• Journal of Korean Association for Spatial Structures
• /
• v.23 no.4
• /
• pp.97-105
• /
• 2023

The membrane structure should maintain the membrane materials in tension for structural stability guaranty. The anchoring part in the membrane structure is an important part. It has the function to introduce tension into membrane materials and function to transmit stress which membrane materials receives to boundary structure such as steel frames. In this paper, it grasps anchoring system of the anchoring part in the membrane structure concerning the fracturing characteristic condition of membrane structure, and the influence which is caused to yield it designates the stress state when breaking the membrane structure which includes the anchoring part and that stress transition mechanism is elucidated as purpose. This paper follows to previous paper, does 1 axial tensile test concerning the bolting part specimen, grasp of fracturing progress of the bolting part and the edge rope and hardness of the rubber, does the appraisal in addition with the difference of bolt tightening torque. As a result, the influence which the bolt anchoring exerts on the fracturing characteristics of the membrane material in the membrane structure anchoring part is examined.

• Structural Engineering and Mechanics
• /
• v.26 no.6
• /
• pp.673-685
• /
• 2007

Reinforced concrete beams can be strengthened in a structural retrofit process by attaching steel plates to their sides by bolting. Whilst bolting produces a confident degree of shear connection under conditions of either static or seismic overload, the plates are susceptible to local buckling. The aim of this paper is to investigate the local buckling of unilaterally-restrained plates with point supports in a generic fashion, but with particular emphasis on the provision of the restraints by bolts, and on the geometric configuration of these bolts on the buckling loads. A numerical procedure, which is based on the Rayleigh-Ritz method in conjunction with the technique of Lagrange multipliers, is developed to study the unilateral local buckling of rectangular plates bolted to the concrete with various arrangements of the pattern of bolting. A sufficient number of separable polynomials are used to define the flexural buckling displacements, while the restraint condition is modelled as a tensionless foundation using a penalty function approach to this form of mathematical contact problem. The additional constraint provided by the bolts is also modelled using Lagrange multipliers, providing an efficacious method of numerical analysis. Local buckling coefficients are determined for a range of bolting configurations, and these are compared with those developed elsewhere with simplifying assumptions. The interaction of the actions in bolted plates during buckling is also considered.

• Research in Plant Disease
• /
• v.17 no.1
• /
• pp.95-98
• /
• 2011

This research was carried out to selection of desirable cultivar for organic cultivation of carrot in Korea. The assay of disease resistance, insect tolerance and rate of bolting were investigated on 32 cultivars of genetic resources of carrot. This experiment was carried out at experimental field and greenhouse of Gangneung-Wonju National University. 'PI 223360' was resistant against powdery mildew. Ten cultivars including 'Oxheart Carrot Heirloom' were moderately resistant, 22 cultivars including 'Long Impeator #58' were susceptible to powdery mildew. Although there was no resistant cultivar against black rot and leaf blight, our results showed that several cultivars have moderate resistance. Thirteen cultivars including 'Oxheart Carrot Heirloom' were having insect (Erythroplusia pyropia) tolerance and 'SA 102' and 'Scarlet Keeper Carrot Rare' were susceptible. According to the investigation of bolting, 6 cultivars including 'Hongsim Ouchon Carrot' were early bolting and 4 cultivars including 'Japanese Imperial Long Carrot' were moderate bolting. Other cultivars were identified as late bolting. From above results, we confirmed that 'Oxheart Carrot Heirloom' was suitable cultivar for organic cultivation among 32 genetic resources of carrot.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.215-222
• /
• 2015

The radish (Raphanus sativus L.) is an important Brassicaceae root vegetable crop worldwide. Several studies have been conducted concerning radish breeding. There are major challenges to prevent premature bolting in spring plantings. Here, we performed the characterization of two inbred radish lines which vary in bolting time. "Late bolting radish" (NH-JS1) and "early bolting radish" (NH-JS2) were generated by a conventional breeding approach. The two inbred lines showed different bolting phenotypes depending on vernalization time at $4^{\circ}C$. NH-JS1, the late bolting radish, was less sensitive to cold treatment and the less sensitivity was inversely proportional to the duration of the vernalization. We also measured gene expression levels of the major bolting time related genes in the NH-JS1 and NH-JS2 lines. RsFLC1 plays a central role in the timing of flowering initiation. It is a strong repressor and it's transcript is highly expressed in NH-JS1 compared to NH-JS2 under no treatment and vernalization conditions. RsFRI, a positive regulator of RsFLC, is also highly expressed in NH-JS1 compared to NH-JS2 regardless of vernalization. In contrast, RsSOC1, suppressed by FLC as a floral integrator gene, showed the most difference, a 5-fold increase, between NH-JS1 and NH-JS2 under vernalization conditions. From these results, we conclude that NH-JS1 showed a late flowering phenotype after cold treatment due to the expression differences of flowering time regulator genes rather than difference sensitivity to cold. These results may be useful to understand the control mechanisms of flowering time and may help identify molecular markers for selecting late bolting trait in radish.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.114-120
• /
• 1994

