• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.24-30
• /
• 1996

In order to investigate the light fastness of amino azo disperse dyes, some kinds of disperse dyes were prepared and dyed to polyester fabric under the different conditions, such as single or mixture state. After the dyed fabric was irradiated with carbon arc light for several hours, the color differences and K/S values of fabric were measured. The light fastness of amino azo disperse dye was decreased by the introduction of OH group to the dye molecule. But when the amino azo dye was mixed with the anthraquinone disperse dye, the light fastness was increased. It was considered that the dye molecules were aggregated on account of hydrogen bonding via OH groups, resulting the decrease of surface area of dye molecule which might be irradiated by the light.

• Journal of Korea Foundry Society
• /
• v.12 no.6
• /
• pp.471-479
• /
• 1992

For the last 2 decades, the bonding materials for the foundry sand and the foundry equipments with high performance have been developed and employed in the foundry shops. In those periods, the furan resins hardened in higher temperature have been replaced with the self-hardened ones in the room temperature. Simultaneously the various reclamation methods of the self-hardened furan resin sand have been developed in order to get the clean working environments, the reduction of solid wastes and the lower of production cost in the foundry. In this experimental study, the combustion reclamation method using the fluidized bed among the various methods was studied in order to reduce the L.O.I. and /or $N_2$ gas due to the deposition of the furan resins and the hardeners. Comparing the results of this experimental combustion reclamation method with those of the employed pneumatic method, the Surface Stability Index of the specimen made by combustion method is 30% higher than that of the latter one and L.O.I. decreases about 30%. The reclamation temperature of 650$^{\circ}C$ in this experimental fluidized bed would be recommended in the viewpoints of the reclamation period, the fuel consumption and the residual quantity of the furan resin. The formula determining the minimum fluidizing velocities according to the temperatures in the fluidized bed has been obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.456-459
• /
• 2000

Thin films of vanadium oxide(V$O_x$) have been deposited by r.f. magnetron sputtering from $V_2$$O_5$ prget in gas mixture of argon and oxygen. Crystal structure, surface morphology, chemical composition and bonding properties of films in-situ annealed in $O_2$ ambient with various heat-treatment conditions are characterized through XRD, SEM, AES, RBS and FTIR measurements. The filrns annealed below 200 $^{\circ}C$are amorphous, and those annealed above 30$0^{\circ}C$ are polycrystalline. The growth of grains and the transition of vanadium oxide into the higher oxide have been obsenred with increasing the annealing temperature and time. The increase of O/V ratio with increasing the annealing temperature and time is attributed to the diffusion of oxygen and the partial filling of oxygen vacancies. It is observed that the oxygen atoms located on the V-0 plane of $V_2$$O_5$ layer participate more readily in the oxidation process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.44-54
• /
• 2013

Replacing OMG (old magazine) to ONP (old newspaper) by raising optical property through $CaCO_3$ in-situ precipitation method in white duplex board presents cost reduction and possible drying energy saving. The strength property impairment by the presence of $CaCO_3$ could be supplemented by the fiber furnish treatment or strength polymer addition. In $CaCO_3$ in-situ precipitation of ONP, it was found from morphological study using FlowCAM, an image analyzer, that most of calcium carbonate were formed on the fines, and made the size of the fines larger. For the case of forming calcium carbonate only on the fractionated fines, the size of the fines were the biggest, and there were more clean surface areas available for bonding for the fractionated long fibers when fractionated fibers and fines were regrouped to make paper.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.367-367
• /
• 2010

The adsorption configurations of S-proline on Ge(100) were studied using scanning tunneling microscopy (STM), density functional theory (DFT) calculations, and high-resolution core-level photoemission spectroscopy (HRCLPES). We identified three adsorption structures of S-proline on Ge(100) through analysis of the STM images, DFT calculations, and HRCLPES results: (i) an 'intrarow O - H dissociated and N dative bonded structure', (ii) an 'O - H dissociation structure', and (iii) an 'N dative bonded structure'. Moreover, because adsorption through the N atom of S-proline produces a new chiral center due to symmetry reduction by N dative bonding, the adsorption configurations have either (R,S) or (S,S) chirality, yielding an (R,S)-'intrarow O - H dissociated and N dative bonded structure' and an (R,S)-'N dative bonded structure', with a preference for reaction at the Re face. This work presents a novel method for generating stereoselective attachment using S-proline molecules adsorbed onto a Ge(100) surface.

