료 그리고 추시 관찰의 적절성 유무를 종양 치료의 원칙에 따라 조사하였다. 결과: 남자는 16례 여자는 9례였으며 최종 수술 전 생검을 시행한 경우는 9례(36%)였다. 광범위 절제술이 시행된 경우는 13(52%)례 였으며, 조직검사 결과를 근거로 악성도를 판명할 수 있었던 12례 중 수술과 술 후 보조적 치료가 동시에 적절했던 경우는 총 4(33.3%)례에 불과했다. 한편 적절한 검사 방법에 의해 이루어진 추시는 4례 (16%)였다. 결론: 예상외로 많은 수의 연부조직육종 환자들이 임상 경험이 풍부한 수련병원의 전문의들에게 조차 부적절한 치료를 받고 있다. 경험 많은 전문의를 포함한 모든 정형외과 전공자들에게 연부조직육종의 치료에 대한 전반적이고 강화된 교육이 필요 할 것으로 사료된다.

  • PDF

자기공명영상에서 프로토콜 변화를 이용한 금속인공물의 영상평가 (Evaluation of image quality for metal artifact using protocol parameters in the MRI)

  • 이수현;김도경;김요한;염혜정;이헌준;임주연;최우전;김동현
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 추계학술대회
    • /
    • pp.582-585
    • /
    • 2015
  • 고령화 사회로 인한 관절 질환 환자의 증가로 TKRA(Total Knee Replacement Arthroplasty)가 증가하고 있다. 이에 따라 TKRA에 사용되는 인공관절에 의해 MRI영상에서 금속인공물이 발생하게 되는데 이는 진단에 영향을 미치게 된다. 그러므로 본 논문에서는 Co-Cr, Ni-Ti 소재의 인공관절과 시퀀스 변화를 주어 영상에서의 영향을 최소화시켜 진단의 효과를 높이고자 한다. 1.5T AVANTO장비와 플라스틱 통, 각각의 인공관절(Normal, Co-Cr, Ni-Ti)을 사용하였으며 종이컵 안에 인공관절을 고정시킨 후 원통 모양의 플라스틱 통 안에 넣어 신호강도를 측정하였다. 균일하고 강한 신호강도를 획득하기 위하여 플라스틱 통은 물로 채웠다. 시퀀스는 T1 TSE, T2 TSE, PD TSE로 변화하면서 실험하였고 Axial영상을 획득하였다. 신호강도는 동일한 크기의 관심영역을 설정하여 최대값, 최소값을 제외한 후 평균을 구해 SNR, CNR을 측정하고 Image J를 이용해 PSNR을 측정하였다. 결과적으로 PD TSE가 T1 TSE, T2 TSE에 비하여 SNR과 CNR 값이 크게 나타나왔고 Co-Cr이 Ni-Ti에 비하여 PSNR의 수치도 크게 나타나고 Normal의 SNR 값과 유사하게 나타난 것으로 보아 PD TSE의 시퀀스와 Co-Cr의 합금을 사용하는 것이 진단 및 판독을 하는데 있어서 유용할 것으로 사료된다.

  • PDF

조혈줄기세포이식후 발생한 이식편대숙주병의 구강병소에 대한 최소침습적 레이저조직생검 증례 (Minimally Invasive Laser-Assisted Biopsy of the Oral Lesions for Oral Graft-Versus-Host Disease after Hematopoietic Stem-Cell Transplantation)

  • 김윤미;윤희정;김현실;김기덕;정복영;방난심;박원서
    • Journal of Oral Medicine and Pain
    • /
    • 제37권3호
    • /
    • pp.147-154
    • /
    • 2012
  • 조혈줄기세포이식은 면역 결핍 질환, 자가 면역 질환, 악성 조혈 종양의 주된 치료법이다. 이종 조혈줄기세포이식의 주요한 합병증은 이식편대 숙주질환이다. 구강 점막 생검은 이식편대 숙주 질환의 확진과 치료계획 수립을 위해 필요하나 영양 결핍과 화학 요법으로 인해 전신상태가 불량한 환자에게 출혈과 균혈증을 일으킨다. 본 논문에서는 레이저를 이용한 최소 침습적 조직생검의 효능을 평가하였다. 모두 3개의 증례가 소개되었고 모든 환자의 의료 기록, 임상 사진, 조직병리학적 결과가 레이저를 이용한 조직생검의 효능을 평가하기 위해 검토되었다. 모든 환자는 생검 후 불편감이 없었고 심각한 합병증이 발생하지 않았다. 생검 조직의 질이 이식편대 숙주 질환을 확진하는 데에 적당했다. 구강 점막의 레이저를 이용한 최소 침습적 생검은 통상의 조직병리학적 생검에 비해 출혈을 일으키지 않아 감염과 균혈증, 술 후 흉터 생성을 줄이므로 이식편대 숙주 질환의 확진에 이로울 것이다.

