• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.803-814
• /
• 2000

Current acceptable methods of promoting periodontal regeneration are basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, biological mediators. Platelet Rich Plasma have been reported as a biological mediator which regulate activities of wound healing progress including cell proliferation, migration, and metabolism. The purpose of this study is to evaluate the possibility of using the Platelet Rich Plasma as a regeneration promoting agent for furcation involvement defect. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on mandibular third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were PRP plus bovine bone and bovine bone only. After 4, 8 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. At 4 weeks after surgery, there were rapid osteogenesis phenomenon on the defected area of the Platelet Rich Plasma plus bovine bone group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 4 weeks after surgery. In conclusion, Platelet Rich Plasma can promote rapid osteogenesis during early stage of periodontal tissue regeneration.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.63-67
• /
• 2012

Purpose: Lipogranuloma is the reaction of adipose tissue to various oils, paraffin, and other hydrocarbons injected into subcutaneous tissue for cosmetic or other reasons. The authors experienced a case of sclerosing lipogranuloma on the nasal dorsum. Methods: A 42-year-old female, without a history of the injection of any foreign materials, was admitted on our hospital for a painless, irregular, and firm mass located on her nasal dorsum with step-off deformity. It was considered that the mass had developed after augmentation rhinoplasty. The size of mass had been increased after closed reduction of nasal bone fracture. On April 2011, under general anesthesia, the mass was removed by open rhinoplasty technique. In addition, a pathologic examination was performed. After the mass extirpation, dermofat graft was performed for the correction of depression deformity. Results: The histopathological findings demonstrated a Swiss cheese pattern with variably-sized vacuoles, which corresponded to lipid removed with tissue processing, and variable foreign body giant cell reaction, fat necrosis, and hyalinized fibrous tissue. The pathologic diagnosis is lipogranuloma replacing nasalis muscle. It has been considered that sclerosing lipogranuloma is caused by nerve injury during augmentation rhinoplasty and the ointment used after the closed reduction of nasal bone fracture, which infiltrated through the injured mucosa. Conclusion: During the treatment of rhinoplasty or nasal bone fracture, the nerve injury or the ointment use can lead to lipogranuloma. Therefore, careful dissection for avoidance of the nerve injury and limited use of ointment seems to be helpful in decreasing incidence of lipogranuloma.

• Journal of Periodontal and Implant Science
• /
• v.27 no.2
• /
• pp.379-394
• /
• 1997

Several methods have been used for regeneration of tissue lost by periodontal disease. Subepithelial connective tissue graft technique, one of the technniques of mucogingival surgery, is used for the regeneration in esthetic problems such as recession, and denuded root coverage. This study is performed to evaluate the healing process and the regeneration and reattachment of periodontal tissue, including the reconstruction of junctional epithelium, and connective tissue. Alveolar defects in five adult dogs were treated with periodontal surgery and were attained by removing the marginal alveolar bone by $4{\time}3mm$ from CEJ in the labial side of incisors, and root surfaces were planed. The experimental sites were divided into two groups as follows. 1. root planing alone(control group) 2. with connective tissue graft (Experimental Group) In the two groups flaps were positioned and sutured tightly, the healing processes were observed and were histologically compared with each other after 2days, 4days, 1week, 2weeks, 4weeks. The results were obtained as follows : 1. In the two groups blood clots were observed as early as 2 and 4 days, and were resorbed at 1 week. 2. In the two groups moderate inflammation was observed as early as 2 and 4 days, decreased at 1 and 2 weeks, and disappeared at 4 weeks. 3. Junctional Epithelium migration was more significant in the control group, and was restrained by graft materials in the experimental group. 4. Features of connective tissue fiber attachment partially showed the parallel pattern in the two groups from 2 weeks, and entirely from 4weeks. 5. Anastomosis, between graft and connective tissue, appeared from 4 days in the experimental group and the border between them was not discriminated at 4weeks.

• Journal of Periodontal and Implant Science
• /
• v.42 no.6
• /
• pp.204-211
• /
• 2012