Experiment was conducted to investigate the effects of planting date and planting methods with seedling size on bolting and yield of Ostericum koreanum (MAX.) KITAGAWA Seeding methods were also reviewed to imvestigate their effects on seedling characteristics. This experiment was carried out in Chuncheon during 1988 growing season. The small seeding rate and broadcasting had higher rates of emergence than the others. There was no big difference in seedling size by seedling rate, and more seedling growth was in drilling methods among seed planting methods. The quantity of seedling were produced with the order of medium, small and lastly large seedling. Dense planting $(8l\;/33m^2)$ was advantageous in producing small seedling. Large seedling had earlier flowering than the others and growth was good in planting small seedling with drilling method. The rates of bolting by seedling sizes were 89.6% in large, 64.6% in medium and 36.9% in small seedling. Bolting was influenced the root Quality by producing lignified root which had a least commercial value. More root growth was shown in unbolting plant compared to bolting plant seedling and broadcasting had much more root growth than seedling from drilling. Fresh root yield of unbolting plant was higher than that of bolting plant and highest yield was obtained in the broadcasting plot with small seedling.

• Korean Journal of Plant Resources
• /
• v.8 no.1
• /
• pp.55-62
• /
• 1995

This study was carried out to investigate the effects of floral inhibition of Angelica gigas NAKAI in the hilly altitude located in the Northern Gyeongbuk Province from Feb. 1992 to 1994. The results obtained were as follows: As the cultivated areas are high, rate of bolting was significantly decreased, having high yield, good growth, and medicinal quality. It is considered that the optimal cultivating area was at least above 600m altitude. In the hilly altitude, the more shorten nursery period was, the more decreased rate of bolting was, it results in decreased yield, having no significant differences in contents such as extract and decursin. In bolting response from temperature treatment of the seedlings, treatment of temperature was significantly decreased floral induction, but rate of establishment was decreased by decayed root. Bolting rate at different organic resources has more reduced in single fertilization than that of in organic application, but among organic resources, compost of rice straw has the lowest bolting rate. As a result, yield and medicinal qualities at various organic resources were increased in application of organic resources which was no considerable tendency among organic resources.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.426-430
• /
• 1994

To establish the proper size of seedling of A. gigas, different weight of seedlings were used for this study. Agronomic characters including plant height, number of leaf, leaf length, number of inflorescence, fresh weight and rate of bolting of the aerial parts, root length, root diameter, number of lateral root and root weight of the underground parts were determined and correlation coefficients among them were estimated. Growth of A. gigas showed the significant vigor for all the characters of the aerial parts along with increasing of seedling weight, but root weight in yield decreased in proportion to increasing of seedling weight due to lignification of the root tissue. When the smaller seedlings were transplanted, bolting rates decreased to about 16% as compared with the traditional size of seedlings. Correlation coefficients between aerial and root characters in A. gigas were negative, and the characters such as plant height, number of leaf, number of inflorescence and fresh weight per plant showed highly significant correlation with the rate of bolting which is one of the characters having great influence on yield.

• Plant Resources
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2004

Root chicory (Cichorium intybus L. var. sativus) is potential alternative medicinal and sugar crop which accumulates a high amount of linear polyfructan, inulin in its roots. A problem in root production is that over-wintered stock plants often flower. Once the plant becomes reproductive, stem elongation and root growth slows and floral buds arise from every node, rendering the plants useless for propagation. The objectives of this research was to examine the effectiveness of manipulating environmental factors containing photoperiod, temperature and number of leaf states. The experiment was performed in growth chamber to create two photoperiods (8 h, and 16 h) with three temperature regimes (5$^{\circ}C$/3$^{\circ}C$, 1$0^{\circ}C$/8$^{\circ}C$ and 15$^{\circ}C$/13$^{\circ}C$ day/night temperature) for a total of six treatments on three type of true-leaf stage of plant. Data of bolting rate, shoot and root length, shoot and fresh weight was invetigated in each treatments. This is the first report on changes in bolting rate and shoots and roots production during a whole growing season and differences in the effect of cold and photoperiod treatment depending on the true-leaf stage of plant.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.9
• /
• pp.44-51
• /
• 2007

There are many methods to assemble various parts of a product, and one of them is the bolting system widely used in a industrial field due to the merits; easiness to obtain strong tightening force, simplicity of assemble or disassemble in order to repair, substitution or cleaning, and so on. But this bolting system needs attachments not to let a bolt loose and they are an important factor to cost a great deal. In this study, some equations are suggested and FE analyses are carried out to verify the cause of the bolt looseness occurring in the tightening process. And because the number of bolts in the bolting system has been decided by empirical know-how of designers in the field, safety rate in the plate type heat exchanger is often too high. Therefore the equations to decrease in quantity are suggested in consideration of the relationship between a critical shearing force acting on the screw and a normal force acting on the cooling plate by the working fluid.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1316-1322
• /
• 2011

Most of the mechanical structures use bolting or spot welding for the whole structure. In recent years, bolting & rivets are used rather than the welding due to reassembly and repair. Analysis of bolted joints is so complicate that many conditions must be considered such as pre-load and contact, etc.. Bolted joint analysis is done by theoretical, experimental & numerical methods. However, numerical analysis in the bolted joint is used because the contact and stress in the joints are changed due to the pre-load. In this study, we analysis the slip and the deformation of the contact area in the joint depending on the pre-load and find the optimized bolting condition.