• Archives of Plastic Surgery
• /
• 제36권1호
• /
• pp.46-50
• /
• 2009

Purpose: Finger injury by green onion cutting machine is one of the common hand injuries in the kitchen. It has a unique feature: there are multiple parellel laceration 3 - 5 mm wide. There are two directions of injuries(vertical, oblique). It may involve bone, tendon, nerve, and vessel injuries. We discuss its management and the long - term progress. Methods: We have treated six patients from 2003 to 2007. We carried out low tension approximation with thin suture materials to avoid ischemia and performed the additional operation as nail bed repair, tenorrhaphy, open reduction, vessel anastomosis, and composite graft. We reviewed the record of initial injury and collected the follow - up record. Results: They were all middle aged - women who had worked in the kitchen. Right hand was dominent over left hand. The ratio of the directions was 3 : 3 (vertical : oblique). They were all competely healed although there were three atrophy, four hyperesthesia, and one nail deformity. Conclusion: Finger injury by green onion cutting machine is a unique pattern of laceration with various accompanied injuries. It may look like a severe form of injury, but in most cases have relatively favorable progress. We have to perform careful examination of accompanied injuries and carry out the proper management. First and foremost, the user especially in the middle aged women should be warned to be careful in handling this risky machine.

• Archives of Plastic Surgery
• /
• 제40권3호
• /
• pp.232-237
• /
• 2013

Background Polydactyly of the foot is one of the most frequent anomalies of the limbs. However, most classification systems are based solely on morphology and tend to be inaccurate and less relevant to surgical methods and results. The purpose of this study is to present our new classification of polydactyly of the foot, which can serve as a predictor of treatment and prognosis. Methods To find a correlation between the various morphologic traits of polydactyly of the foot and the treatment plan and outcomes, we reviewed 532 cases of polydactyly of the foot in 431 patients treated in our hospital, expanding on our previous study that described polydactyly based on the importance of metatarsal bone status and varus deformity. The records of patients were evaluated and compared with previous studies at other centers. Results Unsatisfactory results were seen in 36 cases, which included 5 cases of incomplete separation due to syndactylism, 23 cases of axis deviation, and 8 cases of remnants of extradigit metatarsal bones. The locus of the polydactyly, or the digit which was involved, did not seem to affect the final postoperative outcomes in our study. Three factors-syndactylism, axis deviation, and metatarsal extension-are the major factors related to treatment strategy and prognosis. Therefore, we developed a new classification system using three characters (S, A, M) followed by three groups (0, 1, 2), to describe the complexity of polydactyly of the foot, such as $S_1A_2M_2$. Conclusions Our new classification could provide a communicable description to help determine the surgical plan and predict outcomes.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.546-552
• /
• 2013

Background The zygoma is a major portion of the midfacial contour. When deformity occurs in this area, a reduction should be conducted to correct it. If a sagittal fracture at the temporal root of the zygomatic arch occurs, this also requires reduction, but it is difficult to approach due to its anatomical location, and the possibility of fixation is also limited. Thus, the authors attempted the reduction of sagittal fracture by two- or three-point fixation and the Gillies approach without direct manipulation. The preoperative and postoperative results of the patients were evaluated. Follow-up was performed to establish a treatment guideline. Methods A retrospective study was done with 40 patients who had sagittal fractures at the temporal root of the zygomatic arch from March 2009 to June 2012. Only two- or three-point fixation was performed for the accompanying zygomatic-orbital-maxillary fracture. The Gillies approach was used for complex fractures of the zygomatic arch, while the temporal root of the zygomatic arch was only observed without reduction. Preoperative and postoperative computed tomography and X-ray scans were performed to examine the results. Results The result of the paired t-test on preoperative and postoperative bone gap differences, the depression level, and the degree of temporal protrusion showed a marked decrease in the mean difference at a 95% confidence interval. The results were acceptable. Conclusions In the treatment of sagittal fractures at the temporal root of the zygomatic arch, it is acceptable to use indirect reduction and non-fixation methods. This leads to a satisfactory aesthetic and functional outcome.

