• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.359-366
• /
• 2012

Today, people are exposed to the various noisy environments, such as in the buses, subway and supermarkets where there are a lot of people. The noise issue is getting more serious as people want to use portable sound equipment and mobile phones even under this noisy condition. People want to use the portable equipment to exchange the information freely and they set the volume as 15dB higher than the noise around them, which almost reach at 110 dB. That amount of sound can cause noise induced deafness to the users and another issue to the others as additional noise source. A Bone-conduction system can be a solution to reduce noise and enhance voice signal of mobile phone. In this paper, we propose the way of cancelling noise and enhancing speech signal of mobile phones, by installing bone-conduction feedback system with ordinary mobile phones. With this system, we can reduce the environment noise and enhance the voice quality of mobile phones. Using this method, we can enhance the signal by around 17 dB.

• Journal of Korean Dental Science
• /
• v.4 no.2
• /
• pp.52-58
• /
• 2011

Purpose: Modifications of implant design have been related to improving initial stability. The purpose of this study was to investigate their respective effect on initial stability between two tapered implant systems (self-tapping vs. non-self-tapping) in medium density bone using three different analytic methods. Materials and Methods: Self-tapping implant (GS III$^{(R)}$; Osstem Implant Co., Busan, Korea) and non-self-tapping implant (Replace Select$^{(R)}$; Nobel Biocare, G$\H{o}$teborg, Sweden) were investigated. In Solid rigid polyurethane blocks of artificially simulated Quality 2 bone, each of the 5 implants was inserted according to the manufacturer's instructions for medium-bone drilling protocol. Evaluation of initial stability was carried out by recording the maximum insertion torque (IT) and performing the resonance frequency analysis (RFA), and the pull-out test. Results: The IT and RFA values of self-tapping implant were significantly higher than those of non self-tapping implant (P=.009 and P=.047, respectively). In the pull-out values, no significant differences were found in implants between two groups (P=.117). Within each implant system, no statistically significant correlation was found among three different outcome variables. Conclusions: These findings suggest that design characteristics of implant geometry significantly influence the initial stability in medium bone density.

• Journal of Biosystems Engineering
• /
• v.36 no.4
• /
• pp.257-266
• /
• 2011

Consumption of chicken feet has been increasing recently, thus it was necessary to produce good quality of bone less chicken feet. In the process of bone removal during chicken feet production, feeding, conveying, cutting and bone removing process takes about 90% of overall labor. Therefore, the development of a chicken feet-bone remover was necessary to reduce the cost of labor. The main objective of this study was to make and test of chicken feet-bone remover. The optimum vibration level of feeder wes 8, and the optimum conveyor speed was 3.6 m/min. The feeding speed of feeder were 0.18 m/s, 0.13 m/s and 0.19 m/s for the weight ranges of chicken feet of >20 g, 20~30 g and 30 g< respectively. The sensing success rates of chicken feet were 100%, 98% and 96% for the conveyor speeds of 3.0, 3.6 and 4.2 m/min respectively. The slips of chicken feet were 1.0 mm, 1.9 mm and 3.2 mm for conveyor speed of 0.8, 1.9 and 4.2 m/min respectively, with the average moisture content of 65% (w.b). The incision accuracy rates of the chicken leg were 46%, 95%, 97% for the size ranges of >15 mm, 15~18 mm, 18 mm< respectively with the velocity of cutting blade 3.9 m/s. The removal rates of the chicken feet bone were 98%, 96%, 88% for toes diameter >10 mm, 10~15 mm, 15 mm> respectively with the velocity of cutting blade 11.8 m/s.

