• Geomechanics and Engineering
• /
• 제32권4호
• /
• pp.361-373
• /
• 2023

This study aimed to investigate the engineering properties and mechanical behaviors of polymer-fibers treated sand. Para rubber (PR), natural fiber (NF), and geosynthetic fiber (GF) were used to reinforce poorly graded sand. A series of unconfined compressive and splitting tensile strength tests were performed to analyze the engineering behaviors and strength enhancement mechanism. The experiment results indicated that the PR-fibers mixture could firmly enhance the strength properties of sand. The stress-strain characteristics and failure patterns have been changed due to the increase of PR and fibers content. The presence of PR and fibers strengthened the sand and enhanced the stiffness and ductility behavior of the mixture. The stiffness of reinforced sand reaches an optimum state when both NF and GF are 0.5%, while the optimum PR contents are 20% and 22.5% for the mixture with NF and GF, respectively. An addition of PR and fiber into sand contributed to increasing interlocking zone and bonding of PR-sand interfacial.

• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.529-543
• /
• 2024

The bonding efficacy of steel I-section embedded in metakaolin-fly ash-based geopolymer concrete (MK-FA-GC) was investigated in this study. Push-out tests were conducted on nine column specimens to evaluate the influence of compressive strength of concrete, embedded length of steel I-section, thickness of concrete cover, and stirrup ratio on the bond performance. Failure patterns, load-slip relationships, bond strength, and distribution of bond stress among the specimens were analyzed. The characteristic bond strength of geopolymer concrete (GC) increased with higher compressive strength, longer embedded steel section length, thicker concrete cover, and larger stirrup ratio. Empirical formulas for bond strength at the loading end were derived based on experimental data and a bond-slip constructive model for steel-reinforced MK-FA-GC was proposed. The calculated bond-slip curves showed good agreement with experimental results. Furthermore, numerical simulations using ABAQUS software were performed on column specimens by incorporating the suggested bond-slip relationship into connector elements to simulate the interface behavior between MK-FA-GC and the steel section. The simulation results showed a good correlation with the experimental findings.