• Clinics in Shoulder and Elbow
• /
• 제17권1호
• /
• pp.10-17
• /
• 2014

Background: The aim of this study was to assess the clinical outcomes after treatment of proximal humeral fractures with locking plates, and to determine which factors influence the clinical and radiological outcomes. Methods: Fifty six patients who were treated with locking plates for proximal humeral fractures and had been followed for more than 1 year were enrolled in this study. We performed functional evaluation using the Constant score and analyzed radiographic results. The following factors that may potentially influence the clinical outcomes were assessed: age, gender, type of fracture, presence of medial metaphyseal comminution, bone mineral density, anatomical reduction, restoration of medial mechanical support, and postoperative complications. Results: The mean Constant score was 70.1 points at the final follow-up. Female gender, 4-part fractures, AO type-C fractures, and fractures with medial metaphyseal comminution were associated with a poor clinical outcome. On the other hand, restoration of medial mechanical support and accurate anatomical reduction had a positive influence on clinical outcomes. Postoperative complications resulted in 3 patients (intra-articular screw perforation: 1 patient, varus deformity with screw loosening: 1 patient, nonunion: 1 patient). Conclusions: When treating proximal humeral fractures with locking plate fixation, following factors: a female gender, Neer type 4-part fracture, AO type C fracture, and medial metaphyseal comminution are important risk factors that surgeons should take into consideration. Factors that contribute to better clinical outcomes of operative treatment for humeral fractures are accurate anatomical reduction and restoration of medial mechanical support.

• 대한족부족관절학회지
• /
• 제7권2호
• /
• pp.151-156
• /
• 2003

Purpose: Proximal crescentic metatarsal osteotomy(PMO) is one of the most common procedures for correcting moderate to severe degree hallux valgus deformity. Although screw fixation is used for osteotomy site stability, loss of reduction can occur. The purpose of this study is to compare the sagittal plane stability of the conventional crescentic PMO fixed with a single screw with that of the crescentic PMO fixed with 1 screw and 2 supplemental K -wires. Material and Methods: Ten matched pairs of cadaveric foot specimens were used for the proximal crescentic metatarsal osteotomy. For one foot specimen of each pair, crescentic osteotomy was fixed with 4mm long threaded cannulated screw, while the matched pair was prepared by adding two axial 1.6mm K-wires to the conventionally fixed 4mm screw. The extensometer was used to measure the osteotomy gap as the metatarsal head was loaded continuously until failure using a servohydraulic MTS Mini Bionix test frame. The strength of fixation was normalized with the bone mineral density (BMD) of the paired specimen $(N{\times}cm^{2}/gm)$, Result: The average strength of the crescentic PMO with axial K-wire fixation ($458.8cm^{2}/gm$, S.D. 434.3) was significantly higher than the standard crescentic PMO ($367.5cm^{2}/gm$, S.D. 397,9) (p=0.05). Conclusion: Supplemental fixation with two axial K-wires can be added to the crescentic PMO to enhance the initial fixation stability to prevent the loss of reduction or dorsal malunion.

• 대한족부족관절학회지
• /
• 제24권3호
• /
• pp.107-112
• /
• 2020

Purpose: Hallux valgus (HV) is a common foot deformity that causes pain in the first metatarsophalangeal joint. Distal metatarsal osteotomies are commonly performed as a treatment. This retrospective study compared the clinical and radiological results of bioabsorbable magnesium (Mg) versus titanium (Ti) screw fixation for modified distal chevron osteotomy in HV. Materials and Methods: Forty-nine patients, who underwent modified distal chevron osteotomy for HV in 2018 and 2019, were reviewed retrospectively. Bioabsorbable Mg screw fixation was applied in 20 patients (22 feet), and a traditional Ti compression screw was applied in 29 patients (40 feet). The patients were followed up for at least six months. The clinical results were evaluated using the American Orthopaedic Foot and Ankle Society hallux metatarsophalangeal-interphalangeal (AOFAS-MTP-IP) scale and a visual analogue scale (VAS). The hallux valgus angle (HVA), intermetatarsal angle (IMA), and distal metatarsal articular angle (DMAA) were measured before, after surgery, and at the six months follow-up. Results: The AOFAS-MTP-IP scale and VAS points were improved in both groups, with no significant difference between them. At the six-month follow-up, HVA, IMA, and DMAA were similar. Bone union was confirmed in both groups, and there were no significant major complications in both groups. Four people in the Ti screw group underwent implant removal surgery. Conclusion: Bioabsorbable Mg screws showed comparable clinical, radiologic results to Ti standard screws six months after distal modified chevron osteotomy. These screws are an alternative fixation material that can be used safely and avoid the need for implant removal operations.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.407-413
• /
• 1999