구강악안면외과 의료행위 상대가치 개발에 대한 조사연구 (THE STUDY ON THE DEVELOPMENT OF RELATIVE VALUE IN MEDICAL TREATMENT OF THE ORAL AND MAXILLOFACIAL SURGERY)

  • 송진아;백경원;황종민;유순용;최진영
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제32권4호
    • /
    • pp.334-347
    • /
    • 2006
  • The aim of this study is to evaluate the reasonableness of the medical fee on oral and maxillofacial surgery field according to surgeon's opinions and actual conditions. The medical fee has significant influence on hospital income, the supply and distribution of medical manpower, quality and facilities of medical services. Questionnaire survey was sent to 86 oral and maxillofacial surgeons who worked more than 3 years in general hospital. Among them, 25 doctors replied the 109 answers survey and the average of treatment time and physician work relative value on each category was calculated. And the health insurance cost (that has been applied since 2003) was compared with the questionnaire results. And finally we investigated items that health insurance system did not include in oral and maxillofacial field but actually performed in oral and maxillofacial surgery clinic. The result was that the medical fee did not properly reflect physician work relative value of actual treatments. In case of complicated extraction, work relative value needed 3.5 times enhancement of present value. For simple impacted tooth extraction 1.8 times, for impacted tooth extraction including odontomy 1.7 times, and for fully impacted tooth more than 2/3 of it located into the alveolar bone, 1.8 times enhancement needed. In respect of the present physician work relative value, hemimandibulectomy with neck lymph node dissection for the malignancy is appropriated as 3.3 times of open reduction and internal fixation for the mandibular fracture, but the questionnaire result showed 25 times discrepancy. In conclusion, this research shows the need for intervention that health insurance included items and legal relative medical value must act in union with treatment in clinic to reduce the imbalance between them.

Genetic and phenotypic relationships of live body measurement traits and carcass traits in crossbred pigs of Korea

  • Do, Chang-Hee;Park, Chan-Hyuk;Wasana, Nidarshani;Choi, Jae-Gwan;Park, Su-Bong;Kim, Si-Dong;Cho, Gyu-Ho;Lee, Dong-Hee
    • 농업과학연구
    • /
    • 제41권3호
    • /
    • pp.229-236
    • /
    • 2014
  • This study presents the estimates of heritabilities of body measurement traits and carcass traits, and genetic and phenotypic correlations of those traits for crossbred pigs in Korea. Body and ultrasound (A mode: Piglog 105) measurements in 221 pigs including body weight, length, height and width, three back fat thickness at the points of 4th, 14th rib and chine bone, eye muscle area and lean meat percent were collected at the ages of 70, 145 and 180 days and then slaughtered to measure carcass weight, back fat, belly, collar butt, spare rib, picnic shoulder, hind leg, loin, tenderloin, lean meat yield and intramuscular rough fat content in loin. Genetic analysis was done using a multi-trait animal model. Heritabilties of the body measurements were ranged from 0.331 to 0.559 and three measurements of back fat thickness were also high as range varying from 0.402 to 0.475 for the ages of 145 and 180 days. However, eye muscle area was moderate (0.296) at the age of 180 days. Heritabilities of retail cut yields were also high as ranged from 0.387 to 0.474 and of IMF content in loin was 0.499. Heritabilities of the cut percent traits were ranged from 0.249 to 0.488. Important positive genetic and phenotypic correlations were noted for all carcass yield traits (0.298 to 0.875 and 0.432 to 0.922, respectively). IMF showed low negative genetic correlations with carcass yield traits, such as carcass weight, picnic shoulder, hind leg, loin, tenderloin and lean meat yield whereas low positive genetic correlations with back fat, belly, collar butt and spare rib. Loin, tenderloin and lean meat percent showed negative genetic correlations with carcass weight, back fat thickness, collar butt, spare rib and picnic shoulder percent. The four body measurements at the ages of 70, 145 and 180 days had positive genetic correlations with belly, shoulder butt, spare rib, picnic shoulder and hind leg percent, but negative genetic correlations were shown with loin and tenderloin percent except body measurements at 70 days. The results suggest that carcass yield are negatively correlated with intramuscular fat content, which is a major factor deciding pork quality and the yield of loin and tenderloin are not increased as much as increase in body size. However, the proportions of belly and collar butt are increased with the body size. In conclusion, selection strategy should be designed according to the preference on composition of carcass in each country.