• Child Health Nursing Research
• /
• 제4권1호
• /
• pp.60-75
• /
• 1998

The parents have much expectation upon the pregnancy and child birth, and in most cases, they expect the healthy parturient child. However, we can be placed on the high-risk conditions which have the physical, social and immature infant, due to the unexpected results, among the new-born. Accordingly, these high-risk newborn and premature infants will be mostly in NICU, which the concentrated medical treatment can be given, upon their conditions. After their birth and during these periods, they will be divided from the parents, and the nurse will accomplish the bringing-up activities which they can take care of the infant, expected by the parents after their birth. The hospitalization of high-risk newborn including these premature infants is the shocking experience to the parents of family, and thus they can feel the fear and uneasiness, and these reactions of parents are troubled in the behavior at the usual days, and cause the disorder and spiritless status, and these results break the supporting ability of parents, and cause the obstruction. Also, the unavoidable division between the parents and the children as like hospitalization of children can make the parents to feel the alienation emotionally, and this causes the results which the pride on the bringing-up ability of baby gets to be lost. These problems can cause the difficulties on the bonding or the parenting in the further days, and can be related to the neglect and abuse of children. Also, it is gradually increased to study and report which the emotional division by the physical division between the mother and the baby obstructs the normal affection course between the parent and the infant. The stress caused by the birth and the hospitalization of high-risk newborn, as like this, is important in the points which it can uncertainly affect the potential energy for the relationship of parent-child who are finally healthy. Accordingly, the significance and purpose of this study are to understand the contents and degree of stress which the parents of high-risk newborn including the immature child can be experienced from the hospitalization of ICU for their new borns, and thus to offer the basic program to the nursing intervention program for these. The subject of this study is the mother of newborn in NICU of 10 General Hospitals located at the 3one of Pusan, Korea from September 1997 to October 1997, and thus makes the subject of 95 person of parents who agreed to take part in the study and it is descriptive study related to the stress of mother having the newborn in NICU. The method is based on the preceding study related to the stress of mother having the experience of child hospitalization and chronic disease child, and then acquires the advice of specialists group as like 5 nursing professors, and then is amended and supplemented. Total number of questions is 43 items and consists of 5 factors as like medical treatment &nursing procedures, disease status & prognosis, role of parents, communication & inter-personal relationships, hospital environment, and is 5 point Likert Scale. The reliability of this study method is very highly shown to be Cronbach α=0.95. The collected data is analysed as Average, Frequency, Standard Deviation, T-test, ANOVA, Pearson Correlation Coefficient, Duncan multifulrange test by use of SPSS /PC (V7.5). The results of this study is summarized as under. 1. Every characteristics of subject is which the party of mother is 28.70age(±7.48) in the average ages, 51% in the high-school graduate, 38.5% in the christianity, total monthly income is 212.55 thousand won(±1.971), 74.5% in the housewife, 72.9% in the parents and children together living and the number of children to be 1.48person(± 0.6) in average, the recognition on the prognosis of baby is 74.0% in 'Don't know', the relationship with the husband after the hospitalization of babyis 37.3% in 'More Intimate', the relationship with the family of husband to be 48% in 'No-change', and the degree which is consulted with the husband about the baby is 55% in 'very frequently' and the visiting number per week is 4.59(±1.63) in average and the accompanying person in the time of visiting is which the number of husband is 56.3% and thus is the highest. The characteristics of baby is which the age is 21.88days(±16.47) after the birth in average, the sex to be 50 person in the female 52.1% and the order of birth to be 54.2% in the first chid, and the weight in the birth to be 2770gm(±610) and the height in the birth to be 46.26cm(±7.62) in aver age. The medical diagnosis is 37.5% in the premature infant, the career of hospitalization is 96.9% in 'None', and the operation plan is 90.6% in 'None' and the execution of operation is 88% in 'None' and the nursing of incubator is 55.2% in 'Yes', and the method of feeding is 50.5% in 'Oral' and the contents of feeding is 46.9% in the 'Milk'. 2. The total stress degree of subject is almost highly shown to be as 3.36(±0.86). If it is compared upon each cause, 'stress on disease status & prognosis' is highest 3.79(±1.28), and it is in the order of 'stress on medical treatment & nursing procedures' 3.70(±0.93), 'stress on hospital environment' 3.14(±0.86), 'stress on role of parents' 3.18(±0.92) and 'stress on communication & inter personal relationship' 2.62(± 0.77) 3. As the results of checking the notworthiness of stress degree upon each variable of subject, the variable showing the noted difference was the birth weight(γ=-0.16, P=0.04), birth height(γ=-0.23, P=0.03), nursing in the incubator(F=8.93, P=0.04), feed method(F=2.94, P=0.04). That is to say, it is shown which the smaller the birth weight is, the higher the stress degree of mother is noteworthily. Also, the smaller the birth height baby is, the higher the stress of mother is. In the incubator, it os shown which the mother whose baby is nursing in the incubator is higher in the stress degree than other mothers. Upon the feeding method of baby, that is to say, TPNis the highest, and it is shown in the order of NPO, Tube feeding, and P.O. feeding. When we review the above-mentioned results, as the status is serious, it is thought which we include the supporting nursing for coping with the stress of parents in the setting-up od nursing plan for the baby in the NICU.

• Restorative Dentistry and Endodontics
• /
• 제30권6호
• /
• pp.450-460
• /
• 2005

본 연구에서는 복합레진의 중합수축시 와동의 형태, 접착층의 성숙도, 및 와동의 부피가 와동저의 접착면에 발생되는 중합수축응력에 미치는 영향을 평가하였다. 1급 와동 충전시의 응력발생을 모방하기 위해, 98개의 대구치를 $2\times2\times2$ 실험군에 무작위로 분배하고 교합면 상아질을 평탄하게 연마한 후, 복합레진 충전을 위한 몰드의 역할을 할 수 있는 구멍을 가진 iris를 올려놓고 복합레진을 bulk-filling법으로 충전하였다. 각각의 변수로서 와동 형태에 관하여는 iris 재질 (접착제를 도포한 상아질 iris: 높은 C-factor, Teflon 처리된 금속 iris: 낮은 C-factor), 접착층의 성숙도에 관하여는 2종의 접착제 (Scotchbond Multi-purpose와 Xeno III), 와동의 부피에 관하여는 iris내 구멍의 직경 (직경 1 또는 $3mm{\times}높이$) 5mm)을 달리하여 전단접착강도를 측정하였다 와동의 C-factor가 클수록, 접착층의 성숙도가 우수할수록 그리고 부피가 클수록 접착력은 유의하게 감소하였다. 복합레진이 중합될 때, 와동의 형태적 제한에 따라 레진-상아질 접착계면에 발생되는 중합수축응력은 접착이 우수할수록 복합레진의 부피가 클수록 증가되므로, C-factor를 정의할 때 와동의 형태뿐 아니라, 접착층의 성숙도와 복합레진의 부피도 함께 고려되어야 된다.