Purpose: This study was performed to establish an experimental rabbit model for single-stage maxillary sinus augmentation with simultaneous implant placement. Methods: Twelve mature New Zealand white rabbits were used for the experiments. The rabbit maxillary sinuses were divided into 3 groups according to sinus augmentation materials: blood clot (BC), autogenous bone (AB), and bovine-derived hydroxyapatite (BHA). Small titanium implants were simultaneously placed in the animals during the sinus augmentation procedure. The rabbits were sacrificed 4 and 8 weeks after surgery and were observed histologically. Histomorphometric analyses using image analysis software were also performed to evaluate the parameters related to bone regeneration and implant-bone integration. Results: The BC group showed an evident collapse of the sinus membrane and limited new bone formation around the original sinus floor at 4 and 8 weeks. In the AB group, the sinus membrane was well retained above the implant apex, and new bone formation was significant at both examination periods. The BHA group also showed retention of the elevated sinus membrane above the screw apex and evident new bone formation at both points in time. The total area of the mineral component (TMA) in the area of interest and the bone-to-implant contact did not show any significant differences among all the groups. In the AB group, the TMA had significantly decreased from 4 to 8 weeks. Conclusions: Within the limits of this study, the rabbit sinus model showed satisfactory results in the comparison of different grafting conditions in single-stage sinus floor elevation with simultaneous implant placement. We found that the rabbit model was useful for maxillary sinus augmentation with simultaneous implant placement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.3
• /
• pp.241-249
• /
• 2007

An augmentation of the maxillary sinus floor facilitates placement of dental implants in the posterior atrophic maxilla. However, a maxillary sinus augmentation has potential complications that can lead to early failure and loss of the bone graft. One specific complication is sinus membrane perforation. Especially, large perforations may cause loss of the graft materials into the sinus and infection, so, early failure of the sinus lift. Attempts at managing sinus membrane perforations are difficult because of the limited access to them and friability of the thin Schneiderian membrane. Repair of sinus membrane perforations intraoperatively may be performed using a variety of techniques and materials, including sutures, collagen membranes, fibrin glue. Inspite of various repair technique, as has been reported extensively in the literature, large perforations represent an absolute contraindication to the continuation of surgery. But, we obtained clinically favorable results in cases that show repair of the perforated sinus membrane with a micro-suture technique by 4X Loupe ($Surgitel^{(R)}$ Loupe, General Scientific Corporation) in large perforation. The objective of this presentation is to report of several cases of repair of the perforated sinus membrane with micro-suture technique using 7.0 or 8.0 suture materials, to make a brief review of the literature about various technique managing perforated sinus membrane.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.75-82
• /
• 2008

Purpose: The purpose of this study was to evaluate exophytically vertical bone formation in the mandibular premolar area of beagle dogs by the concept of guided bone regeneration with a titanium reinforced e-PTFE membrane combined with human demineralized freeze-dried bone. Materials and Methods: Four one-year old beagle dogs were divided into control and experimental group. All mandibular premolars were extracted and surgical vertical defects of 5 mm in height were created in the extracted sockets. At 8 weeks after the extraction, TR e-PTFE membrane sized with 8 mm in length, 5 mm in width, and 4 mm in height was placed on the decorticated mandible, fixed with metal pins and covered with full-thickness flap and assigned as control group. In experimental group, decorticated mandibule was treated with TR e-PTFE membrane and human demineralized freeze-dried bone. The animals were sacrificed at 16 weeks after the regenerative surgery, and new bone formation was assessed by histomorphometric as well as statistical analysis. Results: Average of new bone formation was 38% in the control group, whereas was 25% in the experimental group (p<0.05). Average of connective tissue formation was 42% in the experimental group, whereas was 30% in the control group (p<0.05). The lamellar bone formation with haversian canals was observed in the both groups. In the experimental group, the particles of human demineralized freeze-dried bone were observed after 16 weeks and complete resorption of graft was not observed. Conclusion: On the basis of these findings, we conclude that titanium reinforced e-PTFE membrane may be used alone for vertical guided bone regeneration, but demineralized freeze-dried bone has no additional effect on vertical guided bone regeneration.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.278-288
• /
• 2014

Purpose: The aim of the study was to evaluate preprosthetic initial survival rate and factors associated with survival of osseointegrated implants placed in edentulous area of maxilla and mandible and to suspect the possible causes leading to failure. Materials and Methods: A total of 2158 endosseous implants that had been inserted between 2004 through 2013 were placed in 770 patients. The clinical comparisons were performed to evaluate implant loss in relation to age and gender of patients, position, system, length and diameter of implant, and bone graft technique. Results: According to position, the survival rates were 98.23% in maxillary anterior site, 96.98% in maxillary posterior site, 97.85% in mandibular anterior site and 98.76% in mandibular posterior site (P < 0.05). According to diameter of implant, the survival rates were 100% under 3.0 mm, 97.09% between 3.0 to 3.5 mm, 98.19% between 3.5 to 4.0 mm and 98.29% between 4.0 to 4.5 mm but relatively lower survival rate was 75% in 5.0 mm-over (P < 0.05). The survival rates of implants were 89.51%, 98.28%, 98.34% and 99.27% in the group with isolated sinus graft, with isolated GBR, with sinus graft and GBR simultaneously and without bone graft, especially (P < 0.05). Conclusion: This study establishes a relationship between survival rate of implant and position, diameter of implant system and bone graft technique. In conclusion, there were low survival rates in maxillary posterior site, in dental implants with wide diameter of 5 mm-over, and in the group with isolated sinus graft.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.1
• /
• pp.27-34
• /
• 2011