• Journal of Korean Neurosurgical Society
• /
• v.54 no.5
• /
• pp.384-389
• /
• 2013

Objective : Use of quantitative computed tomography (CT) to evaluate bone mineral density was suggested in the 1970s. Despite its reliability and accuracy, technical shortcomings restricted its usage, and dual-energy X-ray absorptiometry (DXA) became the gold standard evaluation method. Advances in CT technology have reduced its previous limitations, and CT evaluation of bone quality may now be applicable in clinical practice. The aim of this study was to determine if the Hounsfield unit (HU) values obtained from CT correlate with patient age and bone mineral density. Methods : A total of 128 female patients who underwent lumbar CT for back pain were enrolled in the study. Their mean age was 66.4 years. Among them, 70 patients also underwent DXA. The patients were stratified by decade of life, forming five age groups. Lumbar vertebrae L1-4 were analyzed. The HU value of each vertebra was determined by averaging three measurements of the vertebra's trabecular portion, as shown in consecutive axial CT images. The HU values were compared between age groups, and correlations of HU value with bone mineral density and T-scores were determined. Results : The HU values consistently decreased with increasing age with significant differences between age groups (p<0.001). There were significant positive correlations (p<0.001) of HU value with bone mineral density and T-score. Conclusion : The trabecular area HU value consistently decreases with age. Based on the strong positive correlation between HU value and bone mineral density, CT-based HU values might be useful in detecting bone mineral diseases, such as osteoporosis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.1
• /
• pp.20-30
• /
• 2016

Objectives: To validate a critical-size mandibular bone defect model in miniature pigs. Materials and Methods: Bilateral notch defects were produced in the mandible of dentally mature miniature pigs. The right mandibular defect remained untreated while the left defect received an autograft. Bone healing was evaluated by computed tomography (CT) at 4 and 16 weeks, and by micro-CT and non-decalcified histology at 16 weeks. Results: In both the untreated and autograft treated groups, mineralized tissue volume was reduced significantly at 4 weeks post-surgery, but was comparable to the pre-surgery levels after 16 weeks. After 16 weeks, CT analysis indicated that significantly greater bone was regenerated in the autograft treated defect than in the untreated defect (P=0.013). Regardless of the treatment, the cortical bone was superior to the defect remodeled over 16 weeks to compensate for the notch defect. Conclusion: The presence of considerable bone healing in both treated and untreated groups suggests that this model is inadequate as a critical-size defect. Despite healing and adaptation, the original bone geometry and quality of the pre-injured mandible was not obtained. On the other hand, this model is justified for evaluating accelerated healing and mitigating the bone remodeling response, which are both important considerations for dental implant restorations.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.116-126
• /
• 2009

The use of short implants has been accepted risky from biomechanical point of view. However, short implants appear to be a long term viable solution according to recent clinical reports. The purpose of this study was to investigate the effect of different diameter and length of implant size to the different type of bone on the load distribution pattern. Stress analysis was performed using 3-dimensional finite element analysis(3D-FEA). A three-dimensional linear elastic model was generated. All implants modeled were of the various diameter(${\phi}4.0$, 4.5, 5.0 and 6.0 mm) and varied in length, at 7.0, 8.5 and 10.0 mm. Each implant was modeled with a titanium abutment screw and abutment. The implants were seated in a supporting D2 and D4 bone structure consisting of cortical and cancellous bone. An amount of 100 N occlusal load of vertical and $30^{\circ}$ angle to axis of implant and to buccolingual plane were applied. As a result, the maximum equivalent stress of D2 and D4 bones has been concentrated upper region of cortical bone. As the width of implant is increased, the equivalent stress is decreased in cancellous bone and stress was more homogeneously distributed along the implants in all types of bone. The short implant of diameter 5.0mm, 6.0mm showed effective stress distribution in D2 and D4 bone. The oblique force of 100N generated more concentrated stress on the D2 cortical bone. Within the limitations of this study, the use of short implant may offer a predictable treatment method in the vertically restricted sites.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.3
• /
• pp.143-149
• /
• 2022