• 한국재료학회지
• /
• 제18권10호
• /
• pp.547-551
• /
• 2008

Crack-free joining of $Si_3N_4\;and\;Al_2O_3$ using 15 layers has been achieved by a unique approach introducing Sialon polytypoids as a functionally graded materials (FGMs) bonding layer. In the past, hot press sintering of multilayered FGMs with 20 layers of thickness $500{\mu}m$ each has been fabricated successfully. In this study, the number of layers for FGM was reduced to 15 layers from 20 layers for optimization. For fabrication, model was hot pressed at 38 MPa while heating up to $1700^{\circ}$, and it was cooled at $2^{\circ}$/min to minimize residual stress during sintering. Initially, FGM with 15 layers had cracks near 90 wt.% 12H / 10 wt.% $Al_2O_3$ and 90 wt.% 12H/10 wt.% $Si_3N_4$ layers. To solve this problem, FEM (finite element method) program based on the maximum tensile stress theory was applied to design optimized FGM layers of crack free joint. The sample is 3-dimensional cylindrical shape where this has been transformed to 2-dimensional axisymmetric mode. Based on the simulation, crack-free FGM sample was obtained by designing axial, hoop and radial stresses less than tensile strength values across all the layers of FGM. Therefore, we were able to predict and prevent the damage by calculating its thermal stress using its elastic modulus and coefficient of thermal expansion. Such analyses are especially useful for FGM samples where the residual stresses are very difficult to measure experimentally.

• Child Health Nursing Research
• /
• 제2권1호
• /
• pp.55-68
• /
• 1996

Although nursing researchers have performed studies on parent-child relationship actively since early 1980s in Korea, nothing hasn't been tried on the analysis of the contents of researches. We researchers tried examining the trend of researches by investigating treaties on mother-child relationship conducted from 1981 to 1994. The purpose of this study was to analyze the trend of research on the mother-child relationship and to suggest direction for future study. The total numbers of the studies were 27 cases, These studies were analyzed for 1) time of publication 2) research design 3)main concept 4)thesis for a degree or nondegree 5) measurement tool The finding of the analysis were as follows. 1) In the chronological situation, the research on mother-child relationship began to perform in 1981 in the country and had been made most for five years to 1986 with 14 treaties and has decreased since 1990. 2) In the research plan, there are 21 survey(the most) ,5 quasi experimental(before 1986), 1 qualitative. 3) In the subject, the researches on mother-child are the most, 22 and of them 17 treaties on normal infant,4 comparative research on high risk infant and normal infant,5 treaties on mother, 4) The conception of mother-child relationship was used as various conceptions such as affection, union, bonding in early research of 1980s, but it hasn't been used as union bonding but studied mostly as the conception of 'mother-child interaction'since 1986. 5) The measurement tool of research was used variously, the Cropley's tool was used in early 1980s, but Walker's MIPS, Barnard's NCAST were used mostly in 1990. 6) Mother-child interaction influence on mother's self-conception, stress, care and feeding of child, frequency of delivery, planned pregnancy and delivery and health condition of child, birth weight, fetal period, period of mother-child life. Aspects of mother-child interaction composed on visual contact, looking at each other, skinship and caress with finger and fingertip. The leading action of mother-child interaction was mostly uttering action. 7) I suggest that the program for professional education is necessary for the establishment of the aspects of mother-child interaction.

• 터널과지하공간
• /
• 제26권5호
• /
• pp.363-374
• /
• 2016

여러 가지 이유로 단일시험편에서 평면이방성 암석의 5개의 독립적 탄성상수를 결정해야 할 경우, Saint-Venant 근사식은 오랫동안 매우 유용하게 사용되어 왔다. 본 논문은 이 경험적 수식이 겉보기 탄성계수로 표현되는 수식으로 전환될 수 있음을 탄성이론에 근거한 수학적 전개를 통하여 밝히고 있다. 이렇게 전환된 수식은 이방성 각도에 단조증가하는 특성을 갖고 있으며, 이방성 암반의 초기응력측정에 유용하게 사용될 것이다. 문헌의 자료를 분석한 결과, $G^2$의 측정값은 각도와 관계없이 일정한 크기이며, Saint-Venant 근사식에 의하여 유도된 값보다 작은 것으로 분석되었다. 이러한 감분은 층상의 경계면에서 미끄러짐에 의하여 발생하는 것으로 판단되며, 미끄러짐에 의한 감소비율은 층상의 결합상태와 암석의 강도에 따라 유추될 수 있다. 이러한 분석들이 향후에 계속되어 자료가 누적된다면 감소비율을 규정할 수 있고, Saint-Venant 근사식의 수정을 통하여 단일시험편으로부터 탄성상수를 결정할 수 있을 것이다.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.29-40
• /
• 2011