CT Dicom 파일을 이용하여 제작한 3D Print 손목보호대용 Velcro band 고정위치의 유한요소해석(FEM) (Finite Element Analysis(fem) of The Fixed Position of the Velcro Band for the 3D Print Wrist Brace made using the Dicom File)

  • 최현우;서안나;이종민
    • 한국방사선학회논문지
    • /
    • 제15권5호
    • /
    • pp.585-590
    • /
    • 2021
  • 손목 보조기(Wrist brace)는 손목 외상 환자들에게 사용이 되고 있다. 최근 맞춤형 손목 보조기를 3D 프린팅 기술을 활용하여 제작하는 많은 연구가 진행되고 있다. 이러한 3D 프린팅 맞춤형 보조기는 개인마다 다른 형태 반영, 통기성 확보 등의 다양한 요소를 반영할 수 있는 장점이 있다. 본 논문에서는 3D 프린팅 맞춤형 손목 보조기 제작 시 고려되어야 하는 벨크로 밴드 숫자와 위치가 보조기에 미치는 스트레스를 분석하였다. 맞춤형 보조기를 위해 CT 영상 기반으로 자동설계 소프트웨어(Reconeasy 3D, Seeann Solution)를 사용하여 뼈, 피부 영역 3D 모델링을 수행하였다. 3D 피부 영역을 기반으로, 각 치료 목적에 맞도록 손목 보조기 디자인을 적용하였다. 그리고, 보조기의 탄성을 위해 TPU 소재를 사용하여 FDM 방식 3D 프린터로 손목 보조기를 제작하였다. 맞춤형 3D 프린팅 손목 보조기의 벨크로 밴드의 숫자와 위치에 따른 효용성 평가를 위해 보조기의 스트레스 분포를 유한요소법(FEM)으로 분석하였다. 본 연구에서 수행한 손목 보조기 유한요소 해석을 통해 보조기의 스트레스 분포를 확인하였고 보조기 제작과 벨크로 밴드의 숫자와 위치를 확인할 수 있었다. 이러한 실험 결과는 환자에게 양질의 치료를 제공하는데 도움이 될 것이다.

Growth performance, carcass traits and gut health of broiler chickens fed diets incorporated with single cell protein

  • Hombegowda, Gangavadi P.;Suresh, Bypanahalli N.;Shivakumar, Mysore C.;Ravikumar, Puttamallappa;Girish, Bekkere C.;Rudrappa, Satturu M.;Indresh, Huchamanadoddi C.
    • Animal Bioscience
    • /
    • 제34권12호
    • /
    • pp.1951-1962
    • /
    • 2021
  • Objective: This study was conducted to evaluate single cell protein (SCP), produced from Methylococcus species, as a protein source on the growth performance, carcass traits and gut health of broiler chickens. Methods: Ten iso-nitrogenous and iso-caloric diets containing 0 (Control), 2.5%, 5%, 7.5%, and 10% SCP replacing either soybean meal (T1 to T5) or fish meal (T6 to T10) were formulated. Each diet prepared for starter (0 to 14 days), grower (15 to 21 days), and finisher (22 to 42 days) phases was offered to four replicates of 10 chicks each (n = 400). Growth performance at different phases and carcass characteristics and intestinal morphology on 42nd day of trial were measured. Results: Body weight gain in groups fed 2.5% and 5% SCP diets were comparable to control during different phases and cumulatively, however lower (p<0.01) in 7.5% and 10% SCP diets. Feed conversion ratio was better (p<0.01) in 2.5% and 5% SCP diets. Dressing percentage, abdominal fat percentage and meat:bone ratio were not affected (p>0.05) by SCP inclusion in the diets. However, breast percentage was higher (p<0.01) in 2.5% and 5% SCP groups and thigh percentage higher in 7.5% and 10% SCP groups. Total microbial count in duodenum, jejunum and ileum were not affected (p>0.05) by SCP inclusion up to 10% in diets. Duodenal villi length and crypt depth were highest (p<0.01) in group fed 5% SCP diets and lowest in group fed 10% SCP diets. Jejunal villi length and crypt depth as well as ileal villi length were lowest (p<0.01) in group fed 10% SCP diets. Body weight gain, feed consumption, feed conversion ratio and gut health were better (p<0.01) in broilers fed fish meal based diets compared to soybean meal based diets. Conclusion: It was concluded that inclusion of SCP up to 5% replacing soybean meal in broiler diets is beneficial in improving growth rate, breast yield and gut health status.