구강악안면부위의 선천성 기형은 복잡한 발생학적 과정과 연관이 있으며 비정상적인 기형을 적절한 시기에 치료하지 못할 경우 이로 인한 이차적인 기형을 유발하여 치료를 더욱 어렵게 할 수 있다. 저자 등은 우측 상악돌기 후외하방에 중복 발생된 상악돌기와 과잉치로 인하여 저작장애를 보이며, 안와, 관골 및 상하악골의 심한 안모 비대칭 소견을 보이는 악안면기형환자를 골절제와 발치, 교정치료, 관골과 안와재건술, 악교정수술 및 반흔교정술 등의 4회에 걸친 수술을 통해 심미적, 기능적으로 만족스러운 결과를 얻었다. 악안면영역의 선천성 기형의 치료는 매우 난이하며 수차례의 수술을 요하고 수술 결과가 만족스럽지 못한 경우가 많으므로 사전 철저한 분석이 요구되며, 환자의 심리적 부담을 덜어주기 위한 특별한 배려가 요구된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권4호
• /
• pp.386-394
• /
• 2008

하악골에서 고분화 골육종은 매우 드물게 보고되고 있으며 조직검사상 전형적인 골육종과는 달리 다형성(pleomorphism)을 보이지 않기 때문에 양성종양으로 오진(under-diagnosis) 되기 쉽다. 그러나 정확한 환자의 진단은 적절한 치료와 환자의 예후에 영향을 큰 영향을 미친다. 그러므로 조기에 정확한 진단을 위하여는 의심되는 여러 부위에서 조직검사를 시행하고 임상소견과 방사선소견 등을 병리의사와 공유하여야 한다. 이에 초기에 진단이 어려웠던 하악골에 발생된 고분화 골육종을 경험하여 환자의 사회적 기능적 회복을 위한 수술을 시행하여 바람직한 결과를 얻었기에 문헌고찰과 함께 보고하는 바이다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권4호
• /
• pp.485-489
• /
• 2008

Basal cell nevus syndrome is a hereditary disease of an autosomal dominant trait with variable conditions such as basal cell carcinomas of the skin, deformity of rib, fusion of vertebrae, mental retardation, hypertelorism, and multiple odontogenic keratocysts. A 32 years old man with pus discharge from fistula on the vestibule of left upper 1st molar visited to Chosun University Dental Hospital. Radiographic evaluation revealed multiple maxillary and mandibular cysts that had multilocular radiolucency on left mandibular body area, thining of inferior border of left border of ramus and well defined unilocular radiolucency above right upper 1st and 2nd molar and from left upper 1st premolar to 2nd molar. In chest PA view, he had a forked rib in the left 4th rib and in skull PA view the calcification of falx cerebri was observed. There was not any skin lesion. After the preliminary evaluation, the patient was diagnosed with basal cell nevus syndrome and he underwent marsupialization for decreasing the size of cystic lesion and came to hospital for dressing 3days a week. As time goes by, the size of lesion decreased. So, one and half year after marsupialization, he underwent cyst enucleation and iliac bone graft for the mandibular lesion and buccal fat pad grafts for the maxillary lesions. After the surgery, the patient experienced normal healing without any complications and he is on long-term follow-up.

• 한국임상수의학회지
• /
• 제37권4호
• /
• pp.175-179
• /
• 2020

The objective of this study was to determine the effect of osteotomy angle and tibial proximal segment rotation angle on angular and torsional tibial deformities and to assess the trends of these deformities during the rotation of the tibial proximal segment in a center of rotation of angulation (CORA)-based leveling osteotomy (CBLO) by performing computer modeling of the tibia. Four tibias of toy breed dogs with no history of lameness were used in this study. Osteotomies were performed in the proximal tibias at angles of 0°, 10°, 20°, -10°, and -20°, perpendicular to either the proximodistal or craniocaudal tibial axes. The mechanical medial proximal tibial angle (mMPTA) and transcondylar (TC) and distal cranial tibial (CnT) axes were used to measure angular and torsional deformities, respectively. All tibias showed an increase in angular and rotational deformities with an increase in the tibial plateau rotation angle. The tibia with osteotomies performed in the proximodistal and craniocaudal directions showed the highest magnitude of torsional and angular deformities, respectively. The results of this study revealed a tendency of occurrence of angular and torsional deformities with osteotomy performed along the proximodistal and craniocaudal directions in the CBLO.