Purpose: To evaluate the short term clinical result of ACL reconstruction with autologous hamstring tendon using Cross pin and Graft Tensioner and to seek way to resolve the experienced technical problems. Materials and Methods: From January 2008 to March 2009, 35 patients who had been treated arthroscopic ACL reconstruction were enrolled. The femoral side of ACL graft was fixed with Cross pin. The tibial side of graft was fixed with Intrafix and post-tie. The graft was tensioned with Graft Tensioner at 80N. We analyzed the clinical, radiographic results and complications. Results: IKDC subjective score and Lysholm score improved to 89.1 and 91.4 points. Also, Pivot shift test and One-leg hop test showed good results postoperatively. Side to side difference using KT-1000 arthrometer and Telos stress radiography improved compared with normal limb to $2.8{\pm}1.6$ mm and $2.6{\pm}1.3$ mm, respectively. The femoral tunnel enlarged to $2.3{\pm}1.1$ mm. Soft tissue irritation and femoral tunnel-graft harness length mismatch, femoral tunnel-cross pin tunnel mismatch were happened as peri-operative complications. Conclusion: Using of Cross pin and Graft Tensioner for ACL reconstruction with hamstring tendon is one of the good method for obtaining stability in short-term clinical result. But to reduce femoral tunnel-cross pin mismatch, it needs to shorten femoral bone tunnel and to create cross pin tunnel as vertical as possible. And to reduce femoral tunnel-graft harness mismatch, it needs to advance position rod further 3 mm when to create femoral tunnel.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.326-332
• /
• 2013

PURPOSE. The purpose of this study was to compare stress distributions of implant-supported crown placed in fibula bone model with those in intact mandible model using three-dimensional finite element analysis. MATERIALS AND METHODS. Two three-dimensional finite element models were created to analyze biomechanical behaviors of implant-supported crowns placed in intact mandible and fibula model. The finite element models were generated from patient's computed tomography data. The model for grafted fibula was composed of fibula block, dental implant system, and implant-supported crown. In the mandible model, same components with identical geometries with the fibula model were used except that the mandible replaced the fibula. Vertical and oblique loadings were applied on the crowns. The highest von Mises stresses were investigated and stress distributions of the two models were analyzed. RESULTS. Overall stress distributions in the two models were similar. The highest von Mises stress values were higher in the mandible model than in the fibula model. In the individual prosthodontic components there was no prominent difference between models. The stress concentrations occurred in cortical bones in both models and the effect of bicortical anchorage could be found in the fibula model. CONCLUSION. Using finite element analysis it was shown that the implant-supported crown placed in free fibula graft might function successfully in terms of biomechanical behavior.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.101-106
• /
• 2004

Purpose: To determine the efficacy of the SDBBA (Subtalar distraction bone block arthrodesis) procedure on patients with late complication of intra-articular calcaneal fractures including subtalar joint arthritis and anterior ankle impingement syndrome. Materials and Methods: Five cases in which the SDBBA procedure was implemented were followed for more than one year. All five patients were male with an average age of 56. Clinically, the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and the pain score were assessed. Radiographically, the talocalcaneal height and the talar inclination angle were determined. Results: All five patients achieved subtalar joint fusion. The average pre-operative AOFAS score was 22.8 scores (range, 8-32 scores). At last follow-up, these scores improved to an average of 72.4 scores (range, 64-82 scores). The average pre-operative pain score was 8.2 scores (range, 7-10 scores). At last follow-up, these scores improved to an average of 13.2 (range, 12-15 scores). The average pre-operative talocalcaneal height was 72.8 mm (range, 70-77 mm), average post-operative talocalcaneal height improved to 79.8 mm (range, 78-84 mm). At final follow-up, these measurement was slightly decreased to average 78.6 mm (range, 74-83 mm). The average pre-operative talar inclination angle was 13.2 degrees (range, 12-15 degrees), average post-operative talar inclination angle improvedto 19.2 degrees (range, 15-24 degrees). At final follow-up, these measurement was slightly decreased to average 18.6 degrees (range, 12-24 degrees). Four patients achieved successful outcomes. One patient developed a wound infection with subsequent sural neuropathy as well as collapse of the bone graft. Conclusion: This study shows that the SDBBA procedure successfully restores the talocalcaneal height and tibio-talar relationship. This procedure is useful in surgically managed patients with talo-calcaneal height loss and anterior ankle impingement syndrome due to the late complications of calcaneal intra-articular fractures.