경주 황남대총 출토 칠제품의 재질 및 기법조사 (A Study on Materials and Techniques of Lacquer Ware from Hwangnamdaechong in Gyeongju)

  • 岡田文男;이은석;임지영
    • 헤리티지:역사와 과학
    • /
    • 제42권3호
    • /
    • pp.176-191
    • /
    • 2009
  • 필자들은 경주지역 최대 고분인 황남대총 남, 북분에서 출토된 칠기의 재질과 기법 조사를 실시하였다. 조사 방법은 깨어진 칠기편을 이용하여 태골을 분류하고 그 결과를 바탕으로 도막단면(약2㎜)의 박편을 제작, 현미경하에서 하지의 혼입재 종류와 도막구조를 분류함으로써 칠기의 유래를 추정하였다. 그 결과를 정리하면 다음과 같다. 1. 남분에서 출토된 칠이배, 칠완, 칠장방형합자 등 협저제칠기의 하지에는 골분이 사용되었다. 이러한 칠기는 동시대 동아시아에 있어서 중국의 진~한대 이후 발달된 고급칠기의 계보에 위치된다. 2. 남, 북분에서 출토된 칠배, 완, 장방형합자 등은 식기류, 화장도구의 일부로서 세트로 부장되었을 가능성이 있다. 3. 남분과 북분 출토 칠기에는 품질면에서 차이가 있다. 남분에는 중국칠기의 계보를 잇는 협저제칠기, 포태칠기 등 고급품이 다수 부장되어 있다. 북분에는 남분에서 출토된 칠기보다 제작방법이 간단한 목심제칠기가 많다. 4. 북분에서 출토된 흑칠지에 동물이나 새 문양이 그려진 용기류는 대부분 목심제칠기로 제작 공정이 비교적 간단하다.

머신러닝을 이용한 시각장애인 도로 횡단 보조 임베디드 시스템 개발 (Development of Street Crossing Assistive Embedded System for the Visually-Impaired Using Machine Learning Algorithm)

  • 오선택;정기동;김호민;김영근
    • 한국HCI학회논문지
    • /
    • 제14권2호
    • /
    • pp.41-47
    • /
    • 2019
  • 본 연구는 시각장애인들이 도로를 안전하게 횡단할 수 있도록 신호등 인식 및 음성안내를 제공해주는 임베디드 시스템의 설계를 제안한다. 시각장애인에게 독립보행은 큰 어려움으로 작용하고 있으며, 독립보행의 제한은 그들의 삶의 질을 저하시키는 요인으로 작용하고 있다. 도로횡단에서의 신호등 인식과 도로 및 차로의 구분 불가는 시각장애인의 독립보행을 방해하는 가장 큰 요인 중 하나이다. 본 연구에서 제안하는 스마트기기는 안경에 달린 초소형 카메라로 GPU 보드에 탑재된 머신러닝 알고리즘을 이용하여 보행자 신호등을 검출 및 인식하며, 음성 안내를 유저에게 전달해준다. 휴대성을 위하여, 기기는 충분한 배터리 수명과 함께 소형 및 가볍게 디자인되었다. 또한, 안경 다리에는 외부 소리를 막지 않으면서 음성 안내를 전달해주는 골전도 스피커가 부착되어 있다. 본 연구에서 제안하는 스마트기기는 실험을 통하여 보행자 신호의 초록 신호에 대하여 87.0%의 검출율(recall)과 100%의 정확도(precision)를 가지며, 빨간 신호에 대하여, 94.4%의 검출율(recall) 값과 97.1%의 정확도(precision)를 가지는 것으로 유효성을 확인하였다.