• Korean Journal of Materials Research
• /
• v.6 no.4
• /
• pp.379-387
• /
• 1996

본 연구에서는 GaAs 소자제작 및 epi-layer 성장 공정에 있어 이용되어지는 HCI, H3PO4, 탈이온수(de-ionized water:DIW)를 통한 습식제정후 공기중 노출에 따른 오염을 최소화하여 표면상태 변화를 진성적(intrinsic)으로 관찰하고자 모든 세정처리를 아르곤 가스(argon gas)로 분위기가 유지되는 glove box에서 수행하였으며, 표면조성 및 결합상태 변화에 대한 관찰은 X-선 광전자 분광기(X-ray photoelectron spectroscopy)를 통해 이루어졌다. 고진공하에서 GaAs를 벽개하여 관찰함으로써 Ga이 대기중 산소이온과 우선적으로 결합함을 알 수 있었고, 이런 GaAs 표면의 반응성에 대한 고찰을 바탕으로 습식세정에 따른 화학반응 기구가 제시 되어졌다. HCI 및 H3PO4/DIW/HCI처리후 CI-이온의 Ga 이온과의 반응에 의한 Ga-CI결합의 형성과 As 산화물의 높은 용해도에 따른 As 산화물의 완전한 제거 및 식각전 초기(bare)GaAsvyaus에 존재하는 원소(elemental)As 상태의 식각후 잔류가 관찰되어졌다. 또 HCI, H3PO4/DIW/HCI 처리하고 DIW로 세척후 표면상태 변화를 관찰한 결과, DIW처리에 의해 elemental As 상태가 증가함을 알 수 있었다.

• Korean Journal of Materials Research
• /
• v.12 no.7
• /
• pp.545-549
• /
• 2002

Potassium-Calcium-Phosphate glasses in range $XCaO\cdot(50-X)K_2O$ \cdot $50P_2$$O^{5}$were investigated. Glass transition temperature(Tg) of prepared glasses were below $520^{\circ}C$, thermal expansion coefficient from $270.3$\times$10^{7}$ to $604.5$\times$10^{7}$/$^{\circ}C$. The structure of XCaO.(50-X)$K_2$O\cdot$50P_2$$O^{5}$ glasses were examined by FT-IR spectroscopy indirectly. As CaO was increased, Ts, Tg, P-O-P bonding strength and chemical durability were increased. Glass surface change was observed with increasing dissolution time using bulk specimen, weight loss and pH change were measured as function of the dissolution time.

• Conservation Science in Museum
• /
• v.14
• /
• pp.115-124
• /
• 2013

Disassembly and restoration work of Janghang-ri Stone Standing Buddha in the outdoor exhibition hall of Gyeongju National Museum were conducted for safe management of the collection due to problems like weathering of bonding materials by the outer environment, fixation of pollutants on the surface, and cracks by unidirectional load of rocks. A drawing was made through three-dimensional precise actual measurement, basic material research was conducted, and cement mortar and resin of the weathered part were removed. The restored part was bonded and restored by new stones using the same kind of rock. In addition, in order to prevent damages from microorganisms, fumigation treatment was made. It is under continuous observation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.458-461
• /
• 2004

In order to improve the adhesion properties of copper, MPS(3-mercaptopropyltrimethoxysilane) organic film were employed. The plasma pretreatment in pure He or $He/O_{2}$ mixed gas environment greatly increased adhesion force. Adhesion force was measured by scratch test with nano indenter. Microstructures and surface roughness were observed with scanning electron microscope(SEM). The characteristics of MPS layer for pretreatment were studied with flourier transform infrared spectroscope(FT-IR) and contact angle tester. The heighest adhesion was achieved in the specimen pretreated with mixed plasma and NPS coating, which was 56mN. Other specimen showed lower value by $20{\%}$ to $30{\%}$. The roughness of substrate was not affected by the bonding strength of copper plating.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.1
• /
• pp.10-17
• /
• 1980

Penicillin amidohydrolase was partially purified from the fermented broth of Bacillus megaterium, and was immobilized on nylon fiber. The surface area of nylon fiber was increased by roughening it with fine sand and activated by acid treatment. The free amino groups on the nylon fiber exposed by such treatment were then utilized to immobilize the penicillin amidase. Enzymatic properties of penicillin amidohydrolase immobilized on the nylon fiber by covalent bonding and cross linking with glutaraldehyde were studied and compared with those of soluble enzyme. The optimal pH and temperature profile of immobilized enzyme showed only slightly broader peaks, and the values of kinetic constants, $K_m$, $K_{ia}$, and $K_{ip}$, of the immobilized enzyme are only slightly greater than those of the soluble enzyme. These results suggest that the mass transfer effect on the reaction rate for the penicillin amidase immobilized on nylon fiber is not so significant as the enzyme immobilized on some other support material like bentonite. The experimental results of batch reaction agreed well with the results of computer simulation for both the immobilized and soluble enzyme systems, confirming the validity of the rate equation derived which was based on the combined double inhibition by two reaction products.