PURPOSE. Masticatory loading triggers active bone remodeling, altering alveolar bone mineral density (BMD). While dental implants are placed to bear masticatory loading, their influence on changing bone properties has not been fully investigated. Objective of this pilot study was to examine whether the dental implantation has an effect on BMD distribution of bone by comparing dentate, edentulous, and edentulous patients with implants. MATERIALS AND METHODS. Cone beam computed tomography (CBCT) images of 19 partially edentulous patients (Dent), 19 edentulous patients (Edent), and 16 edentulous patients who received implants in the mandible (Edent+Im), were obtained. CBCT images were also obtained from 5 patients within Edent+Im group, before implant placement and after implant loading. Basal cortical bone region of the mandible was digitally isolated. A histogram of gray levels proportional to BMD was obtained to assess mean, histogram standard deviation (HSD), fifth percentile of low and high values (Low₅ and High₅) of the BMD distribution. Multivariate analysis of variance and paired t-test were used to compare the BMD parameters among the 3 dental status groups and between pre- and post-implantation, respectively. RESULTS. Edentulous patients with implants had significantly greater HSD and High₅ values compared to edentulous patients (P < .013). All other comparisons were not significant (P > .097). Mean, HSD, and High₅ values significantly increased after receiving implants (P < .022). CONCLUSION. The current findings suggested that receiving dental implants promoted oral bone mineralization for edentulous patients. The longitudinal investigation could provide valuable information on understanding the effects of implantation on the behavior of oral bone quality.

• Archives of Craniofacial Surgery
• /
• v.23 no.5
• /
• pp.205-210
• /
• 2022

Background: Nasal bone fractures are the most common type of facial bone fracture, but are under-studied in adults above 65 years of age. Therefore, we investigated the epidemiology and patterns of nasal bone fractures among older adults in comparison to different age groups. Methods: This retrospective study included 2,321 nasal bone fracture patients who underwent surgery at our hospital from January 2010 to December 2017. The patients were classified by age as preschoolers, school-age children, young and middle-aged adults, and the elderly. We performed pairwise comparisons between elderly patients and each other age group in terms of sex, cause of injury, and fracture type. Results: The 2,321 nasal bone fracture patients included 76 elderly patients (50 men [65.8%] and 26 women [34.2%]). In these patients, the two most common injury causes were falling or slipping down (n= 39; 51.3%) and road traffic accidents (n= 19; 25.0%). According to the Stranc and Robertson classification, the most common force vector was lateral, and plane 2 fractures with lateral forces predominated. Conclusion: The elderly showed similar patterns of nasal bone fractures to those observed in young and middle-aged adults, but significant differences from preschoolers (in the injury vector and plane of fracture) and from school-age children (in the sex ratio and plane of fracture). However, elderly patients presented significantly different epidemiological characteristics compared to the other three groups. Therefore, it is necessary to improve the quality of life of the elderly and prepare for the upcoming super-aged society by taking steps to reduce the incidence and severity of fractures. Possible options for doing so include strengthening individual-level safety factors and expanding the social safety net for the elderly.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2009

In the present study, three types of teriyaki sauce were prepared using chicken bone and eel bone, which are commonly used as the primary ingredient of teriyaki sauce, as well as codfish bone, which has various functions. The and analyzed their quality characteristics of the different types of teriyaki sauce were then compared through physiochemical and sensory evaluation. The results of this study were as follows. The water content was lowest and the ash content was highest in teriyaki sauce that was prepared using chicken bone as the primary ingredient. In addition, the Ca, K, Mg, Na and P content were highest in the teriyaki sauce that was prepared using chicken bone as the primary ingredient. The total free amino acid content was highest in teriyaki sauce prepared using chicken bone, followed by sauces prepared using codfish bone and eel bone. The levels of free amino acids evaluated in this study occurred in the following order for all teriyaki sauces: glutamic acid > aspartic acid > leucine. When the sensory evaluation was conducted, teriyaki sauce prepared using chicken bone as the main ingredient was found to be best, followed by sauce prepared using codfish bone in terms of palatability and viscosity among descriptive scales, and smell and general preference among hedonic scales. The results of this study suggest that teriyaki sauce could be produced using codfish bone instead of chicken bone, which would enable production of a high value-added product through the use of a common byproduct. This would result in the efficient use of unused resources, prevention of environmental pollution and supply of an inexpensive that could be widely used in the food processing and food service industries.