15년 정도의 짧은 역사를 가지고 있는 중온 아스팔트 포장은 국내·외적으로 현재 가장 관심대상이 되는 에너지 절약과 환경보호를 추구하는 도로건설분야의 그린기술이다. 본 연구는 이러한 중온 아스팔트의 물성평가를 아스팔트 덩어리 전체 거동으로 고려한 기존 침입도, 점도, 그리고 수퍼페이브에 의한 아스팔트 시험방식으로부터 벗어나 아스팔트 피막두께에 따른 물성평가로 시각을 바꾸어 새로운 프로토콜을 제시하고 결과분석에 따른 새로운 평가기준제안을 하는 것이 목적이다. 이를 위해 기존에 개발한 DSR Moisture Damage의 실험 및 분석의 기본틀을 ARES장비를 통해 각 피막두께별 물성을 측정하고 분석하였다. 분석결과를 통해 $200{\mu}m$와 $400{\mu}m$ 사이에 물성의 급격한 변화를 볼 수 있는 한계피막두께가 존재하고 또한 가열아스팔트와 중온아스팔트가 가지고 있는 한계피막두께근처에서 발생하는 물성의 급격한 변화가 서로 다르다는 것을 확인할 수 있었다. 이런 결과를 통해 기존 가열 아스팔트와 성질이 다른 중온 아스팔트를 제대로 평가하기 위해서는 $200{\mu}m$와 $400{\mu}m$ 사이 피막두께의 물성평가를 고려해야한다는 것을 제안한다.

• Composites Research
• /
• 제29권3호
• /
• pp.117-124
• /
• 2016

본 연구에서는 스카프 패치로 수리한 복합재 단일겹침 체결부의 파손강도를 시험과 해석으로 연구하였다. 스카프 비, 모재의 적층패턴, 결함크기를 달리 하며 총 45개의 시편에 대한 시험을 수행하여 파손강도와 파손모드를 분석하였다. 다양한 형상의 시편에 대한 시험 결과, 한 경우를 제외하고는 수리 후의 체결부가 결함이 없는 체결부 강도 이상의 강도를 회복하며, 체결부 인자에 따른 특별한 차이는 나타나지 않는 것을 확인하였다. 파손강도가 낮게 나타난 한 경우에 대한 파손면 분석결과 모재의 표면층인 평직층의 표면처리가 충분치 않은 것이 원인인 것으로 판단되었다. 시험 결과의 분석을 위해 3차원 유한요소해석을 수행하였는데, 유한요소해석에서도 고려한 체결부 인자가 상하부 모재와 패치, 접착층에서의 응력에 큰 영향을 미치지 않는 것을 확인하였다. 이는 단일겹침 체결부의 경우 외부 인장하중이 겹침영역을 통과하면서 상하부 모재로 분산되기 때문인 것으로 판단된다. 시험과 해석 결과 모재 중앙에 결함이 존재하는 단일겹침 체결부의 경우 절차에 따라 패치 접착이 이루어지고, 모재의 표면처리가 충분히 이루어진다면 수리를 통해 손상 전 강도를 회복할 수 있는 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.429-429
• /
• 2007

For various applications of liquid crystal displays (LCDs), the uniform alignment of liquid crystal (LC) molecules on treated surfaces is significantly important. Generally, a rubbing method has been widely used to align the LC molecules on polyimide (PI) surfaces. Rubbed PI surfaces have suitable characteristics, such as uniform alignment. However, the rubbing method has some drawbacks, such as the generation of electrostatic charges and the creation of contaminating particles. Thus, we strongly recommend a non contact alignment technique for future generations of large high-resolution LCDs. Most recently, the LC aligning capabilities achieved by ultraviolet and ion-beam exposures which are non contact methods, on diamond-like carbon (DLC) inorganic thin film layers have been successfully studied because DLC thin films have a high mechanical hardness, a high electrical resistivity, optical transparency, and chemical inertness. In addition, nitrogen-doped DLC (NDLC) thin films exhibit properties similar to those of the DLC thin films and a higher thermal stability than the DLC thin films because C:N bonding in the NDLC thin filmsis stronger against thermal stress than C:H bonding in the DLC thin films. Our research group has already studied the NDLC thin films by an ion-beam alignment method. The $SiN_x$ thin films deposited by plasma-enhanced chemical vapor deposition are widely used as an insulation layer for a thin film transistor, which has characteristics similar to those of DLC inorganic thin films. Therefore, in this paper, we report on LC alignment effects and pretilt angle generation on a $SiN_x$, thin film treated by ion-beam irradiation for various N ratios