• Food Science of Animal Resources
• /
• v.40 no.3
• /
• pp.338-349
• /
• 2020

The effects of organic Zn-L-selenomethionine (Zn-L-SeMet) at 0.3 ppm on carcass composition, meat characteristics, fatty acid composition, glutathione peroxidase activity, and ribonucleotide content were compared against the commercial inorganic sodium selenite (Na-Se) and the combination of the two, in commercial broilers. A total of 540 one day-old chicks were assigned at random to 3 dietary treatments : i) commercial inorganic selenium as control or T1, ii) a 1:1 ratio of inorganic and organic selenium as T2, and iii) organic selenium as T3. Carcass composition, meat characteristics, cholesterol content, fatty acid composition, and ribonucleotide content were generally unaffected by treatments. However, discrepancy were significantly observed in glutathione peroxidase activity (GSH-Px) and water holding capacity, with organic selenium showing higher glutathione peroxidase activity (p<0.01) and lower shrinkage loss (p<0.05), respectively. These findings could be explained by the contribution of organic selenium in bioavailability of GSH-Px. However, having conducted in a commercial close house system with sufficient amount of nutritional supplementation, the present study demonstrated little or no effects of organic Zn-L-SeMet on meat characteristics, fatty acid composition, and ribonucleotide content (flavor characteristic) in broiler chickens.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.168-172
• /
• 2011

Alumina powder was added in a general porcelain (Backja) with clay, feldspar and quartz contents to promote the mullite ($3Al_2O_3{\cdot}2SiO_2$) generation in the porcelain. Low melting materials ($B_2O_3(450^{\circ}C)$, $MnO_3(940^{\circ}C)$, CuO($1080^{\circ}C$)) were doped at ~3 wt% to modify the sinterability of porcelain with a high alumina contents and promote the mullite generation. Green body was made by slip casting method with blended slurry and then, they were fired at $1280^{\circ}C$ for 1hr by a $2^{\circ}C/min$. Densifications of samples with high alumina contents (20~30 wt%) were impeded. As the doping contents of low melting materilas increased, the sinterability of samples was improved. The shrinkage rate and bulk density of samples were improved by doping with low melting materials. Mullite phase increased with increasing the low melting contents in the phase analyses. This means lots of alumina and quartz were transformed into mullite phase by low melting contents doping. In the results, high bending strength of samples with high alumina contents was accomplished by improving the densification and mullite generation in the porcelain.

• YAKHAK HOEJI
• /
• v.41 no.1
• /
• pp.86-93
• /
• 1997

Even though both N-methyl-4-phenyl-1,2,5,6-tetrahydropyridine (MPTP) and 6-hydroxydopamine have been widely used to establish the experimental model for dopaminergic neuronal ce ll death. mechanisms underlying this phenomenon have not been firmly explored. To investigate how these dopaminergic neurotoxins induce neuronal cell death, murine dopaminergic neuronal cell line, MN9D cells were treated with various concentration of either 6-hydroxydopamine or active form of MPTP, N methyl-4-phenylpyridinium (MPP$^+$). Treatment of cells with 5-100 uM 6-hydroxydopamine resulted in apoptotic cell death whereas cell death induced by 5~50 uM MPP$^+$ was not demonstrated typical apoptotic characteristics such as cell shrinkage, apoptotic body and nuclear condensation. Cell death induced by 6-hydroxydopamine was partially blocked in the presence of antioxidants including soluble form of vitamin E or desferrioxamine suggesting that generation of oxidative stress may be associated with 6-hydroxydopamine-induced cell death in MN9D cells. In contrast, MPP$^+$-induced cell death was not blocked by treatment with any of antioxidants tested. As previously demonstrated that MPP$^+$ caused metabolic alterations such as glucose metabolism, removal of glucose from the medium partially inhibited MPP$^+$-induced cell death suggesting excessive cycles of glycolysis may be associated with MPP$^+$-induced cell death. Taken together, these studies demonstrate that two types of dopaminergic neurotoxins recruit distinct neuronal cell death pathways.

