• Journal of Microbiology
• /
• v.44 no.5
• /
• pp.562-565
• /
• 2006

The cell counting of colonial Microcystis spp. is a rather difficult and error-prone proposition, as this genus forms irregularly-shaped and irregularly-sized colonies, which are packed with cells. Thus, in order to facilitate a cell count, four methods of dividing the colonies into single cells were compared, including vortexing, sonication, $TiO_2$ treatment, and boiling. As a result, the boiling method was determined to generate the greatest number of single cells from a colony, and all colonies were found to have divided completely after only 6 min of treatment. Furthermore, no significant cell destruction, which might alter the actual cell density, was detected in conjunction with the boiling method (P=0.158). In order to compute the cell number more simply, the relationship between the colony size and the cell number was determined, via the boiling method. The colony volume, rather than the area or diameter was correlated more closely with the cell number ($r^2=0.727$), thereby suggesting that the cell numbers of colonial Microcystis sp. can also be estimated effectively from their volumes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.4
• /
• pp.451-458
• /
• 2009

This experimental study was conducted to investigate macroscopic characteristics of the flash boiling spray with tow component mixing fuel. Homogeneous Charge Compression Ignition (HCCI) is a newer combustion method for internal combustion engines to reduce nitrogen oxide and particulate matter simultaneously. But it is difficult to put this combustion method to practical use in an engine because of such problems as instability of combustion in low load operating conditions and knocking in high load operating conditions. In HCCI, combustion characteristics and exhaust emissions depend on conditions of air/fuel mixture and chemical reactions of fuel molecules. The fuel design approach is achieved by mixing two components which differ in properties such as density, viscosity, volatility, ignitability and so on. We plan to apply the fuel design approach to HCCI combustion generated in a real engine, and examine the possibility of mixture formation control using the flash boiling spray. Spray characteristics of two component fuel with a flash boiling phenomenon was investigated using Shlieren and Mie scattering photography. Test fuel was injected into a constant volume vessel at ambient conditions imitated injection timing BTDC of a real engine. As a result, it was found that a flash boiling phenomenon greatly changed spray structure, especially in the conditions of lower temperature and density. Therefore, availability of mixture formation control using flash boiling spray was suggested.

• Nuclear Engineering and Technology
• /
• v.32 no.1
• /
• pp.34-45
• /
• 2000

This study is concerned with the experimental test and numerical analysis of the heat transfer and solidification of the molten metal pool with overlying coolant with boiling. In the test, the metal pool is heated from the bottom surface and coolant is injected onto the molten metal pool. Experiments were performed by changing the test section bottom surface temperature of the metal layer and the coolant injection rate. The two-phase boiling coolant experimental results are compared against the dry test data without coolant or solidification of the molten metal pool, and against the crust formation experiment with subcooled coolant. Also, a numerical analysis is performed to check on the measured data. The numerical program is developed using the enthalpy method, the finite volume method and the SIMPLER algorithm. The experimental results of the heat transfer show general agreement with the calculated values. The present empirical test and numerical results of the heat transfer on the molten metal pool are apparently higher than those without coolant boiling. This is probably because this experiment was performed in concurrence of solidification in the molten metal pool and the rapid boiling of the coolant. The other experiments were performed without coolant boiling and the correlation was developed for the pure molten metal without phase change.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1990.10a
• /
• pp.97-110
• /
• 1990

This paper presents a case history of a deep open cut excavation of Nakagawa section for Futuoka Subway construction which adopted observational mettled against boiling failure and completed with success by modifying construction based upon field monitoring. One of the difficult conditions for the excavation was sandy layer with high water pressure which was anticipated boiling failure. The boiling was generally considered as one of the difficult phenomena to work with the observational method because of its unpredictable catastrophic nature. Laboratory experiments showed the existence of the prefailure movements of the ground and the possibility of the application of the observational method against the boiling failure. Construction step was planned to be modified, if necessary, based upon field monitoring and was completed with success.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.472-473
• /
• 2008

Flow boiling in parallel microchannels has received attention as an effective heat sink mechanism for power-densities encountered in microelectronic equipment. the bubble dynamics coupled with boiling heat transfer in microchannels is still not well understood due to the technological difficulties in obtaining detailed measurements of microscale two-phase flows. In this study, complete numerical simulation is performed to further clarify the dynamics of flow boiling in microchannels. The level set method for tracking the liquid-vapor interface is modified to include the effects of phase change and contact angle. The method is further extended to treat the no-slip and contact angle conditions on the immersed solid. Also, the reverse flow observed during flow boiling in parallel microchannels has been investigated. Based on the numerical results, the effects of channel shape and inlet area restriction on the bubble growth, reverse flow and heat transfer are quantified.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.6
• /
• pp.45-53
• /
• 2011

Multiphase lattice Boltzmann method (LBM) has been used to simulate the nucleate pool boiling directly. For the phase change model, the thermal model and the Stefan boundary condition were introduced to the isothermal LBM. The phase change model was validated by the bubble growth in a superheated liquid under no gravity. The bubble growth on and departure from a superheated wall has been simulated successfully. The preliminary results showed that the detail process of nucleate pool boiling was in good agreement with the experimental results.

• Solar Energy
• /
• v.19 no.2
• /
• pp.45-56
• /
• 1999

The performance of vertical and horizontal tubes with extended surface of rectangular and triangular cross section was investigated theoretically for boiling heat transfer. A simple method for numerical program assuming one-dimensional heat flow was used to predict the performance of these extended surface tubes. The object of this study was to predict the effects of the height, thickness, numbers and, clearance of the extended surface on boiling heat transfer. The results showed that extended surfaces are quite effective as compared to plane surfaces especially near the bum-out point and to promote heat flux in boiling heat transfer.

• Herbal Formula Science
• /
• v.8 no.1
• /
• pp.11-37
• /
• 2000

This is a study on the methods of decocting prescriptions in SANGHANRON (傷寒論), and after this, numbers of results have been obtained. SANGHANRON was written by Chang-Ki (張機) in the 2nd century, so it reflexes the usage of prescriptions of previous age indirectly. And gave affects on the methods of decocting prescriptions to the oriental medicine doctors of next generation.Berore Han-DYnasty(漢代), there were not so many publications connected with Oriental Medicine. Besides, some books couldn't hand down to next generation due to the gap of time and space. As time goes by, letters in medical books changed little by little, so contents connected with decocting methods changed too. The effects of decoction and herb tea can be changed by the flexibility of methods of decocting medicines, so we have to decide what kinds of decocting methods should be taken and adapted to patients by the most effective way.In SANGHANRON, there are many kiny kinds of boiling methods, so DHAMG-Ki selected the most appropriate method considering deree and position of disease and condition of patient. But nowadays, due to inconvenient procedure of boiling and taking medicines, some methos are not in common in clinical medicin. So this study was started to look back upon the changes of decocting prescriptions and gave deffort to find out the propriety of variation of boiling prescriptions.The common method of decocting prescriptions in SANGHANRON is boiling down all the herbs at the same time. Except the commom method, there are some kinds of other methods - boiling down twice the prescription, boiling down some special herbs earlier of later than other herbs, complicated or special boiling methods of extract, etc. These kinds of decoting methods simplified as time pass by, but this expected therapeutic value. So we have to distinguish the methods -though complicated and troublesome- in clinical medicine to make perfection more perfect in treating patients, and further studies have to be followed to prove the propriety of these complicated methods.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.35-40
• /
• 1992

A recently developed new technique for measuring the fraction of wetted area has applied to pool boiling of water. The basis of the new applied technique of ultrasonic makes use of the reflection of ultrasonic from the vapour surface to measure the fraction of wetted area values. The results are the measured fraction of wetted area values in nucleate and transition boiling and the pool boiling curve for water under steady state conditions. The measurement of this paper shows a fraction of wetted areaf around 0.98 at the critical heat flux for water.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.9-16
• /
• 2006

The present study is to simulate coolant flow in IC engine cooling passages under subcooled nucleate boiling conditions and investigate thermal stress analysis of the solid part. To consider nucleate boiling heat transfer effect, Chen's empirical formula is used through user subroutine programing in CFD code and then nucleate boiling model is compared with Robinson's experimental results, which shows reasonable agreement. This Chen's nucleate boiling model is applied to single cylinder IC engine model and we do cylinder liner thermal stress analysis using commercial FEM code.