• The Korean Journal of Zoology
• /
• v.21 no.3
• /
• pp.87-102
• /
• 1978

Electron microscopic studies were made to investigate changes in the fine structure of the liver, kidney and gills of Carassius carassius L. following exposure to 1 and 2.5 ppm of $HgCl_2$. The following results were obtained: 1. In the mercury-treated liver cells, an increase in the number of lysosomes were noticed. These lysosomes appeared to be of two types; round ones containing some crystalline structures and others with phagocytosed glycogen granules and mitochondria. Also observed were mitochondrial swelling where the matrix appeared less electrondense, and segregation of the nucleoli in the nucleus. 2. In the kidney, mercury treatment resulted in thickening of the basement membrane of the glomerulus, and appearance of vacuoles and cytoplasmic bodies in the proximal convoluted tubule. The vacuoles seemed to be formed from mitochondria. Nuclear shrinkage was also noticed at 2.5 ppm of $HgCl_2$. 3. Many large and small lysosomes appeared in response to mercury in the epithelial cells of the gill lamella. Also the lamellar membrane became fuzzy in appearance. 4. It can be concluded from these results that mercury-induced changes in the fine structure are associated with activation of detoxication processes and impairment of energy metabolism.

• Journal of the Korean Ceramic Society
• /
• v.49 no.6
• /
• pp.592-600
• /
• 2012

Conventional methods for preparing ceramic bodies, such as cold isostatic pressing, gypsum-mold slip casting, and filter pressing are not completely suitable for fabricating large and thick ceramic plates owing to disadvantages of these processes, such as the high cost of the equipment, the formation of density gradients, and differential shrinkage during drying. These problems can be avoided by employing a pressure-vacuum hybrid slip casting approach that considers not only by the compression of the aqueous slip in the casting room (pressure slip casting) but also the vacuum sucking of the dispersion medium (water) around the mold (vacuum slip casting). We prepared the alumina formed bodies by means of pressure-vacuum hybrid slip casting with stepwise pressure loading up to 0.5 MPa using a slip consisting of 40 vol% solid, 0.6 wt% APC, 1 wt% PEG, and 1 wt% PVA. After drying the green body at $30^{\circ}C$ and 80% RH, the green density of the alumina bodies was about 56% RD. The sintered density of an alumina plate created by means of sintering at $1650^{\circ}C$ for 4 h exceeded 99.8%.This method enabled us to fabricate a $110{\times}110{\times}20$ mm alumina plate without cracks and with a homogeneous density, thus demonstrating the possibility of extending the method to the fabrication of other ceramic products.

• Journal of Sleep Medicine
• /
• v.15 no.2
• /
• pp.48-54
• /
• 2018

Objectives: The aim of this study was to develop a predicting model for the optimal continuous positive airway pressure (CPAP) for obstructive sleep apnea (OSA) patient with obesity by using a machine learning. Methods: We retrospectively investigated the medical records of 162 OSA patients who had obesity [body mass index (BMI) ≥ 25] and undertaken successful CPAP titration study. We divided the data to a training set (90%) and a test set (10%), randomly. We made a random forest model and a least absolute shrinkage and selection operator (lasso) regression model to predict the optimal pressure by using the training set, and then applied our models and previous reported equations to the test set. To compare the fitness of each models, we used a correlation coefficient (CC) and a mean absolute error (MAE). Results: The random forest model showed the best performance {CC 0.78 [95% confidence interval (CI) 0.43-0.93], MAE 1.20}. The lasso regression model also showed the improved result [CC 0.78 (95% CI 0.42-0.93), MAE 1.26] compared to the Hoffstein equation [CC 0.68 (95% CI 0.23-0.89), MAE 1.34] and the Choi's equation [CC 0.72 (95% CI 0.30-0.90), MAE 1.40]. Conclusions: Our random forest model and lasso model ($26.213+0.084{\times}BMI+0.004{\times}$apnea-hypopnea index+$0.004{\times}oxygen$ desaturation index-$0.215{\times}mean$ oxygen saturation) showed the improved performance compared to the previous reported equations. The further study for other subgroup or phenotype of OSA is required.

• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.17-31
• /
• 1982

A physician assumes toward his patient the obligation to use such reasonable care and skill as is commonly possessed and exercised by physicians in the same general line of practice in the same or similar localities and to use his best judgment at the times. Medical disputes between physicians and patients are, ever more increased in these days as human body, happens to cause a variety of changes in body unlike the function of machine. Such increased trends of medical disputes became a problem in common across the word under the influence of affluent living standard, high consciousness of life value and right by today's people. The aim of this dissertation is oriented to forming a physician's responsibilities in medicalcare accidents arising between physicians and patients. A general physician, for example, has not been negligent merely because, a specialist might have treated the patient with greater skill and knowledge. However, the fact that a physician may have acted to the best of his ability will not avoid legal problems for damages resulting from substandard treatment, that is the degree of care and skill which is to be expected of the ordinary practitioner in his field of practice. The duty of a physician who is, or holds himself out to be, a specialist is greater in the field of his specialty than one who is a general physician. A patient's consent to routine medical procedures is implied from the fact that patient comes to the physician with a medical problem and voluntarily submits to the procedures. For the more serious medical procedures and for major operations, however, it is preferable for the physician to have the patient's consent in writing, to facilitate proof of the consent in the event of a dispute or litigation. Suppose that mistakes on the part of physicians are likely to be blamed in all cases of malpractice. Then it will create a sort of shrinkage in activities of medical treatment. There should be some limitation on excessive application of 'The thing speaks for itself' on mistakes by physicians and availablity of cause and effect. It is a matter of complicity as well as a matter of importance to draw a definite boundary on responsibilities of physician. A series of further research on this particular aspect is strongly urged.

• Journal of Nutrition and Health
• /
• v.6 no.4
• /
• pp.37-53
• /
• 1973

For the elucidation of the metabolic effects due to alcoholic drink and moldy rice intake author designed two experiments as follows. In the first experiment, sixty male and female rats, divided into six groups, 10 rats each in both sexes, were given 7.5% sucrose-30% alcohol solution (Jinro-Soju) and diets varied of fat content (2%, 7%, 30% of diet) and protein quality (casein, bean, anchovy) for 6 weeks. In the Second experiment, six groups of rats, 10 male rats each, were fed the diets containing zero, 5%, 10%, 25%, 50%, and 100% moldy rice contaminated Penicillium Islandicum and the experimental periods were 4 weeks and 6 weeks. The results of these studies due to the toxicity of alcohol consumption and moldy rice ingestion of the fatty liver production and the other effects are as follows. 1. Food intake of alcohol consumed groups decreased to 50%-70% of that of standard group. In the second study, there was no significant differences on food intake due to the different contents of moldy rice and experimental period. 2. On the view paint of body weight gain, the body weight of alcohol consumed groups gained much less than that of standard group, because food consumption was decreased due to alcohol ingestion. 3. In comparison of F.E.R. and P.E.R. between standard and experimental groups, there was no significant differences in this study. 4. As a matter of fact, there was no significance on the nitrogen balance in both studies. 5. From the result of hematology, R.B.C. counts, W.B.C. counts, hemoglobin, and hematocrit showed normal values in all groups including in this study. So we might conclude that the toxicity of alcohol and moldy rice do not effect significantly on blood picture. 6. The larger organs shrank on the range of 20%-70% of that against standard group in this study. The major reason for the shrinkage of organs might be account of decreased food consumption due to alcoholic drink. There was no great changes on the organ weight due to the ingestion of moldy rice. 7. The nitrogen content in various organs in both experiments was revealed at the normal level for the worst condition in terms of the least food intake. In other word, it was noteworthy that the concentration of nitrogen in various organs was kept at the normal ratio as standard groups under the circumstances of this study. 8. The lipid content in the liver of rats fed alcohol and diets containing either various lipid contents or protein quality did not increase. Hepatic lipids accumulation due to the dietary fat content was observed, but there wvas no significances among the compared groups. In the second experiment, the difference of hepatic lipid content between the moldy rice groups and standard group was not showed. In addition to the result of total lipid, hepatic free cholesterol, free fatty acid, and triglyceride did not change in both studies, we might conclude that the toxicity of alcohol and moldy rice could not effect on the hepatic lipid contents. 9. There was no significant differences on the serum glucose level between alcohol groups and standard group. In the second experiment, serum glucose level increase in 6th week compared with in 4th week, but there was no significant differences.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.383-402
• /
• 2013

In this study, we apply the facial Facial Action Coding System for coding the muscular system anatomical approach facial expressions to be displayed in response to a change in sensitivity. To verify by applying the virtual character the Duchenne smile to the original. I extracted the Duchenne smile by inducing experiment of emotion (man 2, woman 2) and the movie theater department students trained for the experiment. Based on the expression that has been extracted, I collect the data of the facial muscles. Calculates the frequency of expression of the face and other parts of the body muscles around the mouth and lips, to be applied to the virtual character of the data. Orbicularis muscle to contract end of lips due to shrinkage of the Zygomatic Major is a upward movement, cheek goes up, the movement of the muscles, facial expressions appear the outer eyelid under the eye goes up with a look of smile. Muscle movement of large muscle and surrounding Zygomatic Major is observed together (AU9) muscles around the nose and (AU25, AU26, AU27) muscles around the mouth associated with openness. Duchen smile occurred in the form of Orbicularis Oculi and Zygomatic Major moves at the same time. Based on this, by separating the orbicularis muscle that is displayed in the form of laughter and sympathy to emotional feelings and viable large muscle by the will of the person, by applying to the character of the virtual, and expression of human I try to examine expression of the virtual character's ability to distinguish.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.449-456
• /
• 1999

The concrete wall is the most useful of retaining structure which can obtain the engineering stability, but has problems that is not friendly with nature environment in a fine view, such as poor rear drainage, and shrinkage crack by temperature difference, etc. Because of this problems, the research for a segmental crib retaining wall has been performed. A segmental crib retaining wall is quickly and easily erected because is possible to be erected as the individual members, and is not sensitive to differential settlement and earthquakes. Also, it shows effective drainage and has a friendly advantage with nature environment because of being able to be planted with vines and shrubs in retaining walls The design of crib retaining walls has traditionally been based on classical soil mechanics theories. These theories, originally derived by Rankine(1857) and Coulomb(1776), assume that the wall acts as a rigid body. This assumption results in failure being predicted by either monolithic overturning or base sliding mechanisms. However, the wall consists of individual members which have been created a three dimensional grid. This grid confines an fill mass which becomes part of the wall. The filled wall resists the earth pressure with the same mechanism of classical gravity walls. Because of the flexibility of the individual segment, it allows relative movement between the individual members within the wall. The three dimensional flexible grid leads to stress redistribution when the wall is subjected to external or fill loads. Due to the flexibility and the stress redistribution, the failure of segmental crib wall consists of not only overturing and base sliding but the local deformation and the failure between the segmental members. It has been researched in the field that due to this flexibility and load redistribution, serviceability failure of segmental crib walls is unlikely to be due to overturning or base sliding. Therefore, in this study, the relative displacement appearance of retaining wall due to variation of inclination is measured to examine this behavior characteristics. Also, the behavior characteristics of retaining walls by surcharge load, and location of acting point of retaining wall rear, and the displacement characteristics and deflections are estimated about the existence and nonexistence of Rear Stretcher performing an role in transmitting earth pressure of Header and Stretcher organizing retaining walls. This research focuses on the characteristics due to the behavior of retaining walls. This research focuses on the characteristics due to the behavior of